BRS 43500 C - Steam cleaner Kärcher - Free user manual and instructions
Find the device manual for free BRS 43500 C Kärcher in PDF.
| Brand | Kärcher |
| Model | BRS 43500 C |
| Product type | Carpet steam cleaner |
| Power supply | 230 V / 50 Hz, 1~ |
| Average power consumption | 370 W |
| Working width | 400 mm |
| Brush diameter | 90 mm |
| Brush speed | 470 t/min |
| Cleaning pump pressure | 0,34 MPa |
| Detergent pump flow rate | 0,38 l/min |
| Detergent tank capacity | 7,5 L |
| Theoretical cleaning area | 300 m²/h |
| Dimensions (L × W × H) | 400 × 470 × 1160 mm |
| Transport weight | 25 kg |
| Max permissible weight | 33 kg |
| Sound pressure level | 68 dB(A) |
| Sound power level | 79 dB(A) |
| Hand-arm vibration | < 2,5 m/s² |
| Intended use | Indoor carpet cleaning, professional use |
| Recommended maintenance | Clean brushes, filter and dust tray after each use; rinse tank |
| Safety | Overload fuse, emergency stop via main switch |
| Warranty | As per distributor terms, parts and labor subject to conditions |
| Included accessories | Spray nozzle, bottle holder, cable clip |
Frequently Asked Questions - BRS 43500 C Kärcher
User questions about BRS 43500 C Kärcher
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Steam cleaner in PDF format for free! Find your manual BRS 43500 C - Kärcher and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BRS 43500 C by Kärcher.
USER MANUAL BRS 43500 C Kärcher
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/05/01
Warranty
Please read and comply with these original instructions prior
to the initial operation of your appliance and store them for later use or subsequent owners.
Contents
Safety instructions EN.1
Function EN.1
Proper use EN...1
Environmental protection . EN . . .2
Control elements EN.2
During first start-up EN.3
Before startup EN.3
Operation EN.3
Transport EN.4
Storage EN.4
Care and maintenance EN.4
Troubleshooting EN.6
Technical specifications EN.7
EU Declaration of Conformity EN.8
Warranty EN.8
Accessories and spare parts EN.8
Safety instructions
Before using the appliance for the first time, read and observe these operating instructions and the accompanying brochure: Safety information for brush cleaning units, 5.956-251.0.
Symbols in the operating instructions
DANGER
Immediate danger that can cause severe injury or even death.
WARNING
Possible hazardous situation that could lead to severe injury or even death.
CAUTION
Possible hazardous situation that could lead to mild injury to persons or damage to property.
Function
The carpet detergent is applied with the spray system. Two opposite brush rollers work the detergent into the carpet. The carpet will dry within a relatively short time and can be walked on. After the drying process, the dirt picked up by the carpet detergent is vacuumed off with a brush vacuum cleaner. A working width of 430 mm and a capacity of 7.5 l of the detergent tank allow an effective cleaning.
The power supply operation allows a high capacity without a restriction of the working time.
Note
The appliance can be equipped with various accessories depending on the cleaning task. Please request our catalogue or visit us on the Internet at www.kaercher.com.
Proper use
Use this appliance only as directed in these operating instructions.
- This carpet cleaning appliance is intended to clean loop carpets, velvet floors and needle fleece inside of buildings.
- The application temperature ranges from +5 °C to +40 °C.
- The appliance may only be equipped with original accessories and spare parts.
- The appliance has been developed for cleaning floors inside rooms and roofed areas.
- This device is exclusively meant for industrial and commercial use.
Environmental protection
| The packaging materials are recyclable. Please do not throw packaging in the domestic waste but pass it on for recycling. | |
| Old units contain valuable recyclable materials. Batteries, oil and similar substances may not be released into the environment. Therefore please dispose of old units through suitable collection systems. |
Notes about the ingredients (REACH)
You will find current information about the ingredients at:
www.kaercher.com/REACH
Control elements
1 Power switch 2 Key detergent solution 3 Push handle 4 Brush drive button 5 Cable clamp 6 Detergent Tank 7 Spray bottle holder 8 Lock of pushing handle 9 Button for brush change 10 Waste container 11 Sieve 12 Detergent solution outlet 13 Brushing rollers 14 Overload fuse for brush drive 15 Detergent tank support 16 Detergent tank lid 17 Detergent hose coupling 18 Nozzle, made available in delivery condition 19 Nozzle holder
During first start-up
Figure 1, see cover page
Remove the appliance and the push handle from the packaging and assemble as shown in the illustration.
Figure 2, see cover page
Connect a cable between the appliance and the push handle. Slide the connector into the push handle.
Figure 3, see cover page
When inserting the push handle into the appliance, adjust the cable through the slot in the push handle so that it is not pinched.
Figure 4, see cover page
Slide the push handle all the way onto the appliance. Thread in the 4 included screws and tighten them. Fill water into the detergent tank. Insert the mains plug into the socket. Set the appliance switch to "I". Press and hold the key for the detergent solution and flush the water system. Set the appliance switch to "0". Disconnect the main plug from the socket.
Before Startup
Installing the Brushes
Place the slider vertically and arrest. Tilt the appliance backward and store it on the pushing handle. Place the brush roller onto the driver and lock into place on the opposite side.
Operation
DANGER
Danger of injury by electric shock. Check the mains cables of the machine each time before using the machine to see that it is not damaged. Never operate a machine with damaged cables. Get the damaged cables replaced by an electrician.
Risk of injury on account of electric shock caused by a damaged mains cable. Do not let the mains cable come in contact with the rotating brushes or pads.
NOTICE
To put the brush drive out of operation immediately, move the appliance switch to "0".
Drive the machine
Place the slider vertically and arrest. Tilt the appliance toward the back and drive it to the place of use on its transport wheels.
Filling in detergents
CAUTION
Risk of damage. Only use the recommended detergents. With respect to different detergents the operator bears the increased risk regarding the operational safety, accident risk and reduced product life of the appliance. Only use detergents that are free from solvents, hydrochloric acid and hydrofluoric acid.
Follow the safety instructions for using detergents.
Do not process any inflammable, explosive, corrosive or poisonous consumables.
NOTICE
Observe the dosing notes.
Recommended detergents:
| Application Detergent | |
| Intermediate carpet cleaning | RM 768 iCapsol |
Dosage 6%:
| Fill quantity water [litres] | Fill quantity of deter- gent – 768 [ml] |
| 1 | 60 |
| 2 120 | |
| 3 180 | |
| 4 240 | |
| 5 300 | |
| 6 360 | |
| 7 420 |
Removing the detergent tank
To fill the detergent tank at a sink, the detergent tank can be removed from the appliance as follows:
Squeeze the detergent hose and pull it off the tank. Unhook both upper ends of the detergent tank support from the appliance. Lift off the detergent tank.
Fill detergent tank
Open the lid of the detergent tank. Fill the detergent tank with water and leave sufficient room for the detergent. Dose the detergent according to the provided product information. Close the lid of the detergent tank. Reattach the detergent tank to the appliance if necessary.
Cleaning
Vacuum loose dirt with a vacuum cleaner prior to cleaning. Remove the nozzle from the nozzle holder and screw it into the detergent solution outlet. Insert the mains plug into the socket. Activate the lock of the slider and turn it to the back with your foot. Set the appliance switch to "l". Press the brush drive button - the brushes will begin to rotate. Press the detergent button - the detergent will be applied as long as the button is pressed. Move the appliance over the surface to be processed by the slider.
CAUTION
Risk of damage to the floor covering. Do not operate the appliance on the spot.
NOTICE
Apply the detergent while in forward motion. After that, work the detergent into the carpet in a criss-cross manner.
Finish operation
Place the slider vertically and arrest. Place the appliance on a containment (preserves the brushes). Carry out maintenance jobs "after work" (see section "Maintenance and Care"). Set the appliance switch to "0". Disconnect the main plug from the socket. Wrap the mains connection cable around the hooks on the slider. Store the appliance in a dry room.
Transport
CAUTION
Risk of injury and damage! Observe the weight of the appliance when you transport it. When transporting in vehicles, secure the appliance according to the guidelines from slipping and tipping over.
Storage
CAUTION
Risk of injury and damage! Note the weight of the appliance in case of storage. This appliance must only be stored in interior rooms.
Care and maintenance
DANGER
Risk of injury!
Pull the plug from the mains before carrying out any tasks on the appliance.
CAUTION
Risk of damage to the appliance on account of water leakage. Remove the detergent tank before doing any work on the appliance.
Maintenance schedule
After the work
CAUTION
Risk of damage. Do not wash down the appliance with water and do not use aggressive detergents.
Check electrical cable and plug for damages. Get defective parts replaced by Customer Service. Empty the detergent tank and rinse with hot water (max. 50°C). Fill a small amount of hot water into the detergent tank. Reattach the detergent tank to the appliance. Flush the nozzle by pressing the detergent button. Remove nozzle, rinse under running water and insert in the nozzle holder on the push handle. Empty detergent tank. Cleaning the sieve. Remove the brushes and rinse with warm water. Clean the brush tunnel. Reinstall the brushes and exchange their positions to preserve them. Detach the coupling in the detergent hose to prevent undesired water leaks on the nozzle. Remove the waste container and clean it. Clean the outside of the appliance with a damp cloth which has been soaked in mild detergent. Check the brushes for wear, replace if required. The brushes are considered worn, if the bristles have the same length as the yellow indicator bristles.
Weekly
Check appliance for damage, have damages repaired by customer service. Check spray pattern of the nozzle. Clean or replace the nozzles as needed.
Yearly
Have the prescribed inspection carried out by the customer service.
Maintenance Works
Replacing the brush rollers
Place the slider vertically and arrest. Tilt the appliance backward and store it on the pushing handle. Press the brush change key toward the outside and simultaneously tilt the brush roller out. Pull out the brush roller. Place the new brush roller on the driver and lock into place.
Maintenance contract
To ensure reliable operation of the appliance, maintenance contracts can be concluded with the competent Kärcher sales office.
Troubleshooting
△DANGER
Risk of injury!
Pull the plug from the mains before carrying out any tasks on the appliance.
CAUTION
Risk of damage to the appliance on account of water leakage. Remove the detergent tank before doing any work on the appliance.
In case of faults that cannot be remedied using the table below, please contact the customer service.
Faults
| Fault Remedy | |
| Appliance cannot be started Check | Check if the mains plug is connected. |
| Reset the overload fuse by pressing it in. | |
| Check the brushes for blockage due to foreign particles, remove them if found. | |
| Too little or no detergent appli-cation | Clean sieve. |
| Remove the nozzle, rinse under running water and rein-sert it. Replace the nozzle. | |
| Check the correct positioning of the coupling in the deter-gent hose. | |
| Insufficient cleaning result Check | the brushes for wear, replace if required. |
| Check the detergent dosing. | |
| Appliance vibrates. Check if brusshes are fitted properly. | |
Technical specifications
| Power | ||
| Nominal voltage V/Hz 230 / 1~50 | ||
| Average power consumption W 370 | ||
| Maximum allowed net impedance Ohm (0.326+j0.204) | ||
| Cleaning brushes | ||
| Working width mm 400 | ||
| Brush diameter mm 90 | ||
| Brush speed 1/min 470 | ||
| Detergent pump pressure MPa 0,34 | ||
| Detergent pump flow rate l/min 0,38 | ||
| Dimensions and weights | ||
| Theoretical surface cleaning performance m2/h 300 | ||
| Volume detergent tank I 7,5 | ||
| Length | mm 400 | |
| Width | mm 470 | |
| Height | mm 1160 | |
| Transport weight | kg | 25 |
| Permissible overall weight | kg | 33 |
| Values determined as per EN 60335-2-72 | ||
| Hand-arm vibration value | m/s2 | <2,5 |
| Uncertainty K | m/s2 | 1 |
| Sound pressure level LpA | dB(A) | 68 |
| Uncertainty KpA | dB(A) | 3 |
| Sound power level LWA | dB(A) | 79 |
| Uncertainty KWA | dB(A) | 6 |
EU Declaration of Conformity
We hereby declare that the machine described below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval.
Product: Spray extraction device
Type: 1.006-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2014/30/EU
Applied harmonized standards
EN 55014-1: 2006+A1: 2009+A2: 2011
EN 55014-2: 2015
EN 60335-1
EN 60335-2-72
EN 61000-3-2: 2014
EN 61000-3-3:2013
EN 62233: 2008
Applied national standards
The signatories act on behalf of and with the authority of the company management.
H.Jenner
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
The warranty terms published by the relevant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in manufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Service centre. Please submit the proof of purchase.
Accessories and Spare Parts
- Only use accessories and spare parts which have been approved by the manufacturer. The exclusive use of original accessories and original spare parts ensures that the appliance can be operated safely and trouble free.
- At the end of the operating instructions you will find a selected list of spare parts that are often required.
- For additional information about spare parts, please go to the Service section at www.kaercher.com.
www.kaercher.com/REACH
Figure 3, see cover page
2006/42/EC (+2009/127/EC)
2014/30/EU
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
Responsible for documentation:
S. Reiser
Alfred Kärcher SE & Co. KG
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
2006/42/EC (+2009/127/EC)
2014/30/EU
Chairman of the Board of Management
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Controls
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Control elements
2006/42/EC (+2009/127/EC)
2014/30/EU
H.Jenner Chairman of the Board of Management
S. Reiser Director Regulatory Affairs & Certification
Document responsible:
S. Reiser
Alfred Kärcher SE & Co. KG
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
Technical data. PT .7
2006/42/EC (+2009/127/EC)
2014/30/EU
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Controls
1 Switch 2 Detergent solution button 3 Handle 4 Brush drive button 5 Cable holder 6 Detergent tank 7 Spray bottle holder 8 Locking mechanism for push handle 9 Brush change button 10 Dirt container 11 Strainer 12 Cleaning solution outlet 13 Brush rollers 14 Overload protection for brush drive 15 Detergent tank holder 16 Detergent tank cover 17 Detergent hose coupling 18 Nozzle, available here in delivery condition 19 Nozzle holder
2006/42/EC (+2009/127/EC)
2014/30/EU
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
In each country, the warranty conditions established by our distributors apply.
www.kaercher.com/REACH
Controls
2006/42/EC (+2009/127/EC)
2014/30/EU
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Adjustment
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
Authorized documentation representative:
S. Reiser
Alfred Kärcher SE & Co. KG
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Controls
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Operating elements
H.Jenner Chairman of the Board of Management
S. Reiser Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Control elements
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Guarantee
www.kaercher.com/REACH
Control elements
1 Appliance switch 2 "Cleaning solution" button 3 Spray gun 4 "Brush drive" button 5 Cable reel 6 Suction hose for cleaning agent 7 Spray lance holder 8 Drive wheel lock 9 Brush replacement button 10 Dirt collection reservoir 11 Filter mesh 12 Cleaning solution outlet 13 Brush shaft 14 Brush drive overload protection 15 Cleaning agent container holder 16 Cleaning agent container lid 17 Cleaning agent hose connection 18 Nozzle, supplied separately 19 Nozzle holder
Before first use
Fig. 1, see reverse side
Product: spray extraction cleaner
Type: 1.006-xxx
2006/42/EC (+2009/127/EC)
2014/30/EU
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
Authorized employee for document management:
S. Reiser
Alfred Kärcher SE & Co. KG
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
In each country, the warranty conditions published by our authorized distributor apply. We will repair possible faults in the appliance free of charge within the warranty period, provided that they are due to material or manufacturing defects. In the event of a claim within the warranty period, please contact your dealer or the nearest authorized customer service with your proof of purchase.
The date of manufacture is displayed on the factory plate in coded form.
In this case, the individual digits have the following meaning:
Example: 30190
3 year of manufacture 0 century of manufacture 1 decade of manufacture 9 second digit of month of manufacture 0 first digit of month of manufacture
Thus, in this example, the code 30190 indicates the date of manufacture 09/(2)013.
Original spare parts
- Only original spare parts approved by the manufacturer may be used. The use of original spare parts guarantees you reliable and uninterrupted operation of the device.
- You will find the most frequently needed spare parts in the operating instructions. Further information on spare parts can be found on the website www.kaercher.com in the Service section.
www.kaercher.com/REACH
Control elements
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Garancia
www.kaercher.com/REACH
Controls
2006/42/EC (+2009/127/EC)
2014/30/EU
A. Jenner Chairman of the Board of Management
S. Reiser Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Controls
Relevant EU directives:
2006/42/EC (+2009/127/EC)
2014/30/EU
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Controls
2006/42/EC (+2009/127/EC)
2014/30/EU
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
Documentation administrator:
S. Reiser
Alfred Kärcher SE & Co. KG
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Operating elements
EU directives complied with:
2006/42/EC (+2009/127/EC)
2014/30/EU
Harmonized standards used:
EN 55014-1: 2006+A1: 2009+A2: 2011
EN 55014-2: 2015
EN 60335-1
EN 60335-2-72
EN 61000-3-2: 2014
EN 61000-3-3:2013
EN 62233: 2008
National application standards:
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
2006/42/EC (+2009/127/EC)
2014/30/EU
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Control elements
1 Device switch 2 Detergent solution button 3 Push handle 4 Brush drive button 5 Cable holder 6 Detergent tank 7 Spray bottle holder 8 Push handle fastener 9 Brush replacement button 10 Dirt collection tank 11 Mesh 12 Detergent solution outlet 13 Roller brushes 14 Brush drive overload protector 15 Detergent tank holder 16 Detergent tank cover 17 Detergent hose coupling 18 Nozzle, here in delivery-ready state 19 Nozzle holder
2006/42/EC (+2009/127/EC)
2014/30/EU
Applied harmonized standards:
EN 55014-1: 2006+A1: 2009+A2: 2011
EN 55014-2: 2015
EN 60335-1
EN 60335-2-72
EN 61000-3-2: 2014
EN 61000-3-3:2013
EN 62233: 2008
Applied national standards:
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
In every country, the warranty conditions issued by our responsible distribution organization apply. We will remedy any malfunctions on the machine free of charge during the warranty period, provided that the cause is a material or manufacturing defect. In the event of a warranty claim, please contact your dealer or the nearest authorized service center, enclosing the proof of purchase.
www.kaercher.com/REACH
Controls
1 Device switch 2 Detergent solution button 3 Push handle 4 Brush drive button 5 Cable holder 6 Detergent tank 7 Spray bottle holder 8 Push handle fastener 9 Brush replacement button 10 Dirt collection container 11 Mesh 12 Detergent solution outlet 13 Cylindrical brushes 14 Brush drive overload protection 15 Detergent tank holder 16 Detergent tank cover 17 Detergent hose connector 18 Nozzle, here in delivery-ready state 19 Nozzle holder
2006/42/EC (+2009/127/EC)
2014/30/EU
Applied harmonized standards:
EN 55014-1: 2006+A1: 2009+A2: 2011
EN 55014-2: 2015
EN 60335-1
EN 60335-2-72
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 62233: 2008
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
In each country, the warranty conditions issued by our responsible distribution organization apply. Any malfunctions of the device during the warranty period will be repaired free of charge, provided that the cause is a material or manufacturing defect. In the event of a warranty claim, please contact your dealer or the nearest authorized service center with your proof of purchase.
Accessories and spare parts
- Only use accessories and spare parts that are approved by the manufacturer. Original accessories and original spare parts guarantee that the device can operate safely and without interference.
- You will find an overview of the most frequently needed spare parts at the end of these operating instructions.
- You can obtain additional information about spare parts at www.kaercher.com in the Service section.
Before starting up the device for the first time, read these
original operating instructions, act in accordance with them, and keep them for later use or for the subsequent owner.
Contents
Safety instructions. BG...1
Function. BG...1
Intended use BG . .2
Environmental protection BG...2
Maintenance elements .BG.2
Before first start-up . BG...3
Before start-up
LIIA BG...3
Operation BG.3
Transport BG...5
Storage BG...5
Order of connection BG...5
Troubleshooting BG...6
Technical data BG...7
EC Declaration of Conformity BG...8
Warranty BG...8
Disposal BG...8
Spare parts BG...8
Safety instructions
Before commissioning, read and follow the operating instructions and the enclosed brochure "Safety instructions for power tools" 5.956-251.0
Symbols used in the operating instructions
DANGER
For immediate danger that can lead to serious injury or death.
3a HenocpecdmbeHo epo3ra oanachocm, KOrmo bdu do mexku melechu noepedu unu do cMbpm.
In case of a possible dangerous situation, the device must be switched off immediately.
DANGER
In case of a possible dangerous situation, the device must be switched off immediately to avoid injury or material damage.
Function
The cleaning agent for carpets is applied with the spray system. The two moving parts spray the cleaning agent onto the carpet. After a relatively short time, the carpets are dry and can be walked on. After drying, the carpet connected to the cleaning agent is vacuumed with a vacuum cleaner with a brush. The working width of 430 mm and the capacity of the reservoir for cleaning agent of 7.5 l allow effective cleaning.
The action in the carpet allows for high productivity without limiting the working time.
Instructions
The device can be equipped with various accessories in accordance with the corresponding instructions for cleaning. Information about our catalog or visit us on the Internet at www.kaercher.com.
Intended use
Use this device only in accordance with the instructions given in this operating manual.
- This device for cleaning carpets is intended for cleaning carpets, high-pile and upholstered coverings in interior spaces. - The temperature range of the application is between +5°C and +40°C. - The device may only be equipped with original accessories and spare parts. - The device is designed for cleaning floors in interior spaces resp. on covered surfaces. - This device is intended only for professional use.
www.kaercher.com/REACH
Maintenance elements
1 Carpet cleaning device 2 Button for cleaning solution 3 Spray lance 4 Button for locking the brushes 5 Cable holder 6 Reservoir for cleaning agent 7 Nozzle for the aerosol bottle 8 Fixator for the brush holder 9 Button for changing the brush 10 Reservoir for dirty water 11 Plate 12 Outlet for cleaning solution 13 Rollers with brushes 14 Protection against overloading of the brush locking 15 Nozzle for the reservoir for cleaning agent 16 Cap for the reservoir for cleaning agent 17 Coupling marking for cleaning agent 18 Dose, supplied with the device 19 Nozzle for the dose
Put the device into operation
Figure 1, Remove the cover.
→ Insert the plug into the socket and place the device on top of the other, as shown in the figure.
Figure 2, Remove the cover.
→ Connect the cable between the device and the socket. → Plug in the electrical plug into the socket.
Chairman of the Board of Management
S. Reiser Director Regulatory Affairs & Certification
Documentation assistant: S. Reiser
Alfred Kärcher SE & Co. KG
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
In every country, the warranty conditions published by our authorized distributor apply. Any damage to your device will be repaired free of charge within the warranty period, provided it is due to a material or manufacturing defect. In the event of a warranty claim, please contact your distributor or the nearest authorized service center, presenting the proof of purchase.
Accessories and spare parts
Only use original accessories and original spare parts. The original accessories and original spare parts guarantee that the device is safe and trouble-free to operate. You will find the list of spare parts required in the chapter entitled "Spare parts" in the operating instructions. Further information on spare parts can be obtained at www.kaercher.com in the Service area.
www.kaercher.com/REACH
Control elements
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Control elements
1 Device foot switch 2 Cleaning solution button 3 Guide handle 4 Brush drive button 5 Cable holder 6 Cleaning solution tank 7 Aerosol holder 8 Push handle lock 9 Brush replacement button 10 Dirt tank 11 Mesh filter 12 Cleaning solution outlet 13 Brush roller 14 Brush drive overload protection 15 Cleaning solution tank holder 16 Cleaning solution tank vent 17 Cleaning solution hose connection 18 Nozzle, in storage position 19 Nozzle holder
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
Authorized to prepare documentation:
S. Reiser
Alfred Kärcher SE & Co. KG
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
www.kaercher.com/REACH
Controls
1 Device switch 2 Cleaning solution button 3 Push handle 4 Brush engagement button 5 Cable holder 6 Cleaning agent tank 7 Spray nozzle holder 8 Push handle lock 9 Brush replacement button 10 Dust bag 11 Strainer 12 Cleaning solution drain nozzle 13 Brush rollers 14 Brush overload protection 15 Holder for cleaner tank 16 Cleaner tank lid 17 Cleaner hose coupling 18 Ready-to-use nozzle 19 Spray nozzle holder
Initial startup
1 p. See cover page.
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
Control elements. UK...2
Before first use. UK...3
Before starting work. UK.3
Operation UK.3
Transport UK...5
Storage UK.5
Maintenance and service. UK...5
Additional information in the appendix UK...6
Technical characteristics..UK...7
Declaration of conformity with the European Union. UK...8
Warranty. UK...8
Spare parts list UK...8
Safety rules
Before first use of the device, please read this instruction manual and the safety rules brochure for working with 5.956-251.0.
Symbols in the manual
DANGER
For danger that directly threatens and leads to serious injuries or death.
WARNING
For a potentially dangerous situation that may lead to serious injuries or death.
CAUTION
For a potentially dangerous situation that may lead to minor injuries or material damage.
The cleaning agent is applied using the spray system. Two opposing jet nozzles spray the cleaning agent. After applying a small amount of the agent, it dries and becomes accessible for wiping. The connected cleaning agent tank is then rinsed using the jet nozzle. The working width is 430 mm and the tank capacity for the cleaning agent is 7.5 liters, ensuring effective cleaning.
The cleaning in the network ensures high productivity without limiting work.
Accessories
Depending on the cleaning tasks, the device can be equipped with various accessories. Please refer to our catalog or visit our website at www.kaercher.com.
Proper Use
Use this device exclusively in accordance with the instructions in this manual.
- This device is intended for cleaning floors, upholstery, and coverings with short pile and ceramic tiles in indoor areas. - The operating temperature range is between +5°C and +40°C. - Only original accessories and original spare parts may be used with the device. - This device was developed for cleaning indoor surfaces that are under load. - This device is intended exclusively for commercial use.
Environmental Protection
| Materianni уразковки пдадаютыся поразбци дли nobotrophо викориссан. Будь ласka, не викIDsаITE нakуваьни мaterianni разOM i3 домашим сmitтам, вддайеix деля nobotrophо викориссан. | |
| Стapi пистою мicitаях; materianni, за можуту використоыbatис NOВТОРно. Баразец', мастою та схожi materianni He NobINHI notparNTU y Habkoniiшné середовиши. Тому, удь ласka, утпізүйтө стapi пистою за допомогою сpeцialьнх сисем 3бору сmitтя. |
Instructions for handling components (REACH)
Current information on components is available on the website at:
www.kaercher.com/REACH
Control Elements
1 Spray trigger 2 "Spray cleaning agent" button 3 Handle 4 "Brush drive" button 5 Cable holder 6 Tank for cleaning agent 7 Spray lance holder 8 Handle lock 9 Trigger lock 10 Dirt water tank 11 Suction filter 12 Cleaning agent spray outlet 13 Brush shaft 14 Brush drive overload protection 15 Cleaning agent tank holder 16 Cleaning agent tank cap 17 Connection element for spray lance 18 Nozzle, ensures spray delivery 19 Handle holder
Fig. 1, rear view
→ Insert the cable duct into the device and connect it according to the sequence indicated in the drawing.
Fig. 2, rear view
→ Connect the cable connectors between the device and the cable duct. Insert the connector into the cable duct.
Fig. 3, rear view
→ Guide the cable duct cable to the device through the cable duct opening and secure the duct to prevent disconnection.
Fig. 4, rear view
→ Fully insert the cable duct into the device. → Tighten the additional screws and close. → Fill the duct with lubricant. Insert the plug into the socket. Set the device switch to "I". → Flush the water system by pressing the "Min wash" button. Set the device switch to "0". Remove the plug from the socket.
Before starting work
Installation
→ Install the cable duct vertically and secure it. → Tilt the device back and place it on the cable duct. Slide the new cable drum onto the shaft and lock it on the opposite side.
Operation
△DANGER
Danger of electric shock.
Disconnect the appliance from the mains before any maintenance. Do not use the appliance with a damaged cable. Replace a damaged cable with the help of an electrician.
Danger of electric shock due to a damaged mains cable. The mains cable must not come into contact with hot surfaces, oils, or sharp edges.
The device is ready for use after setting the main switch to the "0" position.
Pressing the device
Set the required pressure vertically and secure it. Press the device against the wheel and move to the work site.
Filling the device
CAUTION
Safety during use. Use only recommended cleaning agents. When using other cleaning agents, the operator assumes increased risk from the point of view of work safety, occupational safety, and changes in the service life of the device. Use only cleaning agents that are not corrosive, do not contain chlorine, and are not flammable. Follow the safety instructions provided on the packaging of the cleaning agents.
Do not use damaged, unsafe, or toxic cleaning agents.
NOTIFICATION
Follow the dosage instructions. Recommended cleaning agents:
| З actocувашия 3acíб дя | чишения |
| Проміжné чишения КИЛМИВ | RM 768 iCapsol |
Dosage 6%:
| ОБ'EMS заимовеня вори [літрив] | ОБ'EMS заимовеня RM 768 [мл] |
| 1 | 60 |
| 2 120 | |
| 3 180 | |
| 4 240 | |
| 5 300 | |
| 6 360 | |
| 7 420 |
Remove the container for the cleaning agent
The capacity of the cleaning agent container is filled in the tank. The capacity can be found on the device:
Press the locking element of the cleaning agent container and remove it from the capacity. The upper edge of the cleaning agent container is visible in the device. Remove the container for the cleaning agent.
Fill the container for the cleaning agent.
Fill the tank with cleaning solution. Fill the tank with enough space for the cleaning solution. → Drain the tank according to the product instructions. → Close the tank lid. → When using, install the tank for the cleaning solution on the device.
MUTTA
→ Before cleaning the spilled solution, use the accessory. → Pull the mold out of the container and turn the outlet of the solution. Insert the power plug into the socket. Turn on the motor of the steam path and pull the steam path back. Install the accessory with the "I" mark. Press the "Steam" button - the steam will rotate. Press the "Clean" button - the cleaning solution will be applied while the button is pressed. → Holding the accessory by the steam path, guide it along the surface to be cleaned.
SURFACE
Danger of injury from the device. Do not touch the device while it is in place.
NOTICE
Apply the cleaning solution when moving forward. After that, apply the cleaning solution to the surface in a cross pattern.
End of work
→ Set the steam path vertically and secure it. Install the accessory in the floor basin (preferably with the brushes). → After working with the protective cover, see the "Maintenance and technical service" section. Set the accessory switch to "0". → Pull the plug out of the socket. → Wind the power cable around the steam path. Danger of injury from water that is dripping.
Transportation
SURFACE
Danger of injury during transportation! When transporting, pay attention to the device.
→ When transporting the device in vehicles, follow local regulations aimed at protecting against collisions and overturning.
Storage
SURFACE
Handle the machine with care! When storing, pay attention to the device base. This device should be stored only in indoor premises.
In case of malfunction that cannot be fixed using the table, contact the service center.
Troubleshooting
| Hecnpabhnicb Ycunennna | |
| Прилад He 3anycakcTbCЯ Перевирпи, чь BCTabNeHa штencelbHa BvilkaВpo3eTKy. | |
| Скнунуни посяп тахувалын 3anobixkHnK, BtncHyBshniNoTo. | |
| Перевирпи, чь He 3abokvbalncя шткn BhacliDOK3abpydhennny, BnilaHnTn 3abpydhennny. | |
| Миний 3acicHe NaheceHo a6o NaheceHo 3aHaITo MaNo | Очирпи citKu. |
| Витягуну phopсуну, помпи пд прOTоHоU BODOi 3HOBy BCTabHnTn.3amInHnTn HacadKy. | |
| Перевирпи повilingисть установки 3'eДнУВальHOrOelemente shlaHra Дли миного 3acoby. | |
| Недостати pe3yltat OuchiSeHnY | Перевирпи шткн Ha п徳met 3noShyBaHnry, пri Neobxidnocti 3amInHnTn. |
| Перевирпи Do3yBaHnry миного 3acoby. | |
| Пристri Вбрue Перевирпи Кр | peKTNicbпocадкшitok. |
| Замину шткови BaI. | |
| Занypпи шткови BaI等相关. на 15xb. у rapяч Body(приблизhoi Tempepatури 80°C). |
Technical specifications
EC Directive
2006/42/EC (+2009/127/EC)
2014/30/EU
Applied harmonized standards
EN 55014-1: 2006+A1: 2009+A2: 2011
EN 55014-2: 2015
EN 60335-1
EN 60335-2-72
EN 61000-3-2: 2014
EN 61000-3-3:2013
EN 62233: 2008
National norms
Personally responsible for this document, as well as on behalf of the management.
H. Jenner
Chairman of the Board of Management
S. Reiser
Director Regulatory Affairs & Certification
Authorized employee for document management:
S. Reiser
Alfred Kärcher SE & Co. KG
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/04/01
Warranty
We provide a warranty for the product in accordance with the manufacturer's warranty terms. We repair or replace any defects in workmanship and materials free of charge throughout the warranty period, provided they are caused by material or manufacturing defects. In case of warranty claims, contact the seller or the nearest authorized service center with proof of purchase.
Spare parts list
- WARRANTY
- CONTENTS
- SAFETY INSTRUCTIONS
- SYMBOLS IN THE OPERATING INSTRUCTIONS
- DANGER
- WARNING
- CAUTION
- FUNCTION
- NOTE
- PROPER USE
- ENVIRONMENTAL PROTECTION
- NOTES ABOUT THE INGREDIENTS (REACH)
- CONTROL ELEMENTS
- DURING FIRST START-UP
- FIGURE 1, SEE COVER PAGE
- FIGURE 2, SEE COVER PAGE
- FIGURE 3, SEE COVER PAGE
- FIGURE 4, SEE COVER PAGE
- BEFORE STARTUP
- INSTALLING THE BRUSHES
- OPERATION
- NOTICE
- DRIVE THE MACHINE
- FILLING IN DETERGENTS
- REMOVING THE DETERGENT TANK
- FILL DETERGENT TANK
- CLEANING
- FINISH OPERATION
- TRANSPORT
- STORAGE
- CARE AND MAINTENANCE
- MAINTENANCE SCHEDULE
- AFTER THE WORK
- WEEKLY
- YEARLY
- MAINTENANCE WORKS
- REPLACING THE BRUSH ROLLERS
- MAINTENANCE CONTRACT
- TROUBLESHOOTING
- △DANGER
- FAULTS
- TECHNICAL SPECIFICATIONS
- EU DECLARATION OF CONFORMITY
- ACCESSORIES AND SPARE PARTS
- CONTROLS
- ADJUSTMENT
- OPERATING ELEMENTS
- REISER
- GUARANTEE
- BEFORE FIRST USE
- FIG. 1, SEE REVERSE SIDE
- ORIGINAL SPARE PARTS
- GARANCIA
- BEFORE COMMISSIONING, READ AND FOLLOW THE OPERATING INSTRUCTIONS AND THE ENCLOSED BROCHURE "SAFETY INSTRUCTIONS FOR POWER TOOLS
- FOR IMMEDIATE DANGER THAT CAN LEAD TO SERIOUS INJURY OR DEATH
- INSTRUCTIONS
- INTENDED USE
- MAINTENANCE ELEMENTS
- PUT THE DEVICE INTO OPERATION
- FIGURE 1, REMOVE THE COVER
- FIGURE 2, REMOVE THE COVER
- INITIAL STARTUP
- P. SEE COVER PAGE
- SAFETY RULES
- SYMBOLS IN THE MANUAL
- ACCESSORIES
- INSTRUCTIONS FOR HANDLING COMPONENTS (REACH)
- FIG. 1, REAR VIEW
- FIG. 2, REAR VIEW
- FIG. 3, REAR VIEW
- FIG. 4, REAR VIEW
- BEFORE STARTING WORK
- INSTALLATION
- PRESSING THE DEVICE
- FILLING THE DEVICE
- NOTIFICATION
- REMOVE THE CONTAINER FOR THE CLEANING AGENT
- FILL THE CONTAINER FOR THE CLEANING AGENT
- MUTTA
- SURFACE
- END OF WORK
- TRANSPORTATION
- SPARE PARTS LIST
Brand : Kärcher
Model : BRS 43500 C
Category : Steam cleaner