User manual BOSCH Brush cutter : 17 free PDF user manuals

Q: How does the automatic line feed work on the Bosch ART 30 COMBITRIM?

Feed system: The Bosch ART 30 COMBITRIM is equipped with a pro-automatic (tap & go) system that releases the line with each impact. Usage mode: While the device is running, press the trimmer against the ground or a hard surface A pressure of about 3 kg is enough to trigger the mechanism Each strike releases about 4 cm of new line In case of completely broken line: Press twice in a row against the ground to obtain the maximum cutting length. Excess line: If it exceeds the maximum cutting diameter (30 cm), use the knife integrated into the protective cover to cut the excess.

Q: How to remove the cutting head with the line from the BOSCH AFS 23-37 brush cutter?

The BOSCH AFS 23-37 brush cutter has two interchangeable cutting heads: a line spool and a blade. Here’s how to remove the head with the line to install the blade: Removing the head with the line 1. Stop and unplug the device - Make sure the brush cutter is turned off and unplugged before any intervention. 2. Place the device stable - Set it on a flat and stable surface for safe work. 3. Unscrew the nut - Use the provided wrench to unscrew the nut that holds the line spool on the shaft. 4. Remove the spool - Once the nut is removed, gently pull the cutting head with the line to detach it from the shaft. Installing the blade Once the head with the line is removed, you can install the blade: 1. Position the blade - Place the blade on the shaft, then add the ring and the washer. 2. Tighten the nut - Tighten the blade nut with a torque of 20 Nm . 3. Lock the shaft - Use the provided locking rod to lock the shaft and prevent rotation. 4. Wear gloves - Remember to wear protective gloves during this handling. The two heads (line and blade) are perfectly interchangeable, you can change them as often as necessary according to your cutting needs.

Q: How to change the cutting head of the BOSCH AFS 23-37 brush cutter?

To change the cutting head of your BOSCH AFS 23-37 brush cutter, follow these simple steps: 1. Preparation Ensure that the brush cutter is turned off and unplugged to avoid any risk of accident. Place the device on a stable surface. 2. Removing the worn cutting head Use an appropriate wrench (often a flat wrench or an adjustable wrench) to unscrew the nut that holds the cutting head. Once the nut is removed, gently pull the worn cutting head to detach it from the thread. 3. Installing the new cutting head Position the new cutting head on the thread. Screw the fastening nut tightly using the wrench, ensuring it is securely tightened for safety during use. By following these steps, you will be able to effectively replace the cutting head of your BOSCH AFS 23-37 brush cutter and continue your gardening tasks safely.

Q: How to change the spool of the BOSCH ART 23 COMBITRIM trimmer?

To change the wire spool (cartridge) of your BOSCH ART 23 COMBITRIM trimmer, first turn off the device and unplug it from the power outlet for your safety. Removing the old spool: Firmly hold the spool plate 23 in position. Turn the spool cover 21 counterclockwise and remove it. Extract the empty spool 25 from the cover. Installing the new spool: Thread the wire of the new (or filled) spool through hole 22 and place it in the spool cover 21. Pull about 9 cm of wire out of the spool to allow for proper advancement. Position the spool correctly with its cover on the spool plate (bayonet closure), press lightly and turn the cover fully to the right until it clicks into place. For extra-strong cutting wire: if you are using a spool with extra-strong wire, the assembly is identical. Hold the spool plate 23, remove the cover 21, insert the spool with extra-strong wire 14 in the correct position and tighten by turning clockwise until it clicks. Important point: exclusively use original Bosch cutting wires. These specially designed wires offer optimal cutting and advancement characteristics. Other cutting wires have lower working power and may damage your device.

Q: Should the cutting head of the BOSCH AFS 23-37 brush cutter be oiled during cleaning?

For the BOSCH AFS 23-37 brush cutter, it is not necessary to oil the cutting head. However, regular maintenance is important to ensure its proper functioning and prolong its lifespan. Maintenance of the cutting head: Cleaning: After each use, carefully remove debris, cut grass, and other residues accumulated around the cutting head. This prevents blockages and premature wear. Inspection: Regularly check the condition of the wires or blades depending on the type of cutting head. Replace them if necessary. Lubrication: The cutting head of this model does not require oil. Avoid applying lubricants, as this could attract dirt and harm the mechanism. In summary, focus on regular cleaning and careful inspection, without oiling the cutting head.

Q: How to replace the line of the BOSCH AFS 23-37 trimmer?

To replace the line of your BOSCH AFS 23-37 trimmer, follow these simple steps: Steps to replace the line: Preparation: Make sure the trimmer is turned off and unplugged, or that the battery is removed to avoid any accidental start. Access the line holder: Press the release buttons located on the cover of the line holder and remove it to access the worn line. Remove the old line: Gently pull the old line out of the line holder. If the line is stuck, you can cut it with scissors to facilitate its removal. Prepare the new line: Cut a new trimmer line to the recommended length, usually between 2 and 4 meters, according to the manufacturer's specifications. Insert the new line: Insert the new line into the holes of the line holder, making sure to pass it through the designated notches. Ensure that the line is taut and correctly positioned. Reassemble the line holder: Replace the line holder on the trimmer until it clicks securely into place. Test the operation: Plug in or reinsert the battery, then turn on the trimmer to check that the line is correctly installed and functioning normally. By following these steps, you will be able to effectively replace the line of your BOSCH AFS 23-37 trimmer and ensure optimal operation of your device.

Models BOSCH Brush cutter most viewed

User manual BOSCH Brush cutter : user manuals and guides in PDF

Models BOSCH Brush cutter most viewed

Other categories BOSCH

Recent questions about Brush cutter BOSCH