Q: How to clean and maintain the motor protection filter?

Regular cleaning of the motor protection filter The motor protection filter is a crucial component of your BOSCH Serie 4 ProPower BGL41POW2H vacuum cleaner. The manual states that you should clean it regularly to maintain the optimal performance of the device. According to the manual: Never operate the device without the motor protection filter in place If the suction power decreases, one possible cause is that the motor protection filter is clogged The cleaning procedure is illustrated in Figures 27-29 of the manual To access the detailed cleaning steps, refer to the section "Clean the motor protection filter" in your complete manual. Regular maintenance of the filter will ensure maximum lifespan of your vacuum cleaner.

Q: How do I rewind the vacuum cleaner's power cord after use?

The Bosch GL30 features an automatic cord rewind system. Here’s how to use it after cleaning: Start by unplugging the plug from the electrical outlet Grab the power cord by the plug Pull briefly on the cord to fully extend it Release it - the cord will automatically rewind into storage Safety tip: When rewinding, ensure that the plug does not hit objects or people. Also, avoid pulling the cord near sharp edges that could damage it.

Question 1

How to clean and maintain the motor protection filter?

Accepted Answer

Regular cleaning of the motor protection filter

The motor protection filter is a crucial component of your BOSCH Serie 4 ProPower BGL41POW2H vacuum cleaner. The manual states that you should clean it regularly to maintain the optimal performance of the device.

According to the manual:

Never operate the device without the motor protection filter in place
If the suction power decreases, one possible cause is that the motor protection filter is clogged
The cleaning procedure is illustrated in Figures 27-29 of the manual

To access the detailed cleaning steps, refer to the section "Clean the motor protection filter" in your complete manual. Regular maintenance of the filter will ensure maximum lifespan of your vacuum cleaner.

Question 2

What tools are needed to disassemble the Bosch Athlet BCH65ALL?

Accepted Answer

The Bosch Athlet BCH65ALL is designed for easy disassembly without specialized tools. To access the main parts, you only need your hands.

Disassembly of key components:

Dust container: Simply use the release buttons located on the container to detach it from the device.
Rotating brush: Press the release button and remove it sideways, no tools needed.
Filtration unit: It can be removed from the dust container for cleaning and maintenance.

All removable parts of this vacuum cleaner are designed to be handled directly without a screwdriver or other tools. Make sure the device is turned off before performing any disassembly or cleaning operations.

Question 3

How to clean the filters of the BOSCH GL30 vacuum cleaner?

Accepted Answer

The BOSCH GL30 has two types of filters that require regular maintenance to maintain the efficiency of the device.

Motor Protection Filter

The motor filter is washable. To maintain it:

Tap it regularly or rinse it with lukewarm water
For significant dirt buildup, rinse the filter and then let it dry for at least 24 hours before reinstalling it

Hygienic Micro-filter

This filter can be washed. It is recommended to replace it with each new batch of replacement bags. After washing, let it dry for at least 24 hours before reinstalling.

HEPA Filter (optional)

If your vacuum cleaner is equipped with the hygienic HEPA filter, note that it is not washable and must be replaced every year.

If you need replacement parts, you can order them from authorized Bosch dealers or directly on Bosch-home.com.

Question 4

How do I rewind the vacuum cleaner's power cord after use?

Accepted Answer

The Bosch GL30 features an automatic cord rewind system. Here’s how to use it after cleaning:

Start by unplugging the plug from the electrical outlet
Grab the power cord by the plug
Pull briefly on the cord to fully extend it
Release it - the cord will automatically rewind into storage

Safety tip: When rewinding, ensure that the plug does not hit objects or people. Also, avoid pulling the cord near sharp edges that could damage it.

Question 5

How to clean or change the filter?

Accepted Answer

The HEPA filter of your Bosch Serie 8 BGL8WH3 vacuum cleaner must be cleaned regularly to maintain good cleaning performance.

Cleaning the filter

Remove the filter from the vacuum cleaner
Rinse it with lukewarm water
Let it dry completely before putting it back in place

Maintenance frequency

It is recommended to clean the filter every 6 months, or more frequently if you have pets or suffer from allergies.

Question 6

How to replace the motor filter of the BOSCH Serie 6 BCS61PET?

Accepted Answer

The BOSCH Serie 6 BCS61PET is equipped with a HEPA filter of the type lamella filter. According to the manual, this filter should be cleaned regularly to maintain optimal suction power, but there is no defined replacement interval.

Filter maintenance:

Tap the lamella filter over a trash can to remove dust
Rinse it with lukewarm water
Let it dry completely before putting it back in place

Filter replacement: The manual does not specify a replacement interval. If, despite regular cleaning, the suction power decreases, or if the filter appears damaged, you will need to replace it. Spare parts are available from Bosch customer service for at least 7 years. Contact Bosch service to order a new motor filter suitable for your model.

Question 7

Why is my BOSCH BGS5Z001 vacuum cleaner not suctioning or suctioning weakly?

Accepted Answer

If your BOSCH BGS5Z001 ZOO'O PROANIMAL vacuum cleaner is not suctioning well, check these points in order, as in 90% of cases, the problem comes from the pleated filter:

Step 1: Check and empty the dust container
Empty the container after each use, or at the latest when the dust reaches the level indicator. A full container drastically reduces suction power. A 3-liter dust container only filters properly if it is not saturated.

Step 2: Clean the pleated filter (priority)
This is the most common cause of loss of suction. Your model has a Sensor Control function that alerts you with a red light when cleaning is necessary. Turn off the device and turn the filter cleaning knob at least 3 times with a quick motion to activate automatic cleaning. We recommend cleaning the pleated filter before each emptying of the container. If the filter is very dirty, you can also rinse it under running water and let it dry completely before reinserting it. Caution: do not brush the filter.

Step 3: Clean the lint filter
If the Sensor Control light comes on quickly after cleaning the pleated filter, the lint filter is probably clogged. Remove the filter unit from the dust collector, then gently shake the filter or use the provided cleaning brush. If necessary, rinse it under clear water and let it dry before reinserting it.

Step 4: Clean the motor protection filter
Open the device cover and remove this filter. Clean it by tapping it on the edge of a container or rinse it under water if very dirty, then let it dry completely before reinserting it.

Step 5: Check that no hose is blocked
Visually inspect the suction hose, tube, and accessories (TURBO-UNIVERSAL brush, nozzle) for any blockages or hair entangled. Remember to lift the brush if it struggles to pick up dirt.

Step 6: Check the power setting
Make sure the power regulator is not in “Low” mode (reserved for delicate fabrics). For floors and carpets, use “Medium” or “High” mode. The power level indicator shows you the active mode.

If the power remains weak after following all these steps, contact BOSCH customer service. For optimal cleaning results, maintain regular hygiene of your device, especially by cleaning the HEPA filter or the air outlet filter after 1 year of use.

Question 8

How to remove the filter from its holder on the Bosch Serie 8 ProAnimal vacuum cleaner?

Accepted Answer

To remove the filters from the Bosch Serie 8 ProAnimal BGS7PET1 vacuum cleaner:

Preparation: Completely stop the vacuum cleaner, unplug it from the electrical outlet, and wait a few minutes for the components to cool down before intervening.

Accessing the filters: Locate the filter compartment located on the top or back of the device (depending on your configuration). Open the cover or access hatch by pressing the fastening clips or unscrewing the fastening elements. The pleated filter and the fluff filter are located in this compartment, mounted on a single filter holder.

Removing the pleated filter: Pull the pleated filter towards you with a steady and firm motion. Generally, it is removed upwards by releasing the fastening points (clips or hook). If the fastening resists, check that all locking mechanisms are released before forcing. Once released, the entire filter holder may come with it.

Removing the fluff filter: The fluff filter (Flusensieb) is generally located next to or behind the pleated filter. Remove it by gently pulling it in the indicated direction, or by unscrewing it if it is equipped with a screwing system. This filter captures fibers and pet hair, which is important for ProAnimal performance.

Cleaning the filters: Before reassembling them, gently tap the pleated filter over a trash can to remove accumulated dust. You can also use the

Question 9

How to properly reinsert the dust bag holder?

Accepted Answer

To properly reinsert the dust bag into the holder of your BOSCH Ergomaxx'x BGL72234AU vacuum cleaner, start by turning off the device. Then, operate the cover closing lever of the dust compartment in the direction indicated by the arrow to open the compartment.

If you are changing the bag, first close the used bag by pulling on its closure tab, then remove it from the holder. Next, take the new bag and place it directly into the holder while keeping it in its original folded state, as it comes out of the packaging. Do not unfold the bag in advance.

Firmly push the bag into the holder until you distinctly hear a click or feel a locking sensation. This click confirms that the bag is securely locked in place. It is very important to push the bag all the way in until it clicks to ensure proper operation and prevent it from moving during use.

When closing the cover, be careful not to crumple, fold, or pinch the bag. Ensure that the bag is not pinched in the edges of the compartment. The cover will only close properly if there is a bag correctly in place and fully clicked in — if you encounter resistance, check that the bag is fully pushed in until the clear click is heard. Once the click is heard, the bag is secured and ready for use.

You will notice that your vacuum cleaner has a bag change indicator light that turns on when the bag is full. Even if the bag does not appear to be completely full, it should be changed as soon as this indicator lights up continuously (check with the brush lifted off the floor and the power at maximum), as the nature of the contents may require a change before the bag is visibly full.

To ensure the best performance of your vacuum cleaner, use only original BOSCH bags designed for this model. Inferior or incompatible bags may damage the device and are not covered by the warranty.

Question 10

Is the filter of the Bosch BGN2B112 / BGN2A213 - GL20 vacuum cleaner washable or does it need to be replaced?

Accepted Answer

For Bosch vacuum cleaners models BGN2B112 and BGN2A213 - GL20, it is important to know whether the filter is washable or not in order to ensure proper maintenance and optimal performance.

Main Filter

The main filter of these models is generally washable. You can clean it with warm water without using detergents, then let it dry completely in the open air before putting it back in place. This helps to prolong its lifespan and maintain good suction.

Exhaust Filter (HEPA or anti-allergen filter)

The exhaust filter, which traps fine particles and allergens, is generally not washable. This filter should be replaced regularly according to the frequency of use and the manufacturer's recommendations, often every 6 to 12 months. A saturated exhaust filter can reduce the vacuum cleaner's efficiency and worsen air quality.

Maintenance Tips

Regularly check the condition of the filters.
Clean the main filter every 1 to 3 months depending on usage.
Replace the exhaust filter according to the manufacturer's instructions.
Do not use washable filters if the manufacturer indicates that they should be replaced.

By following these recommendations, you ensure optimal suction and a better lifespan for your Bosch vacuum cleaner.

User manual BOSCH Vacuum Cleaner : user manuals and guides in PDF

Models BOSCH Vacuum Cleaner most viewed

Other categories BOSCH

Recent questions about Vacuum Cleaner BOSCH