How to assemble the Vevor TX-B6232B trampoline?

Q: How to assemble the Vevor TX-B6232B trampoline?

Steps to assemble the Vevor TX-B6232B trampoline Have two people to properly set up this trampoline. Supplied materials The frame with the jumping mat (already assembled) The frame protective padding 6 stabilization tubes with caps Safety pins Washers Step-by-step assembly Step 1 - Unfolding the frame: Hold the frame firmly on the ground with one hand, then slowly and gradually open it with the other hand until it is fully unfolded. Step 2 - Locking with pins: Once the frame is fully open, insert the safety pins into the designated holes of the trampoline to keep it in place. Step 3 - Installing the padding: Align the holes of the protective padding with the screws of the steel frame and secure them properly. The padding is mandatory for use - it protects against contact with metal parts. Step 4 - Attaching the stabilization tubes: Screw all 6 stabilization tubes onto the nuts of the frame and tighten them securely to prevent any play during use. Final checks All foot caps must be fully screwed in The feet must rest flat on the ground Check that the assembly is complete before first use Install the trampoline on a flat and level surface

Question

Accepted Answer

Steps to assemble the Vevor TX-B6232B trampoline

Have two people to properly set up this trampoline.

Supplied materials

The frame with the jumping mat (already assembled)
The frame protective padding
6 stabilization tubes with caps
Safety pins
Washers

Step-by-step assembly

Step 1 - Unfolding the frame: Hold the frame firmly on the ground with one hand, then slowly and gradually open it with the other hand until it is fully unfolded.

Step 2 - Locking with pins: Once the frame is fully open, insert the safety pins into the designated holes of the trampoline to keep it in place.

Step 3 - Installing the padding: Align the holes of the protective padding with the screws of the steel frame and secure them properly. The padding is mandatory for use - it protects against contact with metal parts.

Step 4 - Attaching the stabilization tubes: Screw all 6 stabilization tubes onto the nuts of the frame and tighten them securely to prevent any play during use.

Final checks

All foot caps must be fully screwed in
The feet must rest flat on the ground
Check that the assembly is complete before first use
Install the trampoline on a flat and level surface

User manual Vevor Trampoline : user manuals and guides in PDF

Models Vevor Trampoline most viewed

Other categories Vevor

Recent questions about Trampoline Vevor