User manual BOSCH Rangefinder : 35 free PDF user manuals

Q: How to calibrate or correct a measurement deviation on the Bosch PLR 50?

The Bosch PLR 50 does not have a user-accessible calibration function. However, you can check the accuracy of your device by performing a simple measurement test, as indicated in the official manual. Accuracy verification procedure: Choose a fixed and well-known distance, between 3 and 10 meters (for example, the width of a room or a door) This distance should be measured indoors, with a smooth and highly reflective target surface Take 10 successive measurements of this same distance Check that each measurement deviates from the average value by no more than ±3 mm Write down your results to compare the accuracy later If all your measurements fall within this ±3 mm tolerance from the average, your device is functioning correctly. The nominal accuracy of the PLR 50 is ±2 mm . If your results exceed ±3 mm: Before concluding a malfunction, ensure that the target surface is indeed reflective and smooth (no fabric, water, or glass). If the problem persists, clean the receiving lens with a soft, dry cloth, as condensation can affect measurements. If after these checks your measurements remain faulty, this indicates a sensor problem. Contact an authorized Bosch service center to have the device inspected and repaired. Repairs should only be entrusted to authorized Bosch stations.

Q: How do I turn off the Bosch PLR 50 laser distance measurer?

To turn off the Bosch PLR 50 laser distance measurer, you need to press and hold the On/Off switch located on the device. A simple press is not enough: a prolonged press is necessary to completely stop the device. The Bosch PLR 50 distance measurer also has an automatic shut-off feature that activates after about 5 minutes of inactivity. This function saves battery by automatically turning off the device if you are not using it. Additionally, the laser beam automatically turns off after about 20 seconds without a measurement being taken. It is recommended to manually turn off the device after each use by pressing and holding the On/Off switch to maximize the lifespan of your AAA batteries.

Q: What is the purpose of the button with an upward arrow on the Bosch PLR 50 laser rangefinder?

On the Bosch PLR 50 laser rangefinder, the button with an upward arrow is a main control element used to navigate and manage the device's options. It is a versatile button whose role varies depending on the context of use. Navigation in menus and settings: This button allows you to scroll up in the lists of functions or options displayed on the screen. When the device is in menu or settings mode, pressing this button moves up the list of available choices, helping you select the desired option among the various measurements or settings. Increasing values: When configuring certain settings or adjusting parameters, this button increases the displayed numerical values. For example, if you are adjusting a measurement tolerance, a unit, or a threshold, pressing this button raises the value step by step, allowing for precise adjustment without having to navigate through complex menus. Changing measurement mode: In combination with other buttons or used repeatedly, the upward arrow button can allow you to switch between the different available measurement modes: simple distance measurement, area measurement, volume measurement, or indirect measurement (Pythagorean function). This is particularly useful for quickly switching from one type of measurement to another during your work. In summary, the upward arrow button is an essential navigation control that gives you full access to the features of the PLR 50: navigating through menus, adjusting settings, and changing measurement modes according to your needs. It is a key element for fully utilizing the capabilities of the laser rangefinder.

Q: How to use the surface mode button on the Bosch PLR 50 laser distance measurer?

The surface mode button on the Bosch PLR 50 laser distance measurer allows you to measure the area of a room or space by automatically calculating the area from length and width measurements. Identifying the surface mode button On the control panel, this button is usually represented by a square or rectangular symbol. It may be accompanied by an icon depicting a surface or area, sometimes labeled "Area". Using the surface mode Turn on the Bosch PLR 50 distance measurer. Press the surface mode button to activate the area measurement function. First, measure the length of the surface by pointing the distance measurer at a wall or edge and confirming the measurement. Next, measure the width of the surface in the same way. The distance measurer automatically calculates the area by multiplying the two measurements and displays the result on the screen. This function is very convenient for quickly obtaining the area of a room or wall without having to do the calculation manually.

Models BOSCH Rangefinder most viewed

User manual BOSCH Rangefinder : user manuals and guides in PDF

Models BOSCH Rangefinder most viewed

Other categories BOSCH

Recent questions about Rangefinder BOSCH