BDS 43150 C Classic - Floor cleaner Kärcher - Free user manual and instructions

USER MANUAL BDS 43150 C Classic Kärcher

Exterior view of a two Polish cleaning machine with dual levers (no text or symbols visible)

Deutsch 3

English 9

Français 15

Italiano 22

Nederlands 29

Español 35

Português 42

Dansk 49

Norsk 55

Svenska 61

Suomi 67

Ελληνικά 73

Türkçe 80

Русский 86

Magyar 93

Čeština 99

Slovenščina 105

Polski 111

Românește 117

Slovenčina 123

Hrvatski 129

Srpski 135

Български 141

Eesti 148

Latviešu 154

Lietuviškai 160

Українська 166

Қазақша 173

العربية 184

4x 20 Nm

Technical line drawing of a mechanical assembly with no visible text or symbols

H. Jenner Chairman of the Board of Management

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

Please read and comply with these original instructions prior

to the initial operation of your appliance and store them for later use or subsequent owners.

Environmental protection .... EN 1

Warranty ...... EN 1

Proper use ...... EN 1

Safety instructions..... EN 2

Install the push rod ..... EN 2

Device elements ..... EN 2

Start up.... EN 3

Operation ...... EN 3

Shutting down ..... EN 4

Transport..... EN 4

Storage ..... EN 4

Care and maintenance ..... EN 4

Troubleshooting ..... EN 5

Accessories and Spare Parts. EN 5

Technical specifications ..... EN 6

EU Declaration of Conformity. EN 6

Environmental protection

The packaging material can be re- cycled. Please do not throw the packaging material into household waste; please send it for recycling.

Correct disposal of this product. This label indicates that the product may not be disposed of with normal household waste throughout the EU.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please recycle this product responsibly to enable sustainable reuse of material resources. To dispose of your used device, please take it to the return and collection system or contact the dealer from whom you purchased the product. The dealer will accept the product in order to recycle it in an environmentally friendly way.

Notes about the ingredients (REACH)

You will find current information about the ingredients at:

www.kaercher.com/REACH

Warranty

The warranty terms published by the relevant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in manufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Service center. Please submit the proof of purchase.

Proper use

Use this appliance only as directed in these operating instructions.

△CAUTION

This appliance is for indoor use only.

• The appliance may only be equipped with original accessories and spare parts.
  – The appliance is not suited for the use in potentially explosive environments.
• This appliance is suited for the commercial use, e.g. in hotels, schools, hospitals, factories, shops, offices, and rental companies.
• The application temperature ranges from +5^ to +40^ .

Safety instructions

Before using the appliance for the first time, read and observe these operating instructions and the accompanying brochure: Safety information for Disc single-pulley machine machines No. 5.956-659.0.

Hazard levels

⚠️DANGER

Pointer to immediate danger, which leads to severe injuries or death.

⚠ WARNING

Pointer to a possibly dangerous situation, which can lead to severe injuries or death.

△CAUTION

Pointer to a possibly dangerous situation, which can lead to minor injuries.

ATTENTION

Pointer to a possibly dangerous situation, which can lead to property damage.

Safety Devices

Safety devices serve to protect the user and must not be rendered in operational or their functions bypassed.

Lock

Prevents the device from switching on unintentionally. To switch on the device, press the unlocking button, then the ON/OFF switch.

Install the push rod

Prior to operation, the push rod must be installed as shown and the appliance has to be connected to power.

Illustration on the inside of the front cover

Device elements

The device illustration shows the BDS 43/150 C Classic device. The BDS 43/Duo C device differs slightly from this.

1 2344 ** 5 6 7 8 9 10 11 12 5

1 Actuator, disc brush / pad driver plate
2 Brush / pad driver plate
3 Dosing lever for detergent solution (option)
4 Switch ON / OFF
5 Cable hook
6 Unlocking button
7 Handle
8 Lever for level adjustment
9 Fuse for brush drive
10 Socket for accessories
11 Detergent tank (option)
12 Motor casing
13 Brush speed switch (BDS 43/Duo C only)
** not included in the scope of delivery

Start up

The power cord must be checked regularly for damages, such as cracks or aging. If damage is found, the cable must be replaced before further use.
→ Check appliance for damage, have damages repaired by customer service.

Power connection

• For connection values, see technical data and type plate.
• The electrical connections must be done by an electrician according to IEC 60364-1.

⚠️DANGER

Risk of electric shock.

- Do not drive over the mains cable.

⚠️DANGER

Risk of injury!

• Never wrap the mains cable around your body or your neck.
• Do not let the mains cable come in contact with the rotating brushes or rotating pads.

Attach the brush/pad

Note:

Please select the correct accessory for your cleaning task.

→ Disconnect the mains plug from the socket.
→ Pull the lever for level adjustment.
→ Swivel the handle to the front into a vertical position.
→ Release the lever for level adjustment.
→ Tilt the appliance rearward.

Technical line drawing of a mechanical assembly with no visible text or symbols

→ Place the disc brush/driver plate onto the actuator and turn in anti-clockwise direction.

Fill the detergent tank (option)

⚠ WARNING

Risk of damage. Only use the recommended detergents. With other detergents, the operator bears the increased risk regarding the operational safety and danger of accident.

Only use detergents that are free from solvents, hydrochloric acid and hydrofluoric acid.

Follow the safety instructions for using detergents.

→ Fill detergent solution into the detergent tank.

Operation

⚠ WARNING

Risk of injury! The operation of the appliance requires practice.

• Ensure that there are no obstacles in the area to be cleaned.
• Check the floor consistency for its suitability.
• The handling becomes more difficult with uneven or rough surfaces.

Adjust the working position of the handle

⚠ WARNING

Risk of accident due to loss of control over the appliance. Do not adjust the handle unless the motor is at a standstill.

→ Pull the lever for level adjustment.
→ Swivel the handle into a comfortable position.
→ Release the lever for level adjustment.

Select brush speed (BDS 43/Duo C only)

⚠ WARNING

Risk of accident due to loss of control over the appliance. Only operate the switch for the brush speed when the motor is at a standstill.

→ Set the switch of the brush speed to the desired speed.
LO: 150 revolutions per minute
HI: 300 revolutions per minute

Turning on the Appliance

ATTENTION

Risk of damage to the floor covering. Do not operate the appliance on the spot.

→ Insert the mains plug into a socket.
→ Adjust the handle to the desired working position. See chapter "Adjusting the working position of the handle".
→ Hold the handle with both hands.
→ Depress the unlocking button and keep it depressed.
→ Use the ON/OFF switch. To do this, swivel the handle down at least 3 steps from the vertical position.

1 2 3

Figure: Unlock the ON/OFF switch

→ Release the unlocking button.
→ Release the ON/OFF switch to interrupt operation.

Control the direction

- Left: Press the handle downward.

- Right: Raise the handle.

Cleaning

→ Apply the detergent solution to the floor or use the dosing lever of the detergent tank (option).
→ Move the appliance over the surface to be cleaned.
→ Repeat process for severe contamination.
→ Afterwards, pick up the wastewater with a wet vacuum or a cloth.

Shutting down

→ Disconnect the mains plug from the socket.
→ Pull the lever for level adjustment.
→ Move the handle into a vertical position
→ Release the lever for level adjustment.
→ Remove the detergent tank (option) and dispose of unused detergent solution.
→ Wind the mains cable around the cable hooks.
→ Rinse the detergent tank (option) with clear water.
→ Place the appliance into the parking position.
→ Remove the driver plate / disc brush.
→ Clean the casing with a damp cloth.

Transport

△CAUTION

Risk of personal injury or damage! Mind the weight of the appliance during transport.

→ Pull the lever for level adjustment.
→ Move the handle into a vertical position
→ Release the lever for level adjustment.
→ Tilt the appliance backwards into the transport position and drive it to its destination location.
→ When transporting in vehicles, secure the appliance according to the guidelines from slipping and tipping over.

Storage

△CAUTION

Risk of personal injury or damage! Consider the weight of the appliance when storing it.

→ Place the appliance into the parking position.
→ Store the appliance in a dry room, frost protected room.

Care and maintenance

⚠️DANGER

Risk of injury. Pull the plug from the mains before carrying out any tasks on the appliance.

→ Rinse contaminated disc brushes with water.

→ Wash contaminated pads at a max. temperature of 60 °C.
→ Clean the casing with a damp cloth.
→ Check the mains connection cable for damages.

Troubleshooting

⚠️DANGER

Risk of injury. Pull the plug from the mains before carrying out any tasks on the appliance.

In case of faults that cannot be remedied using the table below please contact the customer service.

Fault Remedy
Insufficient cleaning result	Replace contaminated pads and wash them at a max. temperature of 60 °C.
	Replace worn disc brush / pad.
	Rinse contaminated disc brushes with water
	Check the suitability of brush/pad and detergent for the respective use.
Appliance vibrates strongly	Check for correct seating of disc brush/pad.
	Check pad attachment.
	Position the handle lower.
Pad does not turn	Reset fuse of brush drive.
	Check if foreign bodies are blocking the brush/pad; remove the foreign bodies if required.

Accessories and Spare Parts

Only use original accessories and spare parts, they ensure the safe and trouble-free operation of the device.

For information about accessories and spare parts, please visit www.kaercher.com.

Description Order No.
BDS 43/150 C pad drive board	6.369-899.0
BDS 43/Duo C pad drive board	6.369-901.0
Scrubbing brush (red) 6.369-	895.0
Disc brush, hard (black) 6.369-	898.0
Shampooing brush, medium soft (white / blue)	6.369-896.0
Polishing brush 6.369-897.0
Polishing pad 6.371-149.0
Pad, microfibre, set (5x) 6.905-526.0
Diamond pad, coarse (white), set (5x)	6.371-256.0
Diamond pad, medium (yellow), set (5x)	6.371-257.0
Diamond pad, fine (green), set (5x)	6.371-238.0
Pad, melamine (grey/white), set (2x)	6.371-023.0
Pad, soft (white), set (5x) 6.369-469.0
Pad, medium (red), set (5x) 6.369-470.0
Pad, medium hard (green), set (5x)	6.369-472.0
Pad, hard (black), set (5x) 6.369-473.0
Water tank complete 9.753-058.0
Add-on kit additional weight 2.642-802.0

Technical specifications

		BDS 43/150 C	BDS 43/Duo C
Power connection
Mains voltage V 220-240
Frequency Hz 50
Max. power intake W	1500	1800
Type of protection IPX4
Protective class I
Socket: max. power output	W 500	1800
Maximum allowed net impedance	Ohm 0	,433
Brush/pad
Diameter mm 430
Speed 1/min 150	150/		300
Contact pressure	N/cm2	0.30
Dimensions and weights
Weight (without accessories)	kg	43	42
Length	mm 590
Width	mm 430
Height mm 1180
Top clearance	mm	90	125/370
Cable length	m	15
Content detergent tank (Option)	I	12
Values determined as per EN 60335-2-67
Total oscillation value	m/s2	<2,5
Uncertainty K	m/s2	1,5
Sound pressure level LpA	dB(A)	66,3
Uncertainty KpA	dB(A)	2
Sound power level LWA + Uncertainty KWAA	dB(A)	84

EU Declaration of Conformity

We hereby declare that the machine described below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval.

Product: Floor cleaner

Type: 1.291-xxx

Relevant EU Directives

2006/42/EC (+2009/127/EC)

2014/30/EU

2011/65/EU

Applied harmonized standards

EN 60335-1

EN 60335-2-67

EN 55014-1: 2017

EN 55014-2: 2015

EN 61000-3-2: 2014

EN 61000-3-11:2000

EN 62233: 2008

Applied national standards

The undersigned act on behalf and under the power of attorney of the company management.

H. Jenner Chairman of the Board of Management

Documentation supervisor:

S. Reiser

Alfred Kärcher SE & Co. KG

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

Entreposage .... FR 5

Entretien et maintenance .... FR 5

Assistance en cas de panne .. FR 5

www.kaercher.com/REACH

Garantie

Technical line drawing of a mechanical assembly with no visible text or symbols

2006/42/CE (+2009/127/CE)

2014/30/UE

2011/65/EU

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Garanzia

Technical line drawing of a mechanical assembly with no visible text or symbols

2006/42/CE (+2009/127/CE)

2014/30/UE

2011/65/EU

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Garantie

Technical line drawing of a mechanical assembly with no visible text or symbols

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Garantía

Technical line drawing of a mechanical assembly with gears and housing (no text or symbols)

2006/42/CE (+2009/127/CE)

2014/30/UE

2011/65/EU

H. Jenner Chairman of the Board of Management

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

Leia o manual de manual original antes de utilizar o seu apare-

www.kaercher.com/REACH

Garantia

Technical line drawing of a mechanical assembly with no visible text or symbols

2006/42/CE (+2009/127/CE)

2014/30/UE

2011/65/EU

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Garanti

Technical line drawing of a mechanical assembly with no visible text or symbols

2006/42/EF (+2009/127/EF)

2014/30/EU

2011/65/EU

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Garanti

Technical line drawing of a mechanical assembly with no visible text or symbols

→ Skivebørste/drivskive settes på medbringeren og dreies mot klokka.

2006/42/EF (+2009/127/EF)

2014/30/EU

2011/65/EU

Chairman of the Board of Management

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Garanti

Technical line drawing of a mechanical assembly with no visible text or symbols

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Takuu

Technical diagram of a cleaning machine with numbered parts and labeled features, including a close-up view of the component.

Technical line drawing of a mechanical assembly with no visible text or symbols

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Εγγύηση

Technical diagram of a cleaning machine with numbered parts and labeled features, including a close-up view of the component.

Technical line drawing of a mechanical assembly with no visible text or symbols

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Garanti

Technical line drawing of a mechanical assembly with no visible text or symbols

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Гарантия

Technical line drawing of a mechanical assembly with no visible text or symbols

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Technical line drawing of a mechanical assembly with no visible text or symbols

H. Jenner Chairman of the Board of Management

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Záruka

Technical line drawing of a mechanical assembly with no visible text or symbols

2006/42/ES (+2009/127/ES)

2014/30/EU

2011/65/EU

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

Pred prvo uporabo Vaše napra-ve preberite to originalno navo-

www.kaercher.com/REACH

Garancija

Technical line drawing of a mechanical assembly with no visible text or symbols

2006/42/ES (+2009/127/ES)

2014/30/EU

2011/65/EU

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Gwarancja

Technical line drawing of a mechanical assembly with no visible text or symbols

2006/42/WE (+2009/127/WE)

2014/30/UE

2011/65/EU

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Garantie

Technical line drawing of a mechanical assembly with no visible text or symbols

Directive UE respectate:

2006/42/CE (+2009/127/CE)

2014/30/UE

2011/65/EU

Norme armonizate utilize:

EN 60335-1

EN 60335-2-67

EN 55014-1: 2017

EN 55014-2: 2015

EN 61000-3-2: 2014

EN 61000-3-11: 2000

EN 62233: 2008

Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Záruka

Technical line drawing of a mechanical assembly with no visible text or symbols

2006/42/ES (+2009/127/ES)

2014/30/EÚ

2011/65/EU

Uplatňované harmonizované normy:

EN 60335-1

EN 60335-2-67

EN 55014-1: 2017

EN 55014-2: 2015

EN 61000-3-2: 2014

EN 61000-3-11:2000

EN 62233: 2008

H. Jenner Chairman of the Board of Management

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

Prije prve uporabe Vašeg uređaja pročitajte ove originalne radne upute, postupajte prema njima i sačuvajte ih za kasniju uporabu ili za sljedećeg vlasnika.

www.kaercher.com/REACH

Jamstvo

Technical line drawing of a mechanical assembly with no visible text or symbols

→ Pločastu četku/noseći kotur postavite na zahvatnik i okrenite ulijevo.

Punjenje spremnika sredstva za pranje (opcija)

⚠UPOZORENJE

Opasnost od oštećenja. Koristite samo preporučena sredstva za pranje. Za druga sredstva za pranje korisnik na sebe preuzima povećani rizik od nesreća i remećenja sigurnosti pri radu.

2006/42/EZ (+2009/127/EZ)

2014/30/EU

2011/65/EU

Primijenjene uskladene norme:

EN 60335-1

EN 60335-2-67

EN 55014-1: 2017

EN 55014-2: 2015

EN 61000-3-2: 2014

EN 61000-3-11: 2000

EN 62233: 2008

Primijenjeni nacionalni standardi:

H. Jenner Chairman of the Board of Management

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

Pre prve upotrebe Vašeg uređaja pročitajte ove originalno

www.kaercher.com/REACH

Garancija

U svakoj zemlji važe garantni uslovi koje je izdala naša nadležna distributivna organizacija. Eventualne smetnje na uređaju za vreme trajanja garancije uklanjamo besplatno, ukoliko je uzrok greška u materijalu ili proizvodnji. U slučaju koji podleže garanciji obratite se sa potvrdom o kupovini Vašem prodavcu ili najbližoj ovlašćenoj servisnoj službi.

Namensko korišćenje

Technical line drawing of a mechanical assembly with no visible text or symbols

→ Pločastu četku odnosno noseći kotur postavite na prihvatnik i okrenite ulevo.

Punjenje rezervoara za deterdžent (opcija)

⚠UPOZORENJE

Opasnost od oštećenja. Koristite samo preporučene deterdžente. Za druge deterdžente korisnik na sebe preuzima povećan rizik od nesreća i remećenja sigurnosti pri radu.

2006/42/EZ (+2009/127/EZ)

2014/30/EU

2011/65/EU

Primenjene uskladene norme:

EN 60335-1

EN 60335-2-67

EN 55014-1: 2017

EN 55014-2: 2015

EN 61000-3-2: 2014

EN 61000-3-11: 2000

EN 62233: 2008

H. Jenner Chairman of the Board of Management

Opunomoćeni za izradu dokumentacije: S. Reiser

Alfred Kärcher SE & Co. KG

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Гаранция

Technical line drawing of a mechanical assembly with no visible text or symbols

Chairman of the Board of Management

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Garantii

Technical diagram of a lawn mower with numbered parts and labeled features, including a close-up inset view.

Technical line drawing of a mechanical assembly with no visible text or symbols

→ Pange ketashari/padjandialus nukile ja keerake vastupäeva.

H. Jenner Chairman of the Board of Management

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Garantija

Technical line drawing of a mechanical assembly with no visible text or symbols

Chairman of the Board of Management

Director Regulatory Affairs & Certification

Pilnvarotais sagatavot dokumentāciju: S. Reiser

Alfred Kärcher SE & Co. KG

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Garantija

Technical diagram of a cleaning machine with numbered parts and labeled features

1 Laikiklis, diskinis šepetys / valymo pado diskas

Technical line drawing of a mechanical assembly with no visible text or symbols

H. Jenner Chairman of the Board of Management

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Гарантія

Technical line drawing of a mechanical assembly with no visible text or symbols

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/04/01

www.kaercher.com/REACH

Кепілдеме

Technical line drawing of a mechanical assembly with no visible text or symbols

Winnenden, 2021/04/01

البيانات الفنية

Technical diagram of a cleaning or cleaning machine with numbered parts and labeled features

1

بوسادة

2.

3

4,

5.

الضمان

Black and white icon of a hand giving a thumbs-up gesture (no text or symbols)

THANK YOU!

MERCI! DANKE! iGRACIAS!

Register your product and benefit from many advantages.

www.kaercher.com/welcome

Rate your product and tell us your opinion.

Icon showing a gear and wrench inside a square frame (no text or symbols)

www.kaercher.com/dealersearch

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28-40

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

QR code image with a central logo, likely linking to a digital resource or website.