How to adjust the focus of the Vevor KH5030 laser engraver?

Question

Accepted Answer

To focus your Vevor KH5030 laser engraver, follow these steps:

Focusing Procedure

Place the acrylic focusing tool - Use the tool provided with the machine and place it on the material you wish to engrave.
Adjust the Z-axis - Press the Z-axis control buttons located on the machine to gradually raise the table upwards.
Position the laser head - The laser head should barely touch the top of the focusing tool without applying pressure. This is the height at which the focal distance is correct.
Close the cover - Once the focus is set, close the protective cover of the machine before starting the engraving.

Tip: This procedure works for all materials. If you change the thickness of the material, simply repeat this focusing process to adjust the machine. Never position the bed without material and do not attempt to climb onto the table during adjustment.

User manual Vevor Laser Engraver : user manuals and guides in PDF

Models Vevor Laser Engraver most viewed

Other categories Vevor

Recent questions about Laser Engraver Vevor