Question 1

What does error code E3 mean on an EQUATION Kaltar 500W towel dryer and how can it be resolved?

Accepted Answer

The error code E3 on an EQUATION Kaltar 500W towel dryer generally indicates an overheating issue. This malfunction can occur if the device is blocked or if air circulation is hindered, preventing adequate cooling.

Steps to resolve error code E3:

Turn off and unplug the device: For safety reasons, always start by unplugging the towel dryer from the electrical outlet.
Check the location: Ensure that the towel dryer is installed in a place where air can circulate freely. Avoid placing it behind furniture, curtains, or any other objects that may block the ventilation grilles.
Clean the ventilation grilles: Check that the grilles are not blocked by dust, lint, or other debris. Regular cleaning allows for good ventilation.
Let the device cool down: Wait several minutes for the towel dryer to cool completely before turning it back on.
Restart the towel dryer: Plug it back in and turn it on to check if the error code has disappeared.

If the E3 code persists despite these checks, it is advisable to contact a professional for a more thorough inspection, as this may indicate an internal problem requiring technical intervention.

Question 2

How to connect the electrical wires (black, brown, blue) of the EQUATION Kaltar 500W towel warmer without a differentiated earth wire?

Accepted Answer

To correctly connect the electrical cable of your EQUATION Kaltar 500W towel warmer, it is important to understand the function of each wire:

Brown wire: generally used as the phase wire (or "live"), it is the wire that brings the electrical current.
Blue wire: usually the neutral wire, which completes the electrical circuit.
Black wire: may have different functions depending on the installation, but it is not systematically an earth wire.

The earth wire is normally green/yellow. If your cable does not have a clearly identified earth wire, here are the recommendations:

Do not use the black wire as an earth wire without confirmation, as this could be dangerous.
Connect the brown wire to the phase terminal of your towel warmer.
Connect the blue wire to the neutral terminal.
Leave the black wire unconnected if you are unsure of its function, or ask an electrician to check your installation.

Important: Before any manipulation, turn off the power supply to avoid any risk of electrocution. If you have any doubts about the connection, it is strongly advised to consult a qualified professional to ensure the safety of the installation.

Question 3

How does the EQUATION Kaltar 500W towel warmer work and how to use it correctly?

Accepted Answer

The EQUATION Kaltar 500W towel warmer is designed to efficiently and safely heat your towels and bathroom. Here’s how to operate it correctly:

1. Setup and Power On

Ensure that the towel warmer is securely mounted to the wall and that its electrical installation complies with current standards.
Plug the device into a suitable electrical outlet.
Switch the main power switch to the "ON" position to turn on the device.

2. Temperature Setting

Locate the thermostat or control panel on the device.
Set the desired temperature using the button or dial. Generally, several heat levels are available to suit your needs.

3. Usage

Hang your towels on the bars of the towel warmer without blocking the heating elements to ensure good heat circulation.
The towel warmer will start heating quickly, providing a pleasant warmth.

4. Timer Function (if available)

If your model is equipped with a timer, you can set it so that the device automatically turns off after a certain time, helping to save energy.

5. Turning Off the Device

To turn off the towel warmer, switch the button to "OFF" or unplug the device from the electrical outlet.

Safety and Maintenance Tips

Never cover the towel warmer with flammable materials or objects that could block heat.
Avoid placing the device too close to water sources to prevent any electrical risk.
Regularly clean the device to prevent dust accumulation and ensure optimal operation.

By following these steps, you can safely use your EQUATION Kaltar 500W towel warmer and enjoy comfortable warmth for your towels and bathroom.

Question 4

Is it normal for the EQUATION Kaltar 500W towel warmer to be hot to the touch at an ambient temperature of 19 degrees?

Accepted Answer

Yes, it is normal for the EQUATION Kaltar 500W towel warmer to become very hot to the touch, even when the ambient temperature is 19 degrees. This type of device is designed to efficiently heat towels and the air in the bathroom, which means its surface can reach high temperatures.

Why can the towel warmer be burning hot?

Normal operation: The radiator uses a power of 500W to heat quickly, which causes its surface to become hot, even burning.
Temperature setting: If the thermostat is set to a high temperature, the surface of the radiator will be hotter.

Safety tips

Avoid touching the hot surface directly to prevent burns, especially for children and pets.
Ensure that the towel warmer is installed in a safe location and that there is no risk of accidental contact.

When to worry?

If you notice that the radiator is abnormally hot to the point of deforming nearby objects, emitting a burning smell, or if there are signs of malfunction (unusual noises, flashing lights), it is advisable to have the device checked by a professional.

Question 5

How to set the EQUATION Kaltar 500W towel dryer?

Accepted Answer

To set your EQUATION Kaltar 500W towel dryer, you have two operating modes: Manual mode for direct control, and Programming mode for scheduled use over 7 days. Here’s how to configure each aspect of your device:

Initial startup: Upon first powering on, the device automatically starts in Manual mode with a set temperature of 19°C. The electronic thermostat of your Kaltar allows you to adjust the temperature to the nearest degree. Plug the device into a 230 V / 50 Hz outlet and wait at least 6 hours for the temperature to stabilize in your bathroom.

Manual Mode: In Manual mode, press the control buttons to adjust the set temperature according to your preferences (within the defined limits, 28°C by default). The device maintains this temperature permanently. This mode is ideal for immediate and flexible use. You can change the temperature at any time according to your needs.

Programming Mode: To activate Programming mode, you must first set the time and day of the week on your electronic thermostat. Once configured, the device will follow the pre-recorded internal programs for each day: it will automatically switch between Comfort temperature (your set temperature) and Eco temperature (which is 3.5°C lower than your setting). For example, the programs generally propose a Comfort temperature between 9 AM-1 PM and 7 PM-9 PM, with a reduced temperature the rest of the time. In Programming mode, you cannot manually change the temperature: it is managed automatically according to the defined program.

Boost Function: To quickly raise the temperature, use the Boost function (accessible in Manual or Programming mode). Press the Boost button: the device will then operate at maximum power for a duration that you set between 15 and 60 minutes (15 minutes by default at startup). You can increase this duration before the countdown ends. This function allows you to heat your bathroom more quickly if needed.

Memory and Locking: Your Kaltar 500W retains all your settings (programs, temperatures, calibrations) even after a power outage thanks to the built-in memory. It is possible to lock the controls to prevent any accidental changes, especially by children. After a prolonged power outage, simply check that the time and date are correct if you are using Programming mode.

Important points: The automatic air vent of your towel dryer requires no maintenance. A discrepancy between the displayed temperature and the actual temperature measured in the room may occur depending on the location and insulation of your bathroom: the device has a calibration function to adapt the thermostat to real conditions. The display of the control unit automatically turns off after a few seconds without action (backlight button available).

Question 6

How to change the default temperature on the EQUATION Kaltar 500W towel dryer?

Accepted Answer

The EQUATION Kaltar 500W towel dryer is equipped with an electronic thermostat allowing precise temperature adjustment by degree. Upon first use, the device starts in Manual mode with a set temperature fixed at 19°C. You can change this default temperature simply by using the + and - buttons located on the control box.

To adjust the temperature in Manual mode:

Press the + or - buttons to adjust the set temperature of your choice
The allowed adjustment range is 12°C to 28°C
The screen displays the selected temperature in real-time
After a few seconds without action, the setting is automatically validated

By default, the radiator is configured not to exceed a maximum temperature of 28°C. If you wish to limit the maximum setting to a lower temperature (between 19°C and 28°C), you must access the advanced functions by pressing the buttons simultaneously for 3 seconds, then select the Maximum temperature option.

An important point to remember: your settings are automatically saved in memory, even in case of a power outage. Therefore, you will not need to reconfigure your preferred temperature after a power interruption. If you use the Programming mode (with a weekly schedule), the set temperature defined in Manual mode will serve as a reference for the Comfort range. In Programming mode, you cannot directly change the temperature, but it follows the predefined ranges for each day.

If in doubt or if the actual room temperature differs from that displayed on the device, you can calibrate the thermostat using the Calibration function. This function compensates for discrepancies due to the location of the radiator or the insulation conditions of the bathroom.

User manual EQUATION Towel warmers : user manuals and guides in PDF

Models EQUATION Towel warmers most viewed

Other categories EQUATION

Recent questions about Towel warmers EQUATION