User manual BOSCH Coffee maker : 177 free PDF user manuals

Q: The 6 indicator lights are flashing after descaling, what should I do?

After descaling your Bosch TKA3A034 coffee maker, the flashing indicator lights indicate that the rinsing cycle is not complete or that the machine requires a reset. Steps to follow: Complete the rinsing cycle - After descaling, fill the water tank with clean water and run 2 full water cycles without coffee to thoroughly rinse the device. Wait for the automatic end - Allow the cycles to finish completely. The lights should turn off once the rinsing process is completed. Turn off and on - If the lights continue to flash, turn off the machine, wait 10 seconds, then turn it back on. Check the water tank - Ensure that the tank is properly filled with clean water before restarting a cycle. If the lights continue to flash after these steps, it is possible that the descaling was not fully completed. In this case, repeat the entire process, ensuring to let the descaling product act for 5 minutes in the tank before starting the cycle.

Q: What do the LED indicators on my coffee machine (coffee+ flashing green and S in red) mean?

On your Benvenuto Classic TCA5202, these LED indicators have specific meanings: LED of the coffee+ symbol flashing green : indicates that the machine is ready to operate and can prepare coffee. LED S lit in red : signals that a maintenance program is required. This includes descaling and cleaning the coffee machine. You should therefore start the maintenance cycle of your device. Refer to the dedicated section of your manual for the steps for descaling and complete cleaning of the machine.

Q: The descaling program of my Bosch TKA8013 coffee maker does not start

If the descaling program ("calc" button) does not start on your Bosch TKA8013 or TKA8653 coffee maker, here are the checks to perform: Preliminary Checks Check the descaling indicator : The "calc" light must be on for the program to be available. If the light is not on, descaling is not yet necessary. Fill the tank : Ensure that the water tank is properly filled with the descaling solution (according to the manufacturer's dosage). Do not exceed 6 cups of liquid. Check that the carafe is in place : The glass carafe must be correctly positioned in the machine before starting the program. Starting the Program Press and hold the "calc" button for at least 2 seconds to start the cycle. A short press is not sufficient. The program should then start automatically. If the problem persists If after these checks the program still refuses to start, check that the device is properly powered and that the "calc" button is not stuck or worn. A complete descaling cycle takes about 30 minutes with several pauses.

Q: How do I adjust the strength or intensity of the coffee on the Tassimo MY WAY TAS6504?

Coffee Intensity - On the Bosch Tassimo MY WAY TAS6504, you can adjust the strength or intensity of the coffee using the b button on the control panel labeled "Display Buttons for drink intensity". Important - Not all intensity settings are available for all drinks. The options vary depending on the type of drink selected (coffee, cappuccino, tea, etc.). Depending on your selection, some intensity levels may be automatically disabled by the machine. Access the intensity adjustment button from the control panel and adjust the setting according to your preference, taking into account the options available for your drink.

Q: How can I tell if the coffee maker's descaling is complete?

The BOSCH TKA4M233 has an automatic shut-off that indicates the end of the descaling process. Here’s how to proceed: During descaling: The on/off button and the percolation cycle flash simultaneously On some models, the keep warm function also flashes These light signals confirm that the descaling cycle is in progress When it's finished: The device turns off automatically - this shut-off indicates that the descaling is completely finished. At this point, you can empty the tank and thoroughly rinse the coffee maker with clear water before using it again. Descale regularly (when you see these flashes) to maintain optimal coffee quality and prolong the lifespan of your machine.

Q: What does the water and beans error indicator with arrows mean on my BOSCH Benvenuto Classic TCA5401 coffee maker?

This indicator displays important alert symbols for your Bosch Benvenuto Classic TCA5401 coffee maker. On the machine's screen, two main symbols may light up or blink to indicate a supply issue: Symbol "9" lit : means that the water tank is empty or insufficient. The tank has a capacity of 1.5 liters. You need to fill it immediately. Symbol "555" blinking : means that the bean container is empty. The machine cannot grind the beans if there is nothing in the container. These two indicators may appear alone or together if both tanks are empty. To resolve the issue, you must check and fill both items: Remove the removable water tank, rinse it with pure cold water (without sparkling water), then fill it up to the "max" mark indicated. Reinstall it by pushing it firmly until it clicks into place. Fill the bean container with good quality coffee beans suitable for espresso or percolator. Do not use frozen, caramelized, or sugar-coated beans, as they will clog the grinder. Once both tanks are filled, turn off the machine for a few seconds, then turn it back on. The symbols should disappear, and the machine should be able to operate normally again. If the indicators persist after checking and filling both tanks, there may be a mechanical issue: consult the full manual or contact Bosch customer service (2-year warranty).

Q: What is the capacity of the water tank?

The water tank of the Bosch TAS4212 Tassimo Fidelia has a capacity of 1.5 liters . It is a removable tank. Before each use, fill it with fresh, cold water up to the MAX mark. The tank is equipped with a visual indicator that allows you to easily check the water level. Important tip: only use fresh tap water (no sparkling, mineral, or chemically softened water). If you live in an area with very hard water, schedule more frequent descaling to keep the machine in good condition.

Q: Why does my BOSCH TASSIMO TAS4212 coffee machine only wake up from energy-saving mode when I remove the service disc?

Important: the T DISC Service (service disc) should only remain in the machine during the initial setup and cleaning/descaling cycles. Once the setup is complete (after 4 cycles with the service disc), you must remove it and store it in the compartment at the back of your BOSCH TASSIMO TAS4212. If the disc remains inserted permanently, it may indeed block certain functions. To wake your machine from energy-saving mode (Standby mode): Press the On/Off switch (I/O button) located on the side of the device. The Standby light (in orange) should turn off and the machine will restart normally You can also press the Start button once a normal T DISC (a TASSIMO capsule) is inserted - the machine will exit Standby mode and prepare the drink If your machine does not respond to the On/Off button and remains in Standby mode: First, check that the T DISC Service has been removed and stored at the back of the device after the initial setup - it should not remain inserted permanently Try pressing the On/Off button firmly and several times (do not just make a short press) If you really have to remove the service disc for the machine to work, this indicates a malfunction of the sensor or the standby system of your device If after removing the T DISC Service and storing it correctly at the back of the machine, the device responds normally to the On/Off button, there is no problem. However, if you have to physically remove the disc each time to wake the machine , this is a defect that requires repair. In this case, contact BOSCH customer service (0969 39 29 39 or www.tassimo.com) as this is a malfunction of the disc recognition system or the standby circuit.

Q: Why does the start lamp turn off in energy-saving mode on the TASSIMO TAS4212?

This is normal and intentional behavior. The BOSCH TASSIMO TAS4212 automatically switches to standby mode after 30 minutes of inactivity to save energy. When the machine is in standby, the "Standby" light turns on and the start lamp dims or turns off. There is nothing to worry about: this is a design feature intended to reduce power consumption, exactly as intended. To reactivate the machine: Simply press the On/Off button The lamp will light up again and the machine will be ready to operate You may also note that the machine returns to standby mode about 20 seconds after preparing a drink . This is normal operation that helps extend the lifespan of the device.

Models BOSCH Coffee maker most viewed

User manual BOSCH Coffee maker : user manuals and guides in PDF

Models BOSCH Coffee maker most viewed

Other categories BOSCH

Recent questions about Coffee maker BOSCH