Willen - Speakers MARSHALL - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Marshall
Model	Willen
Dimensions (W x H x D)	101.6 x 101.6 x 40.4 mm (4.0 x 4.0 x 1.6 in)
Weight	0.31 kg (0.68 lb)
Power Source	Built-in rechargeable Li-ion battery (USB-C charging)
Battery Life	Up to 15 hours (depending on usage)
Charging Time	Approximately 2.5 hours
Waterproof Rating	IP67 (dust & water resistant, submersible up to 1m for 30 minutes)
Bluetooth Version	Bluetooth 5.1
Wireless Range	Up to 10 meters (33 ft)
Driver	2 inch (50.8 mm) full-range
Output Power	10 W
Frequency Range	75 Hz - 20 kHz
MicroSD Card Slot	Yes (for MP3 playback)
Multi-Speaker Pairing	Yes (via Marshall Bluetooth app)
Controls	Physical buttons (volume, play/pause, power, Bluetooth)
Compatible Devices	Smartphones, tablets, laptops (with Bluetooth)
Box Contents	Speaker, USB-C cable, quick start guide, safety instructions

Frequently Asked Questions - Willen MARSHALL

How do I pair my Marshall Willen with a device?

Turn on the speaker by pressing the power button. Press the Bluetooth button (the speaker icon) to enter pairing mode. On your device, select 'Marshall Willen' from the Bluetooth list.

What is the battery life of the Marshall Willen?

The battery lasts up to 15 hours at moderate volume. Actual battery life varies with volume level and content.

Is the Marshall Willen waterproof?

Yes, it has an IP67 rating, meaning it is dust-tight and can be submerged in water up to 1 meter for 30 minutes.

How do I reset the Marshall Willen?

To factory reset, press and hold the Bluetooth button and the volume up button simultaneously for about 10 seconds until the LED flashes.

Can I use the Marshall Willen while charging?

Yes, you can use the speaker while it is plugged in and charging via USB-C.

Does the Marshall Willen have a microphone?

No, the Marshall Willen does not have a built-in microphone for hands-free calling.

How do I play music from a microSD card?

Insert a microSD card with MP3 files into the slot. The speaker will automatically play music from the card. Use the controls to navigate tracks.

Can I connect two Marshall Willen speakers together?

Yes, use the Marshall Bluetooth app to pair two speakers for stereo mode or party mode.

What charging cable does the Marshall Willen use?

It uses a USB-C cable. A cable is included in the box.

How do I clean the Marshall Willen?

Wipe the exterior with a soft, dry cloth. Avoid using harsh chemicals or submerging the speaker in water (despite being IP67, the cloth method is safer).

USER MANUAL Willen MARSHALL

This is an interactive document. Click on the section you are looking for.

LANGUAGES

English....003

Arabic - العربية 010

Czech – Čeština....031

Danish – Dansk ..... 038

Finnish – Suomi....066

French – Français ..... 073

German – Deutsch....080

Greek – Ελληνικά. 087

Hebrew – כְרָה 094

Hungarian – Magyar 101

Italian – Italiano 115

Japanese – 日本語.... 122

Korean-한국 129

Norwegian – Norsk 150

Polish – Polski ..... 157

Traditional Chinese – 繁體中文.....227

Turkish – Türkçe 234

Ukrainian – Українська ..... 241

DEVICE LAYOUT ENGLISH

GENERAL ENGLISH

① USB-C POWER INPUT

Charge the speaker by plugging it into a USB power source.

② FASTENING STRAP

Unhook the lower-right side of the strap by stretching it gently.

③ BLUETOOTH BUTTON

Push and hold the Bluetooth® button until the LED turns to a slow red pulse to start pairing mode.

④ MICROPHONE

The microphone lets you use Willen as a speakerphone. While in a call, push the Bluetooth button to toggle between using Willen for the call and your phone.

⑤ BATTERY INDICATOR

The 5 segment Battery indicator shows the battery charge with a steady light and a rising animation indicates charging.

⑥ CONTROL KNOB

I. Push and hold for 2 seconds to turn on/off II. Push once to play/pause III. Push right/left to skip forward/back IV. Hold right/left to fast forward/rewind V. Hold upwards/downwards to adjust the volume VI. Push once to answer or end a call VII. Push twice to reject a call

BLUETOOTH PAIRING

I. Push and hold the control knob until the speaker turns on. II. Push and hold the Bluetooth button until the LED turns to a slow red pulse. III. Select WILLEN from your audio device's Bluetooth list.

PERFORMING A FACTORY RESET

A factory reset will return the speaker to its original settings, excluding any firmware updates.

Note: This will delete all user settings and the speaker will need to be set up again.

I. Ensure that the speaker is on. II. Push and hold the Bluetooth button for 7 seconds. All indicators turn off and the speaker restarts. III. Remove WILLEN from your audio device's Bluetooth list before pairing again.

MARSHALL BLUETOOTH APP

Download the Marshall Bluetooth app to get the most out of your speaker and keep it up to date with the latest software.

CLEANING THE SPEAKER

Clean your speaker regularly to keep it fresh and last longer.

Unplug any leads before cleaning the speaker and make sure everything is completely dry before plugging in any USB power source.

The silicone sleeve and strap can be removed and cleaned separately. Use a disinfectant wipe or a lint-free cloth, slightly damp with 70% isopropyl alcohol or 75% ethyl alcohol to gently clean silicon parts. Dry them with a towel before putting them back on the speaker.

Carefully clean the speaker mesh and openings with a dry and soft brush, or a cotton swab.

• Do not use any sharp or metal objects.
• Do not use compressed air.
• Do not use products containing bleach or hydrogen peroxide.
• Do not submerge the speaker in any cleaning agents.

BATTERY CARE GUIDE

Your speaker comes equipped with a high-performance lithium-ion battery and the life span is affected by charging and usage. Follow the guidelines below to keep your battery in great condition for as long as possible.

• Avoid using fast chargers if possible. Fast charging causes stress on the battery and will degrade it.
• Avoid charging the battery when it is already full or letting it drain completely. Try keeping the charge between 30% and 80%.
• If the speaker is stored for a long time, do so with a half-charged battery and in a cool, dark, and dry place.

- Do not use or charge the speaker in hot and unventilated places, 45°C/113°F and above, such as in a parked car or by a window in direct sunlight.

- Avoid charging the battery at low temperatures, below 10°C/50°F and using the speaker below 0°C/32°F.

- Avoid strong mechanical shocks such as dropping the speaker on hard surfaces as it might damage the battery.

STACK MODE ENGLISH

Connect two or more Willen speakers in a Stack session for a bigger sound. Play anything on the main speaker and all speakers in the session will play in sync. You can adjust the volume on any individual speaker for the perfect balance.

① MAIN SPEAKER

Triple press the Bluetooth button to start or end a Stack session. The LED starts to blink until any other speaker joins the session.

② ADDITIONAL SPEAKER

Double press the Bluetooth button on any speaker you want to add to the session. The LED starts to blink until the speaker has joined a session. While in a session, the speaker will disconnect from any previously connected audio device and will try to reconnect after leaving the session.

To remove a speaker from the session, double press the Bluetooth button on that speaker.

TROUBLESHOOTING

PROBLEM CAUSE ACTION
The speaker does not turn on	The battery has no charge.	Plug the speaker into a USB power source to charge it.
Cannot connect or pair with a Bluetooth device	Bluetooth is not enabled on your device (smartphone, tablet, computer).	Activate Bluetooth on your audio device.
	The speaker is not turned on.	Push and hold the control knob for 2 seconds to turn on the speaker before setting it in pairing mode.
Cannot play in Stack mode	The playback device is not connected to the main speaker.	Make sure that your playback device (phone or computer) is paired with the main speaker.
Bluetooth connection drops out	The Bluetooth devices are too far apart, or the connection is affected due to obstacles.	Move the devices closer to each other so that they are unobstructed by obstacles such as walls or doors.

PROBLEM CAUSE ACTION
Bluetooth connection drops out	There is a strong electric field surrounding the speaker. Items such as microwave ovens, wireless network adapters, fluorescent lights and gas cookers use the same frequency range as the Bluetooth device. This may lead to electrical disturbances.	Move the speaker to another spot or turn off or move the interfering electronic device.
Erratic behaviour The speaker is not using the latest firmware version.		Download the Marshall Bluetooth app and connect to the speaker. Follow the in-app instructions to ensure that the speaker has the latest firmware version.
		There is a software error.	Perform a factory reset by pressing the Bluetooth button for 7 seconds. The speaker needs to be set up again.

MARSHALL BLUETOOTH APP

MARSHALL BLUETOOTH APP

MARSHALL BLUETOOTH APP

① USB-C STREAMING

MARSHALL BLUETOOTH APP

MARSHALLHEADPHONES.COM

Design of device and packaging are intellectual properties of Zound Industries International AB and Marshall Amplification Plc. © All Rights Reserved. MARSHALL, Marshall Amps, their respective logos, “Marshall” and “Marshall” trade dress are trademarks and intellectual property of Marshall Amplification Plc and may not be used without permission. Permission granted to Zound Industries International AB. The Bluetooth® wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Zound Industries International AB is under license. Google Play is a trademark of Google LLC. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. R 1.4