Q: How to start the RYOBI One+ RLM18X33B40 lawn mower?

Before starting: make sure the 18V lithium-ion battery is properly inserted and the safety key is in place. Check that all four wheels are on the ground and that the grass bag is securely attached. Starting Steps Press the Start button While holding the Start button, press the On/Off button Release the Start button (continue holding the On/Off button) The mower starts - continue to hold the On/Off button to operate To stop, simply release the On/Off button Important: you must always stay behind the handlebar while operating. If the mower stops due to an overload (thick grass or jammed blade), let it cool down for a few minutes, then repeat the starting procedure.

Q: The mower won't start after an overload - how to reset it?

If your One+ RLM18X33B40 mower has stopped due to an overload (blade jammed, thick grass, etc.), this is normal - the protection system has activated to protect the motor. Reset Procedure: Completely stop the mower and remove the lithium-ion battery Check that the blade is properly immobilized Let the battery cool down for a few minutes if it is hot (it has its own thermal protection) Reinsert the battery and fully release the on-off button Restart by first pressing the start button, then the on-off button If the machine restarts normally, the protection system has worked correctly. If it does not start after these steps, it may indicate a mechanical problem (blade truly jammed) to be examined before attempting again.

Question 1

How to start the RYOBI One+ RLM18X33B40 lawn mower?

Accepted Answer

Before starting: make sure the 18V lithium-ion battery is properly inserted and the safety key is in place. Check that all four wheels are on the ground and that the grass bag is securely attached.

Starting Steps

Press the Start button
While holding the Start button, press the On/Off button
Release the Start button (continue holding the On/Off button)
The mower starts - continue to hold the On/Off button to operate
To stop, simply release the On/Off button

Important: you must always stay behind the handlebar while operating. If the mower stops due to an overload (thick grass or jammed blade), let it cool down for a few minutes, then repeat the starting procedure.

Question 2

The mower does not start

Accepted Answer

If your RYOBI Max Power RLM36X41H50 mower does not start, check the following points in order:

Deploy and lock the telescopic handle - The handle must be fully extended and locked for the mower to operate.
Check the lithium-ion battery BPL3650D - Ensure it is properly inserted and fully charged. A weak or improperly positioned battery will prevent starting.
Insert the isolation key (13) - This key must be in place for the mower to start. It is only removed for maintenance.
Press the start button, then the On/Off button - First press the start button (button 2), then hold down the On/Off button (button 1) to start the mower.
Check the thermal protection - If the mower stopped after operation, the overload/overheat protection may be activated. Allow it to cool down for a few minutes before restarting.
Inspect the blade - A damaged or blocked blade can prevent starting. Wear thick gloves and check that no debris is blocking it.

If the mower still does not start after checking these points, consult the authorized RYOBI service center.

Question 3

How to start the RYOBI Max Power RY36LMXSP53A lawn mower?

Accepted Answer

Here are the steps to properly start your RYOBI Max Power RY36LMXSP53A lawn mower:

Insert a charged 36V lithium-ion battery into the battery port
Turn the isolation key towards the battery (the key should point towards the accumulator)
Press simultaneously the start button AND the on/off trigger
Release the start button once the motor is running
Continue to press the trigger to keep the blades operating

Important points:

You are in the safety zone behind the handles - stay there when starting
Hands and feet must stay away from the blade openings
The mower has two RYOBI ONE+ battery ports - it automatically switches to the second battery when the first one runs out
Ensure that all children and pets remain at least 15 meters away

Question 4

What is the grass discharge and collection system of the RYOBI Max Power RY36LMXSP46A lawn mower?

Accepted Answer

Grass discharge and collection system

The RYOBI Max Power RY36LMXSP46A lawn mower features two distinct collection systems that allow you to choose the method of handling the cut grass according to your gardening needs and preferences.

Collection mode with grass collection bag

The 60-liter grass collection bag collects the mowing residues and prevents them from being discharged onto the lawn. This bag attaches to the rear discharge opening of the mower. A full bag indicator alerts you when the bag reaches its capacity and needs to be emptied. To remove the bag, simply use the quick-release fastener to detach it from the mower. Regularly check that the bag is not blocked and clean it if necessary by completely emptying it.

Mulching mode with mulching accessory

The mulching accessory, provided with the mower, completely covers the rear discharge opening. This system allows the blade to cut and finely recut the grass several times, creating an organic mulch that naturally reintegrates into the lawn. This mode is ideal for nourishing your grass and reducing mowing waste.

Essential safety and maintenance points

The mower will not start if the grass collection bag or the mulching accessory is not installed. A capture/mulching indicator on the control panel alerts you if either is missing.
The discharge opening must always be protected by the grass bag and its discharge chute cover. Never operate the mower with the discharge exposed.
Never start the mower while facing the grass discharge opening.
Before clearing a blockage or unclogging the discharge chute, stop the mower, remove the isolation key and battery block, and ensure that all moving parts have completely stopped.
Always wear thick protective gloves when cleaning the bag or discharge system, as the blades remain sharp and can move even after the machine has stopped, and the cut grass can be sharp.
Regularly check that the grass collection bag is not damaged or worn, and thoroughly clean any obstructions from the discharge chute to ensure optimal operation.

Question 5

Is there a side discharge on the RLM36X46H50PG mower?

Accepted Answer

No, the RYOBI Max Power RLM36X46H50PG mower does not have a side discharge. This battery mower is equipped with a rear discharge only, with two interchangeable discharge systems according to your preferences.

System 1: Grass collection bag - The grass collection bin (50 L capacity) attaches to the back of the mower and collects the mowing residues. This system helps keep your lawn clean and allows for easy disposal of waste for composting. The bin must be properly installed for the mower to function normally.

System 2: Mulching - The mulching accessory provided attaches to the rear discharge opening and replaces the bin. This system cuts and finely chops the mowing residues, which fall directly onto the lawn. Mulching enriches the soil naturally and reduces maintenance, but requires less dense and shorter grass to work effectively.

These two systems are the only available discharge options on this model. You can switch from one system to another according to your seasonal needs or mowing preferences. Important: do not attempt to mow without one of these two systems in place, as this could damage the device.

Question 6

The mower won't start after an overload - how to reset it?

Accepted Answer

If your One+ RLM18X33B40 mower has stopped due to an overload (blade jammed, thick grass, etc.), this is normal - the protection system has activated to protect the motor.

Reset Procedure:

Completely stop the mower and remove the lithium-ion battery
Check that the blade is properly immobilized
Let the battery cool down for a few minutes if it is hot (it has its own thermal protection)
Reinsert the battery and fully release the on-off button
Restart by first pressing the start button, then the on-off button

If the machine restarts normally, the protection system has worked correctly. If it does not start after these steps, it may indicate a mechanical problem (blade truly jammed) to be examined before attempting again.

Question 7

What to do if the RYOBI RLM3313 electric mower does not start?

Accepted Answer

Here are the key points to check according to your RYOBI RLM3313 manual:

Essential checks:

Power supply and cord - Make sure the mower is plugged into a working outlet. Test the outlet with another electrical device. Inspect the power cord for any visible cuts or damage.
Operating conditions - The manual states not to use the mower in wet conditions or rain. Wet grass can also block the start. Wait for the ground to dry.
Wheel position - All four wheels must remain in contact with the ground. Check that no wheel is elevated or blocked.
Blocked blades - Completely disconnect the mower, then manually check that the blades turn freely (no leaves, dried grass, or debris stuck).

Correct starting procedure:

According to the manual: first press the Start button, then the On/Off (A or B) button to start. Hold the On/Off button down during operation.

If the mower still does not start:

A technical repair is necessary. Contact an authorized RYOBI service recommended, especially if you suspect an electrical issue with the 1300W motor or the starting system.

Question 8

How to unlock the mechanism of the RYOBI Max Power RY36LMXSP46A electric mower?

Accepted Answer

To unlock and deploy the telescopic handle of the RYOBI Max Power RY36LMXSP46A electric mower, start by locating the handle locking lever (item 8) and the quick-release latch (item 12) located on the sides of the handle. These two mechanisms keep the handle in its compact storage position.

To unlock the mechanism, proceed as follows:

Release the quick-release latch: Press or pull the quick-release latch depending on its type (clip or button) to free it from its locked position. This latch keeps the handle closed during vertical storage.
Operate the locking lever: Press or lift the locking lever to release the locking mechanism. This lever prevents the handle from accidentally deploying during transport or storage.
Deploy the handle: Once both mechanisms are unlocked, pull the handle towards you to extend it. The telescopic handle must be fully deployed to position 1 or 2 (depending on your comfort) before using the mower.
Secure the operating position: After deploying the handle to the desired position, tighten the locking lever and the quick-release latch to lock the handle in the operating position. This step is essential to ensure stability and safety during mowing.

Important: Always check that the handle is properly locked before starting to mow. In vertical storage, ensure that the handle is fully locked by completely closing the locking lever and the quick-release latch to prevent it from accidentally deploying.

If the lever or quick-release latch gets stuck, gently clean the area around the mechanisms to remove any dirt or dried grass that may obstruct operation.

Question 9

How to use the RYOBI Max Power RY36LMXSP46A mower without the mulching function and remove the mulching accessory?

Accepted Answer

To use your RYOBI Max Power RY36LMXSP46A electric mower without the mulching function, you need to remove the mulch plug that covers the rear discharge opening. This plug must be replaced with the 60-liter grass collection bag, as the product will not start if either accessory is not installed.

Before you begin: Completely stop the mower, remove the 36V battery, and wait for all moving parts to come to a stop. This is a mandatory safety step before any intervention on the device.

Steps to remove the mulch plug:

Locate the rear discharge opening of the mower, at the back of the cutting deck
Identify the mulch plug that closes it - this is a removable accessory designed to allow the blade to recycle grass and produce finer clippings
Release the mulch plug by operating the fastening system (usually a lever, button, or clips depending on the model)
Gently pull the accessory towards you to completely detach it
Never apply excessive force to avoid damaging the fastenings or locking mechanism

Installing the grass collection bag: Once the mulch plug is removed, immediately install the 60-liter grass collection bag. Ensure that it clicks into place correctly and locks securely - you should hear or feel a safety click. Without this installation, the capture/mulching indicator will remain on and the mower will not start.

With the collection bag installed, your RYOBI Max Power RY36LMXSP46A mower will collect the cut grass directly without recycling it. You can then reinstall the 36V battery and use the mower normally. The bag fills up gradually and displays an indicator when it is full - empty it regularly during mowing for optimal use on your medium to large lawn.

Question 10

How to adjust the self-propelling speed on the RYOBI RLM46160S lawn mower?

Accepted Answer

The RYOBI RLM46160S self-propelling electric lawn mower allows you to adjust the speed of the automatic drive function to match your mowing pace.

How to set the self-propelling speed:

Locate the lever or adjustment knob: On this model, a lever or regulator is usually located near the handle or on the handlebars.
Adjust the speed: By moving this lever or turning the knob, you can increase or decrease the speed at which the mower moves forward automatically.
Test the setting: Once adjusted, push the mower slightly to check if the speed matches your preference.

This function allows you to work comfortably without having to push the mower manually, adapting the speed to the density of the grass or your ease of use.

User manual RYOBI Electric mower : user manuals and guides in PDF

Models RYOBI Electric mower most viewed

Other categories RYOBI

Recent questions about Electric mower RYOBI