User manual BOSCH Jigsaw : 41 free PDF user manuals

Q: Does the BOSCH PST 700 E have an SDS system? How does the blade attachment work?

The BOSCH PST 700 E does not have an SDS system. The SDS (Slotted Drive System) is used on hammer drills, not on jigsaws. This model uses a quick-release attachment system (push-release) : Blade installation: Push the blade holder (13) up, insert the blade (8) completely with the teeth facing forward, then release. Removal: Press the blade holder up again and remove the blade. The PST 700 E accepts blades with a simple T-stem (1/4") or universal U-stem . A roller guide (7) ensures the stability of the blade during cutting.

Q: How to replace the saw blade of the BOSCH PST18LI?

Preparation: Wear protective gloves to avoid cuts Wait for the blade to come to a complete stop Removal and installation: Push the blade holder (17) upwards Remove the used blade Insert the new blade by pushing it to the back, with the teeth facing the cutting direction Check that the back of the blade clicks properly into the groove of the blade guide (12) Check the locking by pushing the blade holder up once more Compatible blade types: The PST18LI uses the T-Schaft system (T-shank) or universal 1/4" blades (U-shank), tool-free thanks to the quick fastening system.

Q: Is it possible to make bevel cuts with the BOSCH PST9500PEL jigsaw?

Yes, the BOSCH PST9500PEL jigsaw can make bevel cuts (angled or inclined cuts). The base plate can be adjusted up to 45° to the left and right , with preset notches at 22.5° and 45° to facilitate precise adjustments. Accessories to remove For angled cuts, you must remove the dust cover and the chip guard . These two accessories are not compatible with inclined cuts. Compatible accessories The parallel stop with a device for circular cuts remains compatible with bevel angles, provided that the thickness of the workpiece does not exceed 30 mm. Additional limitation When the base plate is advanced for cutting near the edge, you can only use cuts at 0°. In this configuration, the “Cut Control” tracing control with base, the parallel stop for circular cuts, and the chip guard are not available.

Q: Where is figure A1 located and what does it show about the BOSCH PST 700 PE?

Figure A1 of the BOSCH PST 700 PE manual is located in the section "Assembly/changing the saw blade" and illustrates the correct assembly of the blade. This figure shows three essential elements: The blade holder (part 8) pushed upwards in the direction of the arrow The saw blade (part 10) fully inserted into the blade holder, with the teeth oriented in the direction of the cut The roller blade guide (part 9) where the back of the blade must engage in its groove By following this illustration, you ensure that the blade is correctly positioned and secured before using the jigsaw.

Q: Why do the claws of the SDS chuck remain extended after inserting the blade?

If the claws of the chuck (SDS lever no. 9) remain extended after inserting the blade into your BOSCH PST 650 PE, it indicates that the blade has not been positioned correctly. Here are the points to check: Checks to perform Complete insertion of the blade : Push the blade all the way into the blade holder until you feel slight resistance. The SDS lever should automatically reposition backward and lock the blade. If the claws remain extended, the blade is not pushed in deeply enough. Orientation of the teeth : Ensure that the teeth of the blade are facing forward, in the cutting direction. An inverse orientation will prevent locking. Alignment with the roller blade guide (no. 10) : The rear part of the blade must fit correctly into the groove of the roller blade guide. Misalignment will block the automatic locking. Cleaning the mechanism : Dust or debris in the blade holder may prevent the claws from closing. Lightly clean the blade holder before attempting again. Always unplug the device from the power outlet before any intervention. If after these checks the claws remain stuck extended, the SDS mechanism may require servicing by an authorized Bosch service center.

Q: How to change the saw blade of the BOSCH PST?

To remove the current blade: Disconnect the device from the power outlet Turn the SDS lever forward (towards the contact guard) The blade detaches and is removed automatically To install a new blade: Make sure to wear protective gloves to avoid cutting yourself on the teeth Insert the new blade into the tool holder until it clicks Check that the blade is properly positioned and that the SDS lever has returned to place automatically Ensure that the blade is securely locked before using the device Important: Only use T-shank (single shank) blades with a maximum length of 110 mm. These blades are specifically designed for the BOSCH PST.

Q: How to download the manual for the BOSCH PST 670 L?

The manual for the BOSCH PST 670 L jigsaw is available directly on this page. You can view it in the integrated viewer above. To download the PDF , use the [⬇ Download] button located in the toolbar of the viewer. You can also right-click on the document to save it locally. If you prefer to view the manual online, note that the BOSCH PST 670 L is a 500W jigsaw with a cutting depth of 67mm (wood), 10mm (aluminum), 3mm (steel). Its main features include a built-in Class 2 laser module, an adjustable air blower, and a connection for dust extraction. If you have difficulty accessing the PDF, you can also visit the official Bosch website and search for the PST 670 L model in the support section.

Q: How to change the blade with the SDS system on the BOSCH PST7200E jigsaw?

Before any intervention, unplug the tool from the electrical outlet for your safety. Blade changing procedure: Locate the blade locking lever located on the SDS system of the blade holder Operate this lever to unlock the current blade and remove it Before installing the new blade, carefully clean the shank (the part that inserts into the blade holder). A dirty blade shank cannot be securely and firmly fixed Insert the new blade into the blade holder by properly aligning its shank with the SDS system Release the locking lever to secure the blade in place Check that the blade is properly locked before plugging in the tool and starting your work For more illustrated details, refer to figure 1 on page 68 of the user manual.

Q: How to operate the opening and change the blade on the BOSCH PST 650 PE jigsaw?

To operate the opening and change the blade of your BOSCH PST 650 PE jigsaw, follow the steps below: 1. Locate the blade release mechanism On this model, the blade fixation system is generally located near the blade holder, often in the form of a lever or a button that is easy to identify. 2. Operate the lever or button Press or pull on this lever/button to release the blade. This mechanism allows you to unlock the blade without tools, making it easier to remove. 3. Remove the blade Once the mechanism is unlocked, gently pull on the blade to completely remove it from the blade holder. 4. Insert a new blade Position the new blade in the blade holder, ensuring it is properly aligned. Then release the lever or button to lock the blade in place. Safety tip: Make sure the saw is unplugged or the battery is removed before handling the blade to avoid any accidents.

Q: How to use the side stop on the BOSCH PST 900 PEL jigsaw?

The side stop of the BOSCH PST 900 PEL jigsaw is an essential accessory for making straight and precise cuts by guiding the saw along an edge. Here’s how to use it effectively: Installing the side stop Ensure that the saw is turned off and unplugged for your safety. Locate the mounting points on the base of the saw. Insert the side stop into the designated slots. Tighten the screws to securely fix the stop in place. Adjusting the stop To adjust the width of the cut, slightly loosen the mounting screws. Slide the stop to the desired distance from the blade. Tighten the screws to hold the stop in the chosen position. Using during cutting Position the saw so that the stop is in contact with the edge of the material to be cut. Start the saw and move it slowly while keeping the stop against the edge to ensure a straight and even cut. This method will allow you to achieve precise and clean cuts with your BOSCH PST 900 PEL.

Models BOSCH Jigsaw most viewed

User manual BOSCH Jigsaw : user manuals and guides in PDF

Models BOSCH Jigsaw most viewed

Other categories BOSCH

Recent questions about Jigsaw BOSCH