User manual Vevor Refrigerator : 62 free PDF user manuals

Q: How to contact Vevor technical support for my refrigerator BD-600?

To obtain technical assistance for your Vevor BD-600 refrigerator, Vevor offers several resources: Official support site : visit www.vevor.com/support where you will find a contact form, a FAQ, and the after-sales service options specific to your model. Electronic warranty certificate : available directly on the support site, with all the details of your warranty coverage. QR Code : a QR code in your PDF manual allows you to quickly access support resources. Important: for any technical intervention or repair on the BD-600, especially regarding the refrigeration circuit or electrical components, only a qualified technician may intervene. This ensures the safety of your device and compliance with standards.

Q: Why is my BD-600 freezer not cooling properly?

Immediate Checks If your freezer is not cooling, start with these checks: Check the power supply - Make sure the plug is properly connected and that there is power. If the voltage is low (below 98 V) or too high (above 132 V), install a power regulator of at least 1000 W. Check the thermostat - The rotary thermostat of the BD-600 has positions 1 to 7/MAX. Ensure it is not accidentally set to minimum or off. Observe the compressor - Listen for any noise from the compressor (humming, refrigerant flow). The surface temperature of the compressor can reach 70-80 °C during normal operation. Common Causes and Solutions Thick frost - If a layer of frost over 5 mm has formed, it blocks the circulation of cold air. Defrost by cutting off the power, removing the food, and allowing it to melt naturally. Use the drainage conduit at the bottom of the unit. Dirty condenser - Clean the back surface (condenser) with a soft cloth. Dust prevents proper heat dissipation. Faulty door seal - Check that the door closes properly and tightly. If the seal is damaged, cold air escapes. Poor ventilation spaces - The BD-600 requires at least 10 cm of free space between the front and back walls for ventilation. Ensure nothing obstructs these spaces. Too frequent openings - Limiting door openings slows down temperature drop. If nothing improves If the compressor is running but the cooling does not return after these checks, there may be an internal problem (refrigeration circuit, compressor). Repairs to sealed components must be carried out by a qualified technician. Do not attempt to puncture or repair the refrigerant tubes yourself (risk of fire/explosion with flammable refrigerant R290/R600a).

Q: Are the temperature fluctuations of the Vevor NL9 normal: why does the temperature rise and fall between -10°C and -4°C?

Yes, this is perfectly normal. The Vevor NL9 operates with a cooling cycle that naturally causes temperature fluctuations. Once you set the thermostat to -10°C (by pressing ▼ to decrease), the compressor activates and cools the inside of the appliance. The temperature drops until it reaches your setting, but it may continue to drop slightly (down to -4°C in your case) before the thermostat automatically turns off the compressor. This is the normal operation of any refrigerator/freezer: the compressor does not stay on continuously; it turns on and off to maintain thermal balance. What you are observing — the temperature dropping to -4°C and then rising back to -10°C — is exactly the intended regulation cycle. The important thing is that the average temperature remains close to what you have set , not that it stays fixed to the nearest tenth of a degree. If after 30-40 minutes the oscillation remains excessive (very wide variations), check that: The ventilation openings at the back of the appliance are not blocked The appliance is not exposed to direct sunlight or a heat source You have not recently inserted very hot foods

Q: What are the internal dimensions of the Vevor NL40 refrigerator?

The technical manual for the Vevor NL40 does not specify the exact internal dimensions. Only the external dimensions are documented: 70 x 40 x 45 cm . With a capacity of 40 liters , the usable internal space is naturally reduced by the thickness of the thermal insulation and the compressor. For typical uses (transporting groceries, picnics, camper vans), this 40L capacity is roughly equivalent to a small portable refrigerator or a compact electric cooler. If you need the precise internal dimensions (usable depth, usable height, usable width), we recommend contacting Vevor support directly with your model number NL40.

Q: How to set the temperature of the refrigerator compartment of the Vevor NLD45?

Automatic adjustment linked to the freezer The refrigerator compartment of the Vevor NLD45 adjusts automatically based on the setting of the freezer compartment (on the left). You cannot adjust it directly. How to set the temperature Press the + or - buttons while in operation until the screen blinks Continue pressing + or - to adjust the freezer compartment (range: -20°C to 20°C) The refrigerator temperature will automatically adjust and always remains above 0°C Temperature correspondences According to the manual, here are the typical correspondences at 25°C ambient: Freezer at 5°C = Refrigerator at 15°C Freezer at -8°C = Refrigerator at 10°C Freezer at -18°C = Refrigerator at 5°C Freezer at -20°C = Refrigerator at 4°C Stabilization at the set temperature takes time according to the manufacturer's manual.

Q: What does error code F6 mean on the Vevor C15 refrigerator?

The error code F6 on your Vevor C15 refrigerator means: "No parameters can be detected by the controller" . This is an electronic error in the device's control system. What to do: Completely unplug the refrigerator from its power supply (12V/24V DC or 100-240V AC depending on your setup) Wait at least 5 minutes Plug it back in and restart the device Check if the F6 code reappears on the LED panel If the code persists after this restart : this indicates a malfunction of the electronic controller. Contact Vevor's customer service for technical assistance, as only a technician can diagnose and repair this type of internal fault. Note: You can check the LED panel or the CAR FRIDGE FREEZER mobile app of your refrigerator to monitor the status in real-time.

Q: The temperature adjustment on the right side of my Vevor J53 cooler is not working

Checks to Perform If the + and - buttons on the control panel are unresponsive or the temperature does not change, here are the steps to follow: Power Supply: Ensure that the cooler is properly connected to a 12V/24V outlet (vehicle cigarette lighter) or to the supplied 100-240V AC power adapter. LCD Screen: The panel screen should display the current temperature. If it is blank or black, there is a power issue. +/- Buttons: The buttons located on the front panel allow you to adjust the temperature by 1°C increments. Press firmly to check if they respond. Temperature Ranges: The cooler can cool down to -20°C and heat up to +55°C . Ensure that your desired setting is within this range. Low Battery: If the power supply voltage is low (especially on vehicle battery), the device may freeze or stop responding to commands. Automatic shutdown occurs when the battery is insufficient. Ventilation: Make sure that the ventilation grilles are not blocked. A lack of air circulation hampers thermal regulation. If after these checks the buttons still do not respond, this may indicate a fault with the control panel itself. Contact Vevor support with your serial number.

Q: How to connect a backup battery to the Vevor X50K refrigerator?

The Vevor X50K supports an optional backup battery that allows you to maintain the set temperature under all circumstances, even in the event of a power outage. Connecting the battery Your refrigerator operates on 12V/24V DC and has a dedicated DC power socket on the unit. You can directly connect an external battery (12V or 24V depending on your model) via: The DC power socket provided on the refrigerator A cigarette lighter adapter (12V/24V DC) Battery protection The unit features an automatic protection system that shuts off the compressor as soon as the battery voltage becomes too low, thus preventing excessive discharge: For 12V: cutoff between 11.3V (high level) and 9.6V (low level) For 24V: cutoff between 24.6V (high level) and 21.3V (low level) You can adjust the sensitivity of this protection by choosing from the 3 levels (H, M, L) of your model. Important: The backup battery is not included with the refrigerator - it is an optional accessory to be purchased separately.

Q: Can the Vevor X50K refrigerator be controlled via a mobile app or Bluetooth on a smartphone?

No, the Vevor X50K does not have smartphone control functionality. Although the manual mentions a digital display with temperature control and a USB port, no mobile app, active Bluetooth connection, or WiFi is available to operate the refrigerator remotely from your phone. The only available controls are: Physical buttons on the control panel (power, temperature adjustment ▲/▼, mode selection) Digital display with mode indicator Selection between the two operating modes: MAX (fast cooling) and ECO (energy saving) The USB port on the device is designed for other uses (charging a backup battery, for example) and does not allow connectivity with a smartphone for controlling the refrigerator.

Q: What is the purpose of the USB port on the Vevor X50K refrigerator?

The USB port is located on the control panel of your Vevor X50K refrigerator, integrated into the digital display. However, the provided technical manual does not specify its exact function. Generally, on this type of device, the USB port can be used for: Firmware updates for the display or control system Technical diagnostics or maintenance To know the specific use and capabilities of the USB port on your X50K model, we recommend contacting Vevor support directly with your model number.

Models Vevor Refrigerator most viewed

User manual Vevor Refrigerator : user manuals and guides in PDF

Models Vevor Refrigerator most viewed

Other categories Vevor

Recent questions about Refrigerator Vevor