Should a paper filter be used to vacuum dust with the Lavor WT 30 XE vacuum cleaner?

Question

Accepted Answer

For the Lavor WT 30 XE vacuum cleaner, a filter is mandatory for vacuuming dust. The manual clearly states: "Never use the device without having installed the filters." The paper filter (component 20) is optional, but at least one filter must always be installed.

The Lavor WT 30 XE has several interchangeable filter options:

Standard filter (components 21, 23, or 25) for dust vacuuming - mandatory
Foam filter (component 24) for liquid vacuuming only
Paper bag (component 20) optional, to be applied directly to the suction hose
HEPA filters optional for very fine dust (less than 0.3 µm)

In practice, you should always install a filter suitable for the type of vacuuming. For ordinary dry dust, use the standard filter provided with the device. The paper bag (20) is an optional additional accessory that can be added if desired, but it does not replace the requirement to have a filter installed.

Important: after each use, disassemble and shake your filter, then wash it and let it dry completely before reassembling it. If the filter is damaged or torn, replace it with an original Lavor filter to ensure optimal suction efficiency.

User manual Lavor Vacuum Cleaner : user manuals and guides in PDF

Models Lavor Vacuum Cleaner most viewed

Other categories Lavor

Recent questions about Vacuum Cleaner Lavor