Q: How to bathe a newborn with the Chicco Cuddle & Bubble Comfort bathtub? Do I need to buy an additional reducer?

No, you do not need to buy an additional reducer. The Chicco Cuddle & Bubble Comfort bathtub comes with a padded fabric reducer (C5) specifically designed for the first months of life. This reducer easily attaches via buttonholes and Velcro. Steps to bathe your newborn: First, prepare - Gather all necessary accessories (soap, towel, diaper) close to the bathtub before starting. Never take your eyes off your baby. Check the temperature - Use a thermometer to ensure the water does not exceed 38°C. Mix the water to avoid hot or cold spots. Install the reducer - For the first months, use the provided padded fabric reducer. It attaches securely and provides safe support for your baby. Gently immerse - Place your baby in the reducer, keeping them within arm's reach at all times. Only one adult should supervise the bath. Maximum safety - The non-slip bottom of the bathtub prevents slipping. Do not leave the bath under any circumstances. The Chicco Cuddle & Bubble Comfort bathtub is suitable from birth (0-12 months, up to 11 kg) and it is foldable for easy storage. It also includes a head washer and a compartment for the sponge.

Q: How to fix and lock the front wheels of the stroller?

To fix the front wheels of your CHICCO Trolley Me: Insertion until click : Insert the front wheels into their housing until you hear or feel a distinct click. This click confirms that the locking mechanism is automatically engaged. Check : Before each use, always check that the wheels are securely fixed by attempting to shake them slightly. To remove the wheels: Press the release button (visible in figure 16 of the manual) to free the wheels. This simple and intuitive system ensures secure locking without any additional steps.

Question 1

How to bathe a newborn with the Chicco Cuddle & Bubble Comfort bathtub? Do I need to buy an additional reducer?

Accepted Answer

No, you do not need to buy an additional reducer. The Chicco Cuddle & Bubble Comfort bathtub comes with a padded fabric reducer (C5) specifically designed for the first months of life. This reducer easily attaches via buttonholes and Velcro.

Steps to bathe your newborn:

First, prepare - Gather all necessary accessories (soap, towel, diaper) close to the bathtub before starting. Never take your eyes off your baby.
Check the temperature - Use a thermometer to ensure the water does not exceed 38°C. Mix the water to avoid hot or cold spots.
Install the reducer - For the first months, use the provided padded fabric reducer. It attaches securely and provides safe support for your baby.
Gently immerse - Place your baby in the reducer, keeping them within arm's reach at all times. Only one adult should supervise the bath.
Maximum safety - The non-slip bottom of the bathtub prevents slipping. Do not leave the bath under any circumstances.

The Chicco Cuddle & Bubble Comfort bathtub is suitable from birth (0-12 months, up to 11 kg) and it is foldable for easy storage. It also includes a head washer and a compartment for the sponge.

Question 2

How do I properly remove the CHICCO Seat105 i-Size car seat from my vehicle?

Accepted Answer

Removing the CHICCO Seat105 i-Size car seat involves several steps depending on the part you wish to remove.

Removing the cover

Detach the seat belt from the car seat
Remove the strap protectors
Use the buttons provided to release the central lower flap of the cover
Free the elastic bands at the base of the seat
Lift and remove the cover

Removing the headrest

Lift the flap at the base of the headrest
Remove the headrest

Removing the seat from the vehicle

Press the N button to release the first Isofix connector
Press the U button to free the second Isofix connector
Retract the support leg (O) using the adjustment button (P)
Lift the seat to completely remove it from the vehicle

Important advice: Never use the seat without its cover. After any accident, even minor, the seat should be replaced rather than reinstalled.

Question 3

What are the adjustment positions of the parental handle?

Accepted Answer

The parental handle of the CHICCO Seety 2 offers 3 height adjustment positions to fit your body shape.

How to adjust the height

To change the height of the handle:

Press the unlock button located in the center of the handle
Move the handle to the desired position among the 3 available positions
Release to engage the automatic locking that keeps the handle in place

Check after each adjustment that the locking mechanism has properly engaged to ensure stability and safety during use.

Question 4

How to clean and maintain the CHICCO Kory Plus i-Size car seat?

Accepted Answer

The CHICCO Kory Plus i-Size car seat features a completely removable cover that makes regular cleaning easy. Here are all the detailed instructions for proper maintenance.

Removing the cover

To remove the cover:

Detach the seat belts from the car seat
Remove the shoulder pads through the slots in the backrest
Unhook the elastics located under the seat of the car seat
Completely remove the cover

Washing the cover

The cover is washable by hand or in the machine at 30°C. However, the reducer cushion (included for children up to 60 cm) must only be washed by hand. Absolutely adhere to the following restrictions:

Do not bleach
Do not tumble dry (no dryer)
Do not iron
Do not dry clean
Never use abrasive detergents or solvents

Important: Do not wring the cover. Allow it to dry naturally without twisting. The car seat must never be used without its cover to ensure the child's safety.

Removing the headrest

The headrest has a removable cover. To clean it, detach the button located at the back of the headrest to separate it from the structure, then slide off the cover.

Cleaning plastic and metal parts

Only use a damp cloth to clean the plastic or varnished metal parts. Never use abrasive detergents or solvents, which could damage the materials. The moving parts of the seat should not be lubricated in any way.

Regular checks

It is advisable to regularly check the integrity of the components: ensure that the padding of the cover is not escaping and that the seams remain intact, examine the safety harness for any abnormal fraying of the fabric, and check that the plastic parts show no signs of damage or discoloration.

Storage and preservation

When the seat is not installed in the car, store it in a dry place, away from heat sources and protected from dust, moisture, and direct sunlight. The cover can only be replaced with an original part approved by Chicco, as it is an integral part of the seat's safety.

Question 5

The clip that secures my front wheel does not stay properly engaged during use

Accepted Answer

The issue you are describing concerns the locking mechanism (clip) that secures the front wheel to the axle of the CHICCO Dolomiti stroller. Here’s how to resolve this malfunction:

Checks to Perform

Position of the locking lever - Ensure that the front wheel lever is properly lowered (downwards). When it is in the raised position, the wheels remain free to turn. A mispositioned lever can give the impression that the clip is not holding.
Engagement of the wheel - When inserting the wheel, you should hear and feel a distinctive click when the metal pin properly engages in the housing.
Cleaning the mechanism - Check that the notching housing and the metal pin are not obstructed by sand, dust, or debris. Clean gently with a dry cloth. According to the manual, it is necessary to regularly check the condition of the metal contact areas.
Synchronization of the two front wheels - Remember that both front wheels must always be locked or unlocked at the same time. If one wheel has a problem, it can affect the overall mechanism.

If the problem persists

If after these checks the clip still does not engage properly, the fastening mechanism may be worn or defective. In this case, contact CHICCO customer service (the stroller generally comes with a warranty against manufacturing defects).

Question 6

How to fix and lock the front wheels of the stroller?

Accepted Answer

To fix the front wheels of your CHICCO Trolley Me:

Insertion until click: Insert the front wheels into their housing until you hear or feel a distinct click. This click confirms that the locking mechanism is automatically engaged.
Check: Before each use, always check that the wheels are securely fixed by attempting to shake them slightly.

To remove the wheels: Press the release button (visible in figure 16 of the manual) to free the wheels.

This simple and intuitive system ensures secure locking without any additional steps.

Question 7

Where can I find the list of vehicles compatible with the CHICCO OASYS 2/3 FIXPLUS?

Accepted Answer

The official list of vehicles compatible with the CHICCO OASYS 2/3 FIXPLUS's FixPlus rigid connectors is not included in the user manual. This list is managed separately by Chicco as it needs to be updated regularly as new vehicles are tested and approved.

Important: The CHICCO OASYS 2/3 FIXPLUS offers two distinct installation modes:

Universal mode (without FixPlus connectors): Works with all vehicles equipped with a standard 3-point seat belt - this is the most flexible mode and does not require any list verification.
Semi-universal mode (with FixPlus connectors): Uses the FixPlus rigid connectors to attach to the vehicle's ISOFIX anchor points - this mode is only compatible if your vehicle is on the official Chicco list.

How to obtain the official FixPlus vehicle list:

Visit the official Chicco website for your country: chicco.fr, chicco.de, chicco.co.uk, chicco.es, chicco.pt, chicco.be, or chicco.com depending on your location - the list of compatible vehicles is generally available for free download there.
Contact Chicco customer service directly - contact details can be found on the Chicco website for your country.
Check the documentation provided at purchase - the list may be included in the seat packaging as a separate document or printed on the notice.
Consult your retailer or a professional car seat installer - they can directly verify the FixPlus compatibility of your vehicle.

Tip: If you are unsure about the FixPlus compatibility of your vehicle, use the universal mode with the vehicle's 3-point seat belt - it works immediately without prior verification. The FixPlus connectors provide better stability and comfort, but they are just an additional device to the seat belt, which remains mandatory at all times.

Question 8

The monitor charges but does not turn on - what to do?

Accepted Answer

Your CHICCO Classic Audio is charging but does not turn on? Here’s how to diagnose the problem:

Check for a full charge

Follow the charging duration: Leave the batteries to charge for at least 10 hours with the unit off and the power adapter plugged into the power and charging connector.
Make sure the adapter is properly connected to a working power outlet.

Turn on the device correctly

Press the power button on the parent unit.
Check that you see a steady green light - this indicates that the device is on.
If you only see a steady red light, it means the battery is almost drained - it needs to be charged longer.

If no light appears

Test the adapter on another electrical outlet to check if it works.
Visually inspect the charging cable and connector for any damage.
If the device has been unused for a long time, extend the charge to 12 hours: rechargeable batteries can be completely drained.

Tip: Remember that you have two units (parent and child) - make sure to charge and turn on the correct unit!

Question 9

How to fold the Chicco Bellagio 2 stroller?

Accepted Answer

To fold the Chicco Bellagio 2 stroller, first ensure that your children are far enough away from the stroller during the operation and that the storage basket is empty. Also, check that the moving parts of the structure will not touch them during folding.

The folding procedure is the same regardless of the stroller's configuration, whether the seat is in place or not, and whether you are using the stroller facing the parents or facing the road. You must first adjust the handle height to the lowest position, which corresponds to the folding position.

Once the handle is lowered, press the folding button and simultaneously lift the seat adjustment lever by pushing it forward. The structure will fold automatically once this action is performed. This operation works regardless of the direction of use of the stroller.

If you have previously removed the seat from the stroller and wish to fold only the frame, press down on the crossing levers located on the sides of the chassis. The frame will then fold automatically at this stage.

To avoid any issues during folding, ensure that the structure is not damaged and that all mechanisms are functioning correctly. If you encounter unusual resistance when folding, check that no obstacle is blocking the mechanism and that all parts are properly aligned.

Question 10

How to remove the front wheel of the Chicco Bellagio 2?

Accepted Answer

To remove the front wheel of your Chicco Bellagio 2, follow these steps:

Use a sharp object (such as a pen or a key) to press into the slot located at the front of the chassis (see figure 4 in the manual).
Once the slot is activated, pull the wheel down to detach it.

Note: The rear wheels are removed differently by pulling a release lever. Before rolling after reinstallation, check that the wheels are securely attached by pulling them outward.

User manual CHICCO : user manuals and guides in PDF

Models CHICCO most viewed

Browse manuals CHICCO by appliance type

Recent questions about devices CHICCO