Q: Can the fabrics of the i-Spin Grow Signature seat straps be removed and detached for cleaning?

No, the strap fabrics are not removable. The 5-point harness of the i-Spin Grow Signature seat is an integrated piece, with the shoulder straps attached to the seat structure. However, you can clean the seat by removing the seat cover , which is removable and washable. According to the manufacturer's instructions: Wash the cover in cold water at less than 30°C Let it dry in the shade Avoid bleach and organic solvents Do not wring or iron For the straps themselves, clean them in place with cold water and a soft cloth and let them dry. The strap fabrics cannot be removed as they are an integral part of the restraint system.

Q: How to attach the canopy of the Joie Chrome 2?

Here’s how to attach the canopy of your Joie Chrome 2: First, make sure the backrest is pushed all the way forward Press on the backrest if the adjustment to the upright position is not easy Follow the detailed illustrations on pages 8-1 of the manual to attach the canopy to the chassis Important tips: Once installed, avoid removing the canopy regularly Before folding the stroller, always fold the canopy first If the stroller is wet after use, open the canopy and let it dry completely before folding it

Q: How do I adjust the reclining angle of the Joie Parcel LX?

The Joie Parcel LX stroller has 4 adjustable reclining angles to adapt your child's comfort to your needs. How to adjust the recline To recline the backrest : press the recline handle located at the back of the seat, then pull towards you To raise the backrest : push the handle upwards The manual mechanism allows you to gradually move from one position to another until you reach the desired angle among the 4 available positions.

Q: How do I remove the headrest from the Joie i-Prodigi seat?

The headrest of the Joie i-Prodigi seat is removable and its removal depends on your child's growth stage. Removing the headrest The seat has 8 headrest positions that adjust with the child's shoulders. The headrest is part of the integrated infant insert (recommended for children up to 80 cm). You can remove the headrest portion of the insert when it no longer fits comfortably to your child's body shape. This operation is generally done in two steps: Start by removing the top part (headrest) of the insert when the fit at the shoulders becomes uncomfortable Then, remove the body part of the insert when comfort decreases further The bottom cushion can then serve as an independent back support To physically remove the headrest, gently free it from its side attachments and lift it to detach it from the seat. Refer to the installation diagrams in the manual to precisely identify the attachment points.

Question 1

How to adjust the legs of the Joie Savvy?

Accepted Answer

The Joie Savvy is a baby carrier whose leg adjustment is mainly done via the leg opening adjustment buttons (item 4 in the product nomenclature).

Adjustment Steps

Use the leg opening adjustment buttons to adapt the spacing to your baby's size and comfort.
Ensure that the baby's legs are in the M position - this ensures correct and safe positioning in accordance with hip dysplasia prevention recommendations.
The side leg tightening buckles (item 5) can be adjusted to the appropriate size to comfortably hold your baby's legs.
Check the leg hooks (positions 1 and 2) that allow you to adjust the positioning of the legs according to comfort and safety.

The important thing is that your baby is securely and comfortably held, with legs naturally spread in the M position.

Question 2

Can the fabrics of the i-Spin Grow Signature seat straps be removed and detached for cleaning?

Accepted Answer

No, the strap fabrics are not removable. The 5-point harness of the i-Spin Grow Signature seat is an integrated piece, with the shoulder straps attached to the seat structure.

However, you can clean the seat by removing the seat cover, which is removable and washable. According to the manufacturer's instructions:

Wash the cover in cold water at less than 30°C
Let it dry in the shade
Avoid bleach and organic solvents
Do not wring or iron

For the straps themselves, clean them in place with cold water and a soft cloth and let them dry. The strap fabrics cannot be removed as they are an integral part of the restraint system.

Question 3

How to use and maintain the infant insert of the Joie Spin 360 GTI?

Accepted Answer

Infant Insert: Usage and Maintenance

The infant insert (vložka) of the Joie Spin 360 GTI is designed for children measuring less than 60 cm. It enhances side protection and comfort for the baby by properly positioning their head and body.

Usage Mode: The insert should be used only in rear-facing mode. When adjusting the seat to forward-facing mode, the insert should not be installed.

Removable Components:

Head support - remove when the child's head no longer fits
Body support - remove when the shoulders no longer fit comfortably
Support cushion - can be used separately to support the back

Maintenance: The soft parts of the insert can be washed in cold water (less than 30°C) and should be dried in the shade. No bleaching, no ironing, and no dry cleaning.

Question 4

How to attach the canopy of the Joie Chrome 2?

Accepted Answer

Here’s how to attach the canopy of your Joie Chrome 2:

First, make sure the backrest is pushed all the way forward
Press on the backrest if the adjustment to the upright position is not easy
Follow the detailed illustrations on pages 8-1 of the manual to attach the canopy to the chassis

Important tips:

Once installed, avoid removing the canopy regularly
Before folding the stroller, always fold the canopy first
If the stroller is wet after use, open the canopy and let it dry completely before folding it

Question 5

What are the steps to fold the Joie Honour stroller?

Accepted Answer

Here’s how to correctly fold your Joie Honour stroller in a few simple steps:

Folding Steps

Press the adjustment buttons on the support bar to release it
Turn the support bar down until it clicks into the low/storage position
Release the storage latch from its holder to activate it
The latch will automatically secure once the stroller is completely folded - your stroller is now locked

The folded stroller can stand independently, making storage and transport easier.

Important Points

Safety: The low position should only be used for folding - never place your child in it. Ensure that all accessories or car seats are detached before folding the stroller.

Unfolding: To open the stroller, simply release the storage latch and lift the handle up. You will hear a click indicating that the stroller is fully open and locked.

Question 6

Can the Joie Traver Shield be used as a booster without the backrest?

Accepted Answer

No, the Joie Traver Shield is not designed to be used without the backrest. The adjustable high backrest is an integral part of the seat's safety structure and is not removable.

This seat is certified according to the UN ECE R44/04 standard as a high back booster for children weighing 9 to 36 kg (approximately 9 months to 12 years). The backrest and the height-adjustable headrest are essential elements for:

Protecting the child's head and neck
Ensuring the correct positioning of the vehicle's seatbelt
Complying with mandatory safety standards

What is removable according to the manual are the soft parts (such as the insert cushion recommended for children weighing 9 to 18 kg), which can be removed following the illustrated instructions. However, this does not transform the seat into a booster without a backrest.

If you need a booster seat without a backrest, you should consider a different model specifically designed for that function.

Question 7

How do I adjust the reclining angle of the Joie Parcel LX?

Accepted Answer

The Joie Parcel LX stroller has 4 adjustable reclining angles to adapt your child's comfort to your needs.

How to adjust the recline

To recline the backrest: press the recline handle located at the back of the seat, then pull towards you
To raise the backrest: push the handle upwards

The manual mechanism allows you to gradually move from one position to another until you reach the desired angle among the 4 available positions.

Question 8

How do I remove the headrest from the Joie i-Prodigi seat?

Accepted Answer

The headrest of the Joie i-Prodigi seat is removable and its removal depends on your child's growth stage.

Removing the headrest

The seat has 8 headrest positions that adjust with the child's shoulders. The headrest is part of the integrated infant insert (recommended for children up to 80 cm).

You can remove the headrest portion of the insert when it no longer fits comfortably to your child's body shape. This operation is generally done in two steps:

Start by removing the top part (headrest) of the insert when the fit at the shoulders becomes uncomfortable
Then, remove the body part of the insert when comfort decreases further
The bottom cushion can then serve as an independent back support

To physically remove the headrest, gently free it from its side attachments and lift it to detach it from the seat. Refer to the installation diagrams in the manual to precisely identify the attachment points.

Question 9

How do I remove the infant headrest from the Joie i-Prodigi?

Accepted Answer

The infant headrest of the Joie i-Prodigi can be removed in two simple steps:

Remove the head support part when the child's head no longer fits comfortably in it.
Then remove the body part when the child's shoulders are no longer comfortable with the insert.

The integrated infant insert is recommended for children under 80 cm. You can keep the lower part of the insert as a back support once the headrest is removed.

For the complete details on the attachments to remove, refer to steps 23-27 of the manual provided with your seat.

Question 10

How do I remove the seat from the Joie Mimzy 2In1 for packing or storage?

Accepted Answer

Disassembly Procedure for Packing

To remove the seat from the Joie Mimzy 2In1 for storage or transport, follow these steps:

Detach the 5-point harness that secures the child
Pull the straps from the back of the seat cushion to loosen them
Remove the two straps from the edge of the seat to completely detach the cushion

Once the seat is removed, to fully fold the high chair for storage:

First remove the removable tray by pressing the button located under the tray and pulling it out
Adjust the seat to the lowest position
Set the footrest to horizontal
Fold the seat, then the frame
Store the tray on the back legs

User manual Joie : user manuals and guides in PDF

Models Joie most viewed

Browse manuals Joie by appliance type

Recent questions about devices Joie