GPB 18V-3 C Professional - Radio BOSCH - Free user manual and instructions

USER MANUAL GPB 18V-3 C Professional BOSCH

3D rendered image of a Bosch electric shock absorber device (no text or symbols visible)

Read all the safety and general instructions. Failure to observe the safety and general instructions may result in electric shock, fire and/or serious injury.

Keep all the safety and general instruc-

tions for future reference.

▶ Always check the radio before use. Stop using the radio if you discover any damage. Do not open the radio yourself, and have them repaired only by a qualified specialist using only original replacement parts. Damaged radios increase the risk of electric shock.

Do not expose the radio to rain or wet conditions. Water entering the radio increases the risk of an electric shock.

▶ Do not modify or open the battery. There is a risk of short-circuiting.

In case of damage and improper use of the battery, vapours may be emitted. The battery can set alight or explode. Ensure the area is well ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system.

If used incorrectly or if the battery is damaged, flammable liquid may be ejected from the battery. Contact with this liquid should be avoided. If contact accidentally occurs, rinse off with water. If the liquid comes into contact with your eyes, seek additional medical attention.

Liquid ejected from the battery may cause irritation or burns.

The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.

When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws or other small metal objects that could make a connection from one terminal to another. A short circuit between the battery terminals may cause burns or a fire.

▶ Only use the battery in the manufacturer's products. This is the only way in which you can protect the battery against dangerous overload.
▶ Only charge the batteries using chargers recommended by the manufacturer. A charger that is suitable for one type of battery may pose a fire risk when used with a different battery.

Protect the battery against heat, e.g. against continuous intense sunlight, fire, dirt, water and moisture. There is a risk of explosion and short-circuiting.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Any use of such marks by Robert Bosch Power Tools GmbH is under license.

When using it for an extended period of time, set the radio to a medium volume. A loud volume can cause hearing damage over an extended period of time.
▶ Protect the radio against direct water contact. Water entering the radio increases the risk of an electric shock.
- Keep the battery compartment cover and the flap of the connector compartment closed if possible. The closed flaps protect the radio against water and dust.

Product Description and Specifications

For more information, you can scan the QR code or access the online operating instructions: https://rb-pt.com/160992AC2H

Product Features

The numbering of the product features refers to the representation of the radio in the figures.

(1) Display
(2) On/off button
(3) Speaker
(4) Carrying handle
(5) Preset buttons
(6) Rod antenna

(7) SOURCE button

(8) Mute button

(9) ▷ Seek button (scan up)

(10) △ Seek button (scan down)

(11) ✘ Bluetooth® button

(12) Battery compartment cover

(13) Battery compartment cover locking lever

10 | English

(14) Battery compartment cover spring elements
(15) Battery holder
(16) USB Type-C ^® port ^A)
(17) Connector compartment
(18) Battery release button ^B)
(19) Rechargeable battery ^B)
(20) Utility hook

A) USB Type-C ^® and USB-C ^® are trademarks of USB Implementers Forum.

B) This accessory is not part of the standard scope of delivery.

Display Elements

(a) Multi-function indicator
(b) Multi-Speaker Sound display
(c) Bluetooth® indicator
(d) Storage space indicator
(e) Battery charge indicator
(f) Mute indicator
(g) Pause indicator
(h) Time indication (GPB18V-3SC)

Technical Data

Construction site radio GPB18V-3C GPB18V-3SC

Article number	3 601 DA3 2.. 3 601 DA3 3..
Bluetooth®
- Operating frequency range MHz 2402-2480 2402-2480
- Max. transmission power mW 10 10
Protection ratingA)	IP54 IP54
Recommended ambient temperature during charging °C 0 to +35 0 to +35
Permitted ambient temperature during operationB) and during storage	°C -20 to +40 -20 to +40
Compatible rechargeable batteries GBA18V...	GBA 18V...	GBA18V...
	GBA 18V...	GBA 18V...
	ProCORE18V...	ProCORE18V...
	EXPERT18V...	EXPERT18V...
	EXBA18V...	EXBA18V...
	CORE18V...	CORE18V...
Recommended battery chargers GAL18...	GAL 18...	GAL18...
	GAL 18...	GAL 18...
	GAL 36...	GAL 36...
	GAL12V/18...	GAL12V/18...
	GAL 12V/18...	GAL 12V/18...
	GAX 18...	GAX 18...
	EXAL18...	EXAL18...

USB Type-C® power supply with Power Delivery (USB-PD, commercially available)

Output voltage	V 20 20
Minimum output current	A	2.25	2.25
Recommended output power for full functionality ^c)	W 45 45

A) When the battery compartment cover (12) and connector compartment (17) are closed
B) Limited performance at temperatures < 0 °C
C) If the power supply provides insufficient power, the radio will switch itself off.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.

Energy supply

Energy can be supplied to the radio via a Bosch lithium-ion rechargeable battery (19) or via a commercially available USB Type-C® power supply with Power Delivery (USB-PD).

Operation with Battery Pack

Bosch sells radios without rechargeable batteries. You can tell whether a rechargeable battery is included with the radio by looking at the packaging.

▶ Use only the chargers listed in the technical data. Only these chargers are matched to the lithium-ion rechargeable battery of your radio.

Lithium-ion rechargeable batteries are supplied partially charged according to international transport regulations. To ensure full rechargeable battery capacity, fully charge the rechargeable battery before using your tool for the first time.

Replacing a Rechargeable Battery

» Disengage the locking lever (13) of the battery compartment cover and open the battery compartment cover (12).
» Press the battery release button (18) and pull the rechargeable battery (19) out of the battery compartment. Do not use force to do this.
» Push the charged battery into the battery holder (15) until it clicks into place.
» Close the battery compartment cover (12) and lock it.

To insert particularly large rechargeable batteries, the battery compartment cover (12) can be removed.

» To do this, open the battery compartment cover (12).
» Press the spring elements (14) of the attachment against each other and remove the battery cover.

Please note that, without the battery compartment cover, the rechargeable battery and battery compartment are no longer protected against moisture and dirt. Reattach the battery cover as soon as you have removed the large rechargeable battery.

Battery charge indicator

When the rechargeable battery is inserted, you can see the state of charge of the battery (19) in the display. When the rechargeable battery is removed, you can see this on the battery itself.

Recommendations for Optimal Handling of the Battery

Protect the battery against moisture and water.

Only store the battery within a temperature range of -20 to 50 °C. Do not leave the battery in your car in the summer, for example.

Occasionally clean the ventilation slots on the battery using a soft brush that is clean and dry.

A significantly reduced operating time after charging indicates that the battery has deteriorated and must be replaced. Follow the instructions on correct disposal.

Operation with Power Supply

▶ Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the type plate of the power supply.

For mains operation, use only a USB Type-C® power supply with Power Delivery (USB-PD). Its output voltage, minimum output current and output power must comply with the requirements in the "Technical Data" section. Consult the operating instructions for the power supply. Using different power supplies can damage the radio. If the power supply provides insufficient power, the radio will switch itself off.

» Open the flap covering the connector compartment (17).
» Connect the power supply to the USB Type-C® port (16) of the radio via a suitable cable.
» Connect the power supply to the mains supply.

i After removing the cable for the power supply, reattach the flap of the connector compartment (17) to protect against dirt/debris.

As soon as the radio is connected to the mains via the power supply (including if a rechargeable battery is inserted), energy will be supplied via the power supply.

Audio Operation

Switching On and Off and Controlling the Volume

» Press the ⏻ button to switch the radio on or off.
» Turn the button to adjust the volume.
» Press the 5 button to switch the sound on or off.

Selecting an Audio Source

» Press the SOURCE button.
» Turn the SOURCE button until the required audio source is shown on the display.
» Press the SOURCE button to confirm the audio source.

The following audio sources are available:

• GPB18V-3SC: digital radio via DAB+ ( display on the (a) multi-function indicator)
• Analogue radio via FM ( display on the (a) multi-function indicator)
• External audio source (e.g. Smartphone) via the Bluetooth® connection (display)
• Playback via Multi-Speaker Sound (display)

Connecting an external audio source

Connection via Bluetooth®

» Select Bluetooth® as the audio source on the radio.

→ If the last audio source is available via Bluetooth®, a connection to this audio source is automatically established.

12 | Français

If no saved audio sources are available, the connection search process will start automatically.

» Activate the new connection on the external audio source.
To stop an existing connection and start searching for another audio source, press the button for longer than 0.5 seconds.

Connection via Multi-Speaker Sound

» Select Multi-Speaker Sound as the audio source on the radio.

→ If a Multi-Speaker Stream is available, a connection to this stream is established automatically.

For more information, you can scan the QR code or access the online operating instructions: https://rb-pt.com/160992AC2H

Utility hook

Your radio is equipped with a utility hook (20) for hanging it up, for example, from a ladder. To do so, turn the utility hook to the required position.

Maintenance and Service

Maintenance and Cleaning

Keep the radio and power supply clean to ensure good, safe operation.

Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.

After-Sales Service and Application Service

Great Britain

Tel. Service: [phone]

You can find the link to our service addresses and warranty conditions on the last page.

In all correspondence and spare parts orders, please always include the 10-digit article number given on the nameplate of the product.

Transport

The recommended lithium-ion batteries are subject to legislation on the transport of dangerous goods. The user can transport the batteries by road without further requirements.

When the batteries are shipped by third parties (e.g. air transport or forwarding agency), special requirements on packaging and labelling (e.g. ADR regulations) must be met. A dangerous goods expert must be consulted when preparing the items for shipping.

Dispatch battery packs only when the housing is undamaged. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. Please also observe the possibility of more detailed national regulations.

Disposal

Radios, batteries, accessories and packaging should be sorted for environmentally friendly recycling.

Do not dispose of radios and batteries in household waste!

Only for EU countries and United Kingdom:

Electrical and electronic equipment or used batteries that are no longer suitable for use must be collected separately and disposed of in an environmentally friendly manner. Use the designated collection systems. Incorrect disposal may cause harmful effects on the environment and human health, due to the potential presence of hazardous substances.

Français

Calle Robert Bosch No. 405

C.P. 50071 Zona Industrial,

Toluca - México, RFC: RBO910102QJ9

Tel.: [phone]

Tel.: [phone]

20 | Português

España

https://rb-pt.com/160992AC2H

Tlf. Service Center: 44898855

https://rb-pt.com/160992AC2H

Hak do zawieszenia

https://rb-pt.com/160992AC2H

Grep varje

(19) Akumulators ^8

https://rb-pt.com/160992AC2H

Electrician. Let't stay

https://rb-pt.com/160992AC2H

خطاف التعليم

Declaration of Conformity

Hereby, Robert Bosch Limited as authorised representative acting on behalf of Robert Bosch Power Tools GmbH declares that the radio equipment type GPB18V-3C/GPB18V-3SC is in compliance with the Radio Equipment Regulations 2017. The full text of the declaration of conformity is available at the following internet address:

-> https://gb-doc.bosch.com

ii

UK CA

Servicekontakte

Service Contacts

Contacts de Service

https://www.bosch-pt.com/serviceaddresses

Garantiebedingungen Guarantee Conditions Conditions de Garantie Condiciones de Garantía

QR code image containing encoded data, no visible human-readable text

https://www.bosch-pt.com/guarantee/202507