How to use the Redmond RMCM90E multi-cooker?

Question

Accepted Answer

The Redmond RMCM90E is a versatile 5-liter multi-cooker with 16 automatic programs. Here’s how to use it effectively:

Setup and program selection: Place the device on a stable surface and plug it in. Lock the lid by closing it properly. Press the Menu/Keep Warm button to access the 16 cooking modes: Multi-cooker, Rice Pudding, Stew, Frying, Soup, Steam, Pasta, Slow Cook, Boil, Cook, Grains, Paella, Yogurt/Dough, Pizza, Bread, or Dessert. The Quick Cook mode is accessible directly via its own button for express cooking of rice and grains.

Setting time and temperature: Once the program is selected, use the Hour and Min buttons to set the cooking time. Hold the button down for a few seconds to speed up the changes. For the MULTI COOK mode only, press the Temperature button to adjust the temperature (default 100 °C, range from 5 minutes to 1 hour with 1-minute intervals). Note that for STEAM and PASTA modes, the countdown only starts after the water reaches a boil, not immediately.

Time Delay and Keep Warm features: To program a delayed start (except for FRY, PASTA, and QUICK COOK), press Time Delay after setting the time and temperature. Set the desired start time from 10 minutes to 24 hours in 10-minute intervals. At the end of cooking, the device automatically activates the keep warm function, which keeps the dish between 70 and 75 °C for 24 hours. Press Reheat/Cancel to disable this function.

Starting and monitoring cooking: After configuring all settings, press Start to begin cooking. The LCD screen displays the progress indicator, cooking stages, and remaining time. For the PASTA mode, wait for the beep indicating that the water is boiling, then add the ingredients, close the lid, and press Start again. The countdown will then begin.

Particularities and safety: Never fill the pot beyond the maximum line indicated. For the MULTI COOK mode, do not set a temperature higher than 100 °C when cooking with water. If cooking at high temperatures with vegetable oil, leave the lid open. Never start the device without ingredients in the pot, as this may overheat or damage the non-stick coating. The lid locking system automatically unlocks after cooling.

Cleaning and maintenance: Allow the pot to cool completely before cleaning. The inner pot is removable and dishwasher safe. Refer to the manual for specific recommendations for other components. Regularly empty the condensation cavity located around the pot, and gently clean the central temperature sensor with tweezers if debris accumulates there.

User manual Redmond Multi-cooker : user manuals and guides in PDF

Models Redmond Multi-cooker most viewed

Other categories Redmond

Recent questions about Multi-cooker Redmond