SBC 636 D - Grass trimmer STIGA - Free user manual and instructions
Find the device manual for free SBC 636 D STIGA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Petrol grass trimmer |
| Brand | Stiga |
| Model | SBC 636 D |
| Engine | 2-stroke, displacement 36 cc |
| Power | 1.5 kW (2.0 hp) |
| Fuel type | Gas-oil mixture (2%) |
| Tank capacity | 0.5 L |
| Cutting type | Nylon line or metal blade |
| Cutting diameter | 45 cm (line) / 30 cm (blade) |
| Rotation speed | Up to 9,000 rpm |
| Weight | 6.5 kg |
| Sound level | 96 dB(A) (guaranteed) |
| Vibrations | 5.5 m/s² (handle) |
| Starting | Manual pull start |
| Handlebar | Rounded, ergonomic |
| Anti-vibration system | Yes |
| Blade brake | No (safety stop) |
| Maintenance | Clean air filter, spark plug, blade balancing |
| Oil change interval | Not applicable (2-stroke) |
| Spare parts | Blade, nylon line, spark plug, air filter available |
| Repairability | Repairability score 7.5/10 (estimated) |
| Warranty | 2 years |
| Included accessories | Harness, ear protection, maintenance tool |
Frequently Asked Questions - SBC 636 D STIGA
Which gas-oil mixture to use?
Use a 2% synthetic oil mixture for 2-stroke engines (1 volume of oil for 50 volumes of unleaded gasoline).
How to start the brushcutter when cold?
Set the choke to 'Closed', pull the starter cord 3-4 times, then open the choke and pull again until it starts.
What types of blades are compatible?
3-tooth steel blade for thick brush, 8-tooth blade for tall grass, and nylon line head for light trimming.
How to adjust the rotation speed?
The speed is controlled by the throttle trigger. Hold it down to increase RPM, release to slow down.
What is the procedure to change the blade?
Disconnect the spark plug, block the blade with a wooden wedge, unscrew the central nut with a wrench (attention left-hand thread). Install the new blade and tighten firmly.
What to do if the machine does not start?
Check the mixture, the spark plug (replace if fouled), the air filter (clean), and make sure the emergency stop is not activated.
What regular maintenance is necessary?
Clean the air filter every 10 hours, check the spark plug every 25 hours, grease the gears every 50 hours, and sharpen the blade if necessary.
How to store the device in winter?
Empty the tank, run the engine until it stops, clean the entire unit, remove the spark plug and pour a spoonful of oil into the cylinder, then reinstall the spark plug and turn the engine by hand.
What safety equipment to wear?
Wear safety glasses, hearing protection, gloves, safety shoes, and cut-resistant pants.
Where to find spare parts?
Spare parts are available at authorized Stiga dealers or online via the official website. Refer to the parts list in the manual.
User questions about SBC 636 D STIGA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grass trimmer in PDF format for free! Find your manual SBC 636 D - STIGA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBC 636 D by STIGA.
