kMix BL770 - Blender KENWOOD - Free user manual and instructions

USER MANUAL kMix BL770 KENWOOD

301 - 701U se your blender for soups, drinks, p âtés, mayonnaise, breadcrumbs,biscuit crumbs, chopping nuts and c rushing ice. Use your mill (if s upplied) for milling herbs, nuts,coffee beans, spices and purées.before using your Kenwoodappliance ● Read these instructions carefully andretain for future reference. ● Remove all packaging and anylabels. ● Wash the parts: see ‘care andcleaning’. safety

● Switch off and unplug:●●before fitting or removing parts;●●when not in use;●●before cleaning. ● Never fit the blade unit to thepower unit without theblender goblet or mill jarfitted. ● Always unplug the appliance beforeputting your hands or utensils in thegoblet. ● Always take care when handling theblade assembly and avoid touchingthe cutting edge of the blades whencleaning. ● Only operate the blender with the lidin place. ● Only use the goblet with the bladeassembly supplied. ● Never let the power unit, cord orplug get wet. ● Never use a damaged appliance.Get it checked or repaired: see‘service and customer care’. ● Never use an unauthorisedattachment. ● SCALD RISK: Hot ingredientsshould be allowed to cool to roomtemperature before blending. ● Never leave the applianceunattended when it is operating. ●

W hen removing the blender or mill f rom the power unit: ●

● wait until the blades have c ompletely stopped;●● d on’t accidentally unscrew thegoblet or mill jar from the bladeassembly. ● Never run the blender empty. ● Never blend more than themaximum capacity stated in therecommended speed chart. ● To ensure long life of your blenderand mill, do not run it for longer than60 seconds. ● Smoothie recipes - never blendfrozen ingredients that have formeda solid mass during freezing, break itup before adding to the goblet. ● Don’t use the blender as a storagecontainer. Keep it empty before andafter use. ● Always use the blender on a secure,dry level surface. ● Never place this appliance on ornear a hot gas or electric burner orwhere it could touch a heatedappliance. ● Misuse of your blender can result ininjury. ● This appliance is not intended foruse by persons (including children)with reduced physical, sensory ormental capabilities, or lack ofexperience and knowledge, unlessthey have been given supervision orinstruction concerning use of theappliance by a person responsiblefor their safety. ● Children should be supervised toensure that they do not play with theappliance. ● Only use the appliance for itsintended domestic use. Kenwoodwill not accept any liability if theappliance is subject to improper use,or failure to comply with theseinstructions. ● The maximum rating is based on theattachment that draws the greatestload. Other attachments may drawless power. English

Make sure your electricity supply is

he same as the one shown on the

nderside of the appliance.

his appliance conforms to EC

directive 2004/108/EC on

lectromagnetic Compatibility and

E C regulation no. 1935/2004 of

27/10/2004 on materials intended

for contact with food.

 speed + pulse control

1 Fit the sealing ring  to the blender

the seal is located correctly in the

Leaking will occur if the seal

is damaged or incorrectly

goblet – ensuring the blade

assembly is fully tightened.

4 Put your ingredients into the goblet.

Never blend more than 1.6

litres or more than 1 litre for

frothy liquids like milkshakes.

5 Fit the filler cap to the lid.

6 Fit the lid by pushing down until

7 Place the blender onto the power

the blender is incorrectly

Plug in and the 4 pre-program

buttons will light up.

Choose one of the following options:

elect one of the 4 pre-programmed

buttons (refer to the function selector

hart). When the required program

utton is pressed the lights on the

other 3 buttons will go out. The

blender will switch off automatically

at the end of the pre-set time. If you

wish to stop before the pre-set time,

press the selected program button

Select speed 1 (low) to 5 (High) by

turning the speed control. At the end

of blending return the speed control

to “0” before removing the blender.

(P) Pulse – operates the motor in a

start/stop action. The pulse will

operate for as long as it is held in

NOTE: The pre-program lights will

flash under the following

The power unit is plugged in but the

goblet is not fitted to the power unit.

The goblet is removed from the

power unit without switching the

speed control to “0”.

The power unit will not operate until

the control is turned to “0” and a

speed is reselected.

To blend dry ingredients - cut into

pieces, remove the filler cap, then

with the machine running, drop the

pieces down one by one. Keep your

hand over the opening. For best

results empty regularly.

When making mayonnaise, put all

the ingredients, except the oil, into

the blender. Remove the filler cap.

Then, with the appliance running,

add the oil slowly through the hole in

Thick mixtures, e.g. pâtés and dips,

may need scraping down. If the

mixture is difficult to process, add

3to use your mill (if supplied)

1 Put your ingredients into the jar.

(Refer to the mill recommended

2 Fit the sealing ring

blade unit marked – ensuring the

seal is located correctly in the

Ensure that the seal is fitted

4 Turn the mill blade assembly upside

down. Lower it into the jar, blades

down. Turn in a clockwise direction

5 Place the mill onto the power unit.

control. (Refer to the mill

recommended usage chart).

7 After milling, you can replace the

blade assembly with the mill lid.

For optimum performance when

processing spices we recommend

that you do not process more than

50g at a time in the mill.

Whole spices retain their flavour for a

much longer time than ground

spices so it is best to grind a small

quantity fresh at a time to retain the

To release the maximum flavour and

essential oils whole spices are best

roasted prior to milling.

Herbs are best chopped when clean

pre-program setting speed chart

During operation of the pre-program settings a change in speed

may be noted - this is normal

Frothing milk and milkshakes 1 litre

Smoothie drinks 1 litre liquid 60 seconds

Place the fresh fruit and liquid

ingredients in first (includes

yoghurt, milk and fruit juices).

Then add ice or frozen ingredients

(includes frozen fruit, ice or

Stock based soups 1.6 litres 30 seconds

Soups using milk 1 litre

Hot ingredients should be allowed to cool to room

temperature before blending.

Note: Slow start when program selected.

Dips, fruit and vegetable purées 200g 60 seconds

(add liquid if difficult to process).

Always switch off, unplug and

dismantle before cleaning.

Empty the goblet before unscrewing

it from the blade unit.

The blender goblet and mill jar can

be washed in your dishwasher.

Wipe with a damp cloth, then dry.

Store excess cord in the storage

area at the back of the power

blade unit by pushing up from

Care should be taken when

removing the blade unit from

the blender or mill base.

2 Remove and wash the sealing ring.

3 Don’t touch the sharp blades –

brush them clean using hot soapy

water, then rinse thoroughly under

the tap. Don’t immerse the

blade unit in water.

4 Leave to dry upside down.

Wash by hand, then dry.

service and customer

If the cord is damaged it must, for

safety reasons, be replaced by

KENWOOD or an authorised

If you need help with:

using your appliance or

servicing or repairs

Contact the shop where you bought

Designed and engineered by

ncooked Meat 100g Pulse 5 seconds

Beef Steak - cut into 2

Herbs 10g 5 5 seconds

cardamom seeds, cumin seeds,

coriander seeds, fennel seeds and

mill recommended usage chartI MPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE P RODUCT IN ACCORDANCE W ITH EC DIRECTIVE

At the end of its working life, the product

must not be disposed of as urban

It must be taken to a special local

authority differentiated waste collection

centre or to a dealer providing this

Disposing of a household appliance

separately avoids possible negative

consequences for the environment and

health deriving from inappropriate

disposal and enables the constituent

materials to be recovered to obtain

significant savings in energy and

resources. As a reminder of the need to

dispose of household appliances

separately, the product is marked with

a crossed-out wheeled dustbin.

blender- of molenbasis

was erhebliche Einsparungen an

Retire todas as embalagens e

skarpe dele under rengøring.

Børn bør overvåges for at sikre, at

3 7HN BDDAGFUF UJS KPWUFR?S LFQAEFS -

¥Fb –∞p √±d«Î ©∂OFOU