How to ground the PL-80M machine?

Q: How to ground the PL-80M machine?

Grounding is mandatory to ensure the safety and proper functioning of your Vevor PL-80M machine. Here’s how to proceed: Connecting the ground cable Use the provided ground cable (ground clamp) and connect it directly to your welding piece. Position the clamp as close as possible to the welding area to ensure optimal contact. Make sure the metal is exposed and clean at the connection points - no paint, rust, or dirt that would block electrical contact. Electrical specifications Your machine operates on 110V or 220V, 50/60Hz with a supply of 16A (D curve circuit breaker or aM fuse) . Grounding is an integral part of this electrical safety circuit. Usage conditions Never weld on a very damp or wet ground . This could affect the continuity of the ground and create an electrical safety risk.

Question

Accepted Answer

Grounding is mandatory to ensure the safety and proper functioning of your Vevor PL-80M machine. Here’s how to proceed:

Connecting the ground cable

Use the provided ground cable (ground clamp) and connect it directly to your welding piece.
Position the clamp as close as possible to the welding area to ensure optimal contact.
Make sure the metal is exposed and clean at the connection points - no paint, rust, or dirt that would block electrical contact.

Electrical specifications

Your machine operates on 110V or 220V, 50/60Hz with a supply of 16A (D curve circuit breaker or aM fuse). Grounding is an integral part of this electrical safety circuit.

Usage conditions

Never weld on a very damp or wet ground. This could affect the continuity of the ground and create an electrical safety risk.

User manual Vevor Welding machine : user manuals and guides in PDF

Models Vevor Welding machine most viewed

Other categories Vevor

Recent questions about Welding machine Vevor