Q: How to record audio with the HYPERX QuadCast microphone?

To record audio with the HYPERX QuadCast: Connection and setup Connect the microphone to your computer or console using the supplied USB cable The QuadCast is automatically recognized as an audio input device Check in your system's audio settings that the QuadCast is selected as the active input microphone Using the controls Use the gain knob located at the base of the microphone to adjust the audio input level Select the appropriate polar pattern for your use: cardioid (front recording), omnidirectional (sound all around), stereo, or bidirectional Connect headphones to the 3.5 mm headphone jack to monitor your recording in real-time Recording Once set up, the QuadCast works like a standard microphone with any recording software: Audacity, OBS, Zoom, Discord, your gaming software, or any other audio recording application. The device captures in high quality (48 kHz) for professional recordings.

Q: How to download and install the HyperX NGENUITY software for the Cloud Flight?

HyperX NGENUITY is the official free software that allows you to customize your HyperX Cloud Flight . It lets you create custom equalizer profiles, program headset buttons, and monitor battery level in real-time. Download and installation steps: Go to hyperxgaming.com/ngenuity via your browser Select your operating system (Windows or Mac) Download the HyperX NGENUITY installation file Run the downloaded installer and follow the on-screen instructions Accept the terms of use and choose the installation folder Wait for the installation to finish and restart your computer Configuration with Cloud Flight: Once the software is installed, connect your headset to your PC via the provided wireless USB adapter. Launch HyperX NGENUITY and your Cloud Flight will be automatically detected. You can then customize EQ profiles (treble, bass, etc.), program headset buttons for custom shortcuts, and check the exact battery percentage. All your settings are synchronized with the headset. The software is compatible with Windows (10 and later) and Mac. For any installation issues, visit hyperxgaming.com/support/ where you will find the latest software and firmware updates for the headset.

Q: How to configure the lighting of the G, 1, and A keys on the HYPERX Alloy Elite RGB keyboard?

To configure the lighting of the G , 1 , and A keys on your HYPERX Alloy Elite RGB keyboard, follow the steps below: 1. Install the HyperX NGENUITY software Download and install the HyperX NGENUITY software from the official HyperX website. This software is necessary to customize the RGB lighting effects of your keyboard. 2. Launch the software and connect the keyboard Open NGENUITY and ensure that your Alloy Elite RGB keyboard is properly connected to your computer. The software should automatically detect the device. 3. Access the lighting settings In the software, select the Lighting tab. You will see a visual representation of the keyboard. 4. Select the keys to customize Click on the G , 1 , and A keys in the interface to select them individually or as a group. 5. Choose colors and effects Once the keys are selected, choose the desired colors and lighting effects (static, breathing, wave, etc.). You can assign different colors to each key if you wish. 6. Save and apply the settings After configuring the effects for the keys, click on Apply or Save for the changes to take effect on the keyboard. By following these steps, you will be able to easily customize the lighting of the G, 1, and A keys according to your preferences on your HyperX Alloy Elite RGB keyboard.

Question 1

How to record audio with the HYPERX QuadCast microphone?

Accepted Answer

To record audio with the HYPERX QuadCast:

Connection and setup

Connect the microphone to your computer or console using the supplied USB cable
The QuadCast is automatically recognized as an audio input device
Check in your system's audio settings that the QuadCast is selected as the active input microphone

Using the controls

Use the gain knob located at the base of the microphone to adjust the audio input level
Select the appropriate polar pattern for your use: cardioid (front recording), omnidirectional (sound all around), stereo, or bidirectional
Connect headphones to the 3.5 mm headphone jack to monitor your recording in real-time

Recording

Once set up, the QuadCast works like a standard microphone with any recording software: Audacity, OBS, Zoom, Discord, your gaming software, or any other audio recording application. The device captures in high quality (48 kHz) for professional recordings.

Question 2

How to adjust the speed and RGB effects on the HyperX Alloy Core RGB keyboard?

Accepted Answer

Change RGB effects and adjust speed

The HyperX Alloy Core RGB keyboard offers several lighting modes and settings that you can control directly with the function keys:

Change lighting mode: Press F2 to cycle through the 6 available effects:

Color cycle (default)
Spectrum wave
Breathing
Static
5 Zones
Aurora

Adjust speed: For compatible modes (Color cycle, Spectrum wave, and Aurora), use F7/F8 to change the speed between three levels: slow, medium, and fast. The Static and 5 Zones modes do not support speed adjustment.

Set brightness: Press F1 to select between three brightness levels: off, 50%, and 100%.

Customize colors: For Breathing and Static modes, use F6 to cycle through the nine available colors: red, orange, yellow, green, turquoise, blue, purple, pink, and white.

5 Zones mode: Select the 5 Zones mode with F2, then press F1 to F5 to customize each zone (F1 controls the left zone, F5 the right zone). Each press cycles through the nine colors or turns off the illumination of that zone.

Question 3

How to download and install the HyperX NGENUITY software for the Cloud Flight?

Accepted Answer

HyperX NGENUITY is the official free software that allows you to customize your HyperX Cloud Flight. It lets you create custom equalizer profiles, program headset buttons, and monitor battery level in real-time.

Download and installation steps:

Go to hyperxgaming.com/ngenuity via your browser
Select your operating system (Windows or Mac)
Download the HyperX NGENUITY installation file
Run the downloaded installer and follow the on-screen instructions
Accept the terms of use and choose the installation folder
Wait for the installation to finish and restart your computer

Configuration with Cloud Flight: Once the software is installed, connect your headset to your PC via the provided wireless USB adapter. Launch HyperX NGENUITY and your Cloud Flight will be automatically detected. You can then customize EQ profiles (treble, bass, etc.), program headset buttons for custom shortcuts, and check the exact battery percentage. All your settings are synchronized with the headset.

The software is compatible with Windows (10 and later) and Mac. For any installation issues, visit hyperxgaming.com/support/ where you will find the latest software and firmware updates for the headset.

Question 4

The microphone of the Cloud Flight is not working - how to reactivate it?

Accepted Answer

If your HyperX Cloud Flight microphone is not responding, here are the verification and troubleshooting steps:

1. Check the microphone activation

Press the D button (at the bottom) to turn the microphone on/off. You will see a red LED light up when the mic is active.
If the LED is off, the microphone is deactivated - press the D button to turn it back on.

2. Check the microphone control

The A button (at the top) turns the microphone control on/off. Make sure it is also activated.

3. Operating system settings

On PC: Plug in the USB adapter, then set the headset as the default device and select "HyperX Cloud Flight S Chat" as the default communication device in the audio settings.
On PS4: Go to audio settings and select "USB Headset (HyperX Cloud Flight S)" for input and output.

4. Custom settings

Use the HyperX NGENUITY software to check and adjust the equalization (EQ) settings and button configurations if necessary.

If after these checks the microphone still does not work, ensure that the mic is properly attached to the headset (it is removable and detachable) and that the battery is not drained (battery life: 30 hours).

Question 5

How to configure the lighting of the G, 1, and A keys on the HYPERX Alloy Elite RGB keyboard?

Accepted Answer

To configure the lighting of the G, 1, and A keys on your HYPERX Alloy Elite RGB keyboard, follow the steps below:

1. Install the HyperX NGENUITY software

Download and install the HyperX NGENUITY software from the official HyperX website. This software is necessary to customize the RGB lighting effects of your keyboard.

2. Launch the software and connect the keyboard

Open NGENUITY and ensure that your Alloy Elite RGB keyboard is properly connected to your computer. The software should automatically detect the device.

3. Access the lighting settings

In the software, select the Lighting tab. You will see a visual representation of the keyboard.

4. Select the keys to customize

Click on the G, 1, and A keys in the interface to select them individually or as a group.

5. Choose colors and effects

Once the keys are selected, choose the desired colors and lighting effects (static, breathing, wave, etc.). You can assign different colors to each key if you wish.

6. Save and apply the settings

After configuring the effects for the keys, click on Apply or Save for the changes to take effect on the keyboard.

By following these steps, you will be able to easily customize the lighting of the G, 1, and A keys according to your preferences on your HyperX Alloy Elite RGB keyboard.

User manual HYPERX : user manuals and guides in PDF

Models HYPERX most viewed

Browse manuals HYPERX by appliance type

Recent questions about devices HYPERX