Q: What is the purpose of the fan button on the EQUATION COOL & HEAT air conditioner?

The fan button on the EQUATION TAC-09CHPB/MW (COOL & HEAT 9K) air conditioner allows you to adjust the fan speed to tailor the airflow to your comfort and energy needs. By pressing this button multiple times, you can cycle through the three available speed levels. Low speed - Quiet and discreet operation with reduced energy consumption. Ideal for nighttime use, napping, or when low occupancy of the room only requires light cooling or heating. Medium speed - Optimal balance between cooling efficiency and acceptable noise level. Suitable for most daily use situations in cooling or heating mode. High speed - Maximum cooling or heating with powerful airflow. Recommended for quick cooling of the room or to rapidly reach the desired temperature. The choice of speed directly impacts electricity consumption: a low speed consumes less electricity, while a high speed maximizes performance but increases power draw (up to 1015 W in cooling). The noise generated by the unit is approximately 64 dB(A) during normal operation. Adjust the fan speed according to your personal preferences and the climate performance you wish to achieve in your room.

Q: How to open the LOFT MINI fan for cleaning?

The EQUATION LOFT MINI fan must never be opened or disassembled by the user . The manual clearly states: "Never remove the fan grills". Any repairs or access to internal parts should be entrusted to a qualified person. How to safely clean your fan You can clean the exterior and limited accessibility of the fan according to these instructions: Always unplug the fan before any cleaning operation. Use a slightly damp cloth to wipe the metal and plastic parts. Avoid complete immersion in water or exposure to temperatures above 60°C. Do not use aggressive chemicals (gasoline, benzene, etc.). If you wish to clean the internal blades or access other components, please consult a qualified person to carry out the repair.

Q: How do I remove the water tank from the EQUATION CUBE fan? Do I need to disassemble the stop?

The manual for the EQUATION CUBE fan states that the water tank can be removed simply by lifting it. To fill it, just take it out and adhere to the MAX level indicated. However, the available manual does not specify whether the stop needs to be disassembled to access or remove the tank. Generally, with this type of misting fan, the tank can be removed directly without prior disassembly - the stop is usually a simple holding system that does not hinder removal. If you encounter resistance when removing it, try to: Firmly lift the tank from the top Check that no screws or fastening clips are tight Consult the illustrations in the physical manual if the PDF does not clearly show them For precise instructions on the mechanism of this specific part, contact Adeo Services customer support.

Q: How to replace the battery of the TH2 thermometer and respect the polarity?

The EQUATION TH2 thermometer uses a LR1130 1.5 V button cell . Replacement Steps Unscrew the screw using a Phillips screwdriver Remove the cover Replace the LR1130 1.5 V button cell Ensure that the + (positive) symbol on the battery is correctly oriented upwards or towards the positive contact, depending on the internal configuration Re-screw the cover Important Points The polarity must be respected - the + and - marks must be correctly aligned Do not short-circuit the battery contacts If you do not use the device for an extended period, remove the battery to prevent leaks Powering On After Replacement If the thermometer does not turn on after changing the battery, check that the polarity is correct (the + mark should be visible and properly positioned).

Q: What is the Nature mode for on the CUBE fan?

The Nature mode simulates a natural breeze by randomly varying the fan speed instead of maintaining a constant airflow. Instead of blowing at the same intensity all the time, the fan alternates between different speeds, creating a more pleasant and less monotonous feeling - similar to a natural breeze that is never completely regular. On your CUBE: Nature Mode : variable speeds for a natural feeling Normal Mode : constant and regular speed Night Mode : gradual reduction of speed for more discretion For example, if you select Nature mode at speed 2, the fan will alternate between speeds rather than running constantly at the same speed.

Q: How to assemble and mount the stand of the EQUATION ALTONA 4 fan?

The stand of the EQUATION ALTONA 4 fan is assembled in 8 illustrated steps detailed in your manual. Here is the order to follow: First, assemble the base components together to create a stable foundation Then attach the vertical support tube to the assembled base Install the fan head by securely screwing it onto the tube Place the safety grills to protect the blades Practical tips: Follow the order of the steps precisely - they are numbered from 1 to 8 with detailed diagrams Tighten all parts securely to prevent the fan from moving during operation Once the assembly is complete, you can adjust the height by unscrewing the support tube as needed For the tilt , slightly unscrew the tilt screw (counterclockwise), position the fan as desired, and then screw it back (clockwise) Refer to the illustrated diagrams (steps 1-8) in the PDF of the manual above - they will guide you precisely at each step of the assembly. If you still encounter an issue with a step, check that all the items provided in the box match those shown in the step 1 diagram.

Question 1

What is the purpose of the fan button on the EQUATION COOL & HEAT air conditioner?

Accepted Answer

The fan button on the EQUATION TAC-09CHPB/MW (COOL & HEAT 9K) air conditioner allows you to adjust the fan speed to tailor the airflow to your comfort and energy needs. By pressing this button multiple times, you can cycle through the three available speed levels.

Low speed - Quiet and discreet operation with reduced energy consumption. Ideal for nighttime use, napping, or when low occupancy of the room only requires light cooling or heating.
Medium speed - Optimal balance between cooling efficiency and acceptable noise level. Suitable for most daily use situations in cooling or heating mode.
High speed - Maximum cooling or heating with powerful airflow. Recommended for quick cooling of the room or to rapidly reach the desired temperature.

The choice of speed directly impacts electricity consumption: a low speed consumes less electricity, while a high speed maximizes performance but increases power draw (up to 1015 W in cooling). The noise generated by the unit is approximately 64 dB(A) during normal operation. Adjust the fan speed according to your personal preferences and the climate performance you wish to achieve in your room.

Question 2

How to activate the air conditioning mode of the EQUATION CUBE fan?

Accepted Answer

The EQUATION CUBE fan does not have a distinct "air conditioning" mode, but it is equipped with a misting function that effectively reproduces the cooling effect of an air conditioner by dispersing a fine mist of water. This function is particularly effective during the summer.

To activate the air conditioning mode (misting):

Fill the water tank to the MAX level indicated on the tray
Plug in the device and press the main switch button to turn on the fan
Then press the misting button (depicting a water droplet or waves) to activate the humidification function
The device will then emit a stream of cool air laden with fine water droplets

To optimize cooling, you can combine misting with one of the three available operating modes: the Normal Mode offers a constant and steady airflow; the Nature Mode simulates a natural variation in fan speed for more comfort; the Night Mode operates at low power, ideal for nighttime. The Nature mode is recommended for the best cooling sensation combined with misting.

Usage tip: Ensure that the water level remains above the minimum (MIN) during misting operation. In summer, regularly change the water in the tank (every 1-2 days) to avoid the formation of odors or mold. The cooling efficiency depends on the initial ambient humidity level: misting is more effective in dry environments.

Question 3

How to open the LOFT MINI fan for cleaning?

Accepted Answer

The EQUATION LOFT MINI fan must never be opened or disassembled by the user. The manual clearly states: "Never remove the fan grills". Any repairs or access to internal parts should be entrusted to a qualified person.

How to safely clean your fan

You can clean the exterior and limited accessibility of the fan according to these instructions:

Always unplug the fan before any cleaning operation.
Use a slightly damp cloth to wipe the metal and plastic parts.
Avoid complete immersion in water or exposure to temperatures above 60°C.
Do not use aggressive chemicals (gasoline, benzene, etc.).

If you wish to clean the internal blades or access other components, please consult a qualified person to carry out the repair.

Question 4

How do I remove the water tank from the EQUATION CUBE fan? Do I need to disassemble the stop?

Accepted Answer

The manual for the EQUATION CUBE fan states that the water tank can be removed simply by lifting it. To fill it, just take it out and adhere to the MAX level indicated.

However, the available manual does not specify whether the stop needs to be disassembled to access or remove the tank. Generally, with this type of misting fan, the tank can be removed directly without prior disassembly - the stop is usually a simple holding system that does not hinder removal.

If you encounter resistance when removing it, try to:

Firmly lift the tank from the top
Check that no screws or fastening clips are tight
Consult the illustrations in the physical manual if the PDF does not clearly show them

For precise instructions on the mechanism of this specific part, contact Adeo Services customer support.

Question 5

How to replace the battery of the TH2 thermometer and respect the polarity?

Accepted Answer

The EQUATION TH2 thermometer uses a LR1130 1.5 V button cell.

Replacement Steps

Unscrew the screw using a Phillips screwdriver
Remove the cover
Replace the LR1130 1.5 V button cell
Ensure that the + (positive) symbol on the battery is correctly oriented upwards or towards the positive contact, depending on the internal configuration
Re-screw the cover

Important Points

The polarity must be respected - the + and - marks must be correctly aligned
Do not short-circuit the battery contacts
If you do not use the device for an extended period, remove the battery to prevent leaks

Powering On After Replacement

If the thermometer does not turn on after changing the battery, check that the polarity is correct (the + mark should be visible and properly positioned).

Question 6

What is the Nature mode for on the CUBE fan?

Accepted Answer

The Nature mode simulates a natural breeze by randomly varying the fan speed instead of maintaining a constant airflow.

Instead of blowing at the same intensity all the time, the fan alternates between different speeds, creating a more pleasant and less monotonous feeling - similar to a natural breeze that is never completely regular.

On your CUBE:

Nature Mode: variable speeds for a natural feeling
Normal Mode: constant and regular speed
Night Mode: gradual reduction of speed for more discretion

For example, if you select Nature mode at speed 2, the fan will alternate between speeds rather than running constantly at the same speed.

Question 7

How to assemble and mount the stand of the EQUATION ALTONA 4 fan?

Accepted Answer

The stand of the EQUATION ALTONA 4 fan is assembled in 8 illustrated steps detailed in your manual. Here is the order to follow:

First, assemble the base components together to create a stable foundation
Then attach the vertical support tube to the assembled base
Install the fan head by securely screwing it onto the tube
Place the safety grills to protect the blades

Practical tips:

Follow the order of the steps precisely - they are numbered from 1 to 8 with detailed diagrams
Tighten all parts securely to prevent the fan from moving during operation
Once the assembly is complete, you can adjust the height by unscrewing the support tube as needed
For the tilt, slightly unscrew the tilt screw (counterclockwise), position the fan as desired, and then screw it back (clockwise)

Refer to the illustrated diagrams (steps 1-8) in the PDF of the manual above - they will guide you precisely at each step of the assembly. If you still encounter an issue with a step, check that all the items provided in the box match those shown in the step 1 diagram.

Question 8

How to activate the sleep mode of the PURI AIR ADAPT?

Accepted Answer

To activate the sleep mode of your PURI AIR ADAPT, simply press the SLEEP touch button located on the device.

When the sleep mode is active, the sleep mode indicator lights up on the screen. This mode reduces the noise level, making it ideal for nighttime use.

To deactivate the sleep mode, press the same SLEEP button again.

Question 9

What does the error code EL mean on an EQUATION Basic oil-filled radiator and how can it be resolved?

Accepted Answer

The error code EL displayed on an EQUATION Basic oil-filled radiator generally indicates a temperature-related issue, often overheating or a malfunction of the temperature sensor.

What to do if the error code EL appears?

Turn off and unplug the device: Disconnect the power supply and allow the radiator to cool down for at least 30 minutes.
Check the location: Ensure that the radiator is placed in a well-ventilated area, away from flammable objects and walls to avoid any obstruction of air circulation.
Inspect the power cord: Check that the cable is not damaged and is properly plugged in.
Restart the device: After cooling down, plug the radiator back in and turn it on to see if the error code disappears.

If the error code EL persists despite these checks, it may indicate a technical problem requiring the intervention of a qualified professional or customer service for appropriate diagnosis and repair.

Question 10

How to set the setpoint temperature on the EQUATION TH30DP4 thermostat?

Accepted Answer

To set the setpoint temperature on your EQUATION TH30DP4 thermostat, follow these simple steps:

Turn on the thermostat: Make sure the device is powered on and ready to be configured.
Access the setting mode: Press the button corresponding to the temperature setting. This button may be identified by a thermometer symbol or labeled "Mode".
Adjust the temperature: Use the up and down arrow keys or the rotary knob to increase or decrease the desired temperature.
Confirm the setting: If your thermostat has a confirmation button, press it to save the chosen temperature.
Check the display: Ensure that the new setpoint temperature is displayed correctly on the screen.

These steps will allow you to effectively control the temperature of your heating system via the EQUATION TH30DP4 thermostat.

User manual EQUATION : user manuals and guides in PDF

Models EQUATION most viewed

Browse manuals EQUATION by appliance type

Recent questions about devices EQUATION