Q: How to install the grease and charcoal filters of the ELICA APLOMB hood?

Before proceeding, turn off the hood. Metal grease filter The grease filter captures cooking particles. To install it: Position it in place and push until it clicks into place To remove it, pull on the release spring lever Maintenance: Clean it every month with a mild detergent, by hand or in the dishwasher (short cycle, low temperature). The manual indicates an alert every 40 hours of use. Active charcoal filter This filter eliminates bad cooking odors. It is exclusive to filtering versions (air recycling). Place one filter on each side on the two protective grids of the motor arms Turn clockwise to secure Turn counterclockwise to remove Important: The charcoal filter cannot be cleaned or regenerated . It must be replaced every 4 months at most. The actual duration depends on your frequency of use. The manual indicates an alert every 160 hours of use.

Question 1

How to install the grease and charcoal filters of the ELICA APLOMB hood?

Accepted Answer

Before proceeding, turn off the hood.

Metal grease filter

The grease filter captures cooking particles. To install it:

Position it in place and push until it clicks into place
To remove it, pull on the release spring lever

Maintenance: Clean it every month with a mild detergent, by hand or in the dishwasher (short cycle, low temperature). The manual indicates an alert every 40 hours of use.

Active charcoal filter

This filter eliminates bad cooking odors. It is exclusive to filtering versions (air recycling).

Place one filter on each side on the two protective grids of the motor arms
Turn clockwise to secure
Turn counterclockwise to remove

Important: The charcoal filter cannot be cleaned or regenerated. It must be replaced every 4 months at most. The actual duration depends on your frequency of use. The manual indicates an alert every 160 hours of use.

Question 2

How is the control panel of the ELICA GALAXY ISLAND BLIX/A/90X45 hood fixed?

Accepted Answer

The control panel of the ELICA GALAXY ISLAND BLIX/A/90X45 hood is held in place by a system of four fastening clips combined with an electrical connection cable. This system allows for both secure fastening and easy access during maintenance.

Features of the fastening system:

Four retaining clips: The black glass panel (or sheet metal depending on the model) is held by four clips positioned at the corners or on the sides. These clips can be carefully released using a flat screwdriver to gently push them outward.
Connection cable: The panel is connected to the internal control unit by an electrical cable. This cable must be disconnected before fully removing the panel.
Integrated assembly: The user interface (touch buttons T1, T2, T3, T4 and LED indicators) is directly integrated into the panel, making it inseparable from the control system.

Accessing the panel: To access the panel, it is recommended to first remove the grease filters by pulling them down, which frees up the workspace. Then, gently release the four clips using a flat screwdriver, lift the panel slightly, and disconnect the cable. This operation should be performed carefully to avoid damaging the clips or electronic components.

If replacement or repair of the control panel is needed, it is advisable to contact the authorized ELICA technical support service, as this involves handling sensitive electrical components and connection wiring.

Question 3

How to clean the filters of the ELICA Pandora hood?

Accepted Answer

To effectively clean the filters of your ELICA Pandora hood, follow these steps:

1. Turn off and unplug the hood

Ensure that the hood is turned off and unplugged from the power supply to guarantee your safety during maintenance.

2. Remove the filters

Open the lower panel of the hood and remove the filters. Generally, they can be removed by gently pulling them down or outward.

3. Clean the metal filters

If the filters are metal (such as aluminum), you can wash them by hand with soapy hot water. Use a soft sponge to remove grease residues.
Alternatively, you can place them in a dishwasher, ensuring not to use overly aggressive cycles.

4. Drying

Let the filters dry completely in the open air before reinserting them to avoid any mold or corrosion.

5. Reinsert the filters

Once dry, reinsert the filters into the hood, ensuring they are securely fixed.

6. Check the operation

Plug the hood back in and turn it on to check that everything is working correctly.

Regular cleaning of the filters ensures better efficiency of your ELICA Pandora hood and prolongs its lifespan.

Question 4

What does the button with an arrow on the ELICA SHIRE WH/A/90 hood mean?

Accepted Answer

On the ELICA SHIRE WH/A/90 kitchen hood, the button with an arrow generally represents the suction or ventilation function of the device. Here is what it concretely means:

Upward arrow: This symbol often indicates the activation of the hood's suction, allowing it to extract smoke, odors, and cooking vapors to the outside or to a filter.
Downward arrow: Sometimes, a downward-facing arrow may symbolize the recycling or internal ventilation function, when the hood does not expel air outside but filters it and returns it to the kitchen.

On the SHIRE WH/A/90 model, the button with an arrow thus activates the suction motor, allowing you to adjust the extraction power according to your needs. It can also be used to increase or decrease the suction speed if the hood has multiple levels.

In summary, this button is essential for controlling air circulation and ensuring good ventilation during cooking.

Question 5

How to replace the filters of the ELICA BLOOM hood?

Accepted Answer

To replace and maintain the filters of your ELICA BLOOM, BLOOM-S or BLOOM-S DEKT/A/85 hood, you must first unplug the hood from the power supply by removing the plug or turning off the main switch. Wear work gloves for all maintenance operations.

Grease filter (anti-grease): This filter should be cleaned once a month or when the saturation indicator shows (flashing LED light). To remove it, pull the spring-loaded release latch located on the filter. The grease filter can be cleaned manually or in the dishwasher at low temperature with a short cycle. Washing in the dishwasher may discolor it, but its filtering characteristics remain unchanged. Once cleaned and dried, replace it by firmly inserting the filter until the latch clicks into place.

Active carbon filter (filtering version only): Unlike the grease filter, this filter cannot be washed and must be replaced, generally every 4 months at most or according to the saturation indicator of your model (alternating LED light). The carbon filter is circular in shape and must be applied one on each side, covering each airflow grid.

Filter saturation indicators: Your hood has an alert system. Upon turning it on, observe the LED light (L1) during the first 10 seconds: a flash indicates that the grease filter needs cleaning, while an alternating light sequence indicates that the carbon filter needs replacing. To reset the indicators after maintenance, press and hold the appropriate control button until the beep sounds.

After replacing the filters, plug the hood back in and test it to ensure proper operation. Important: Never remove the filters while cooking, and strictly adhere to the maintenance schedule, as failing to comply with filter cleaning standards poses fire risks.

User manual ELICA Kitchen hood : user manuals and guides in PDF

Models ELICA Kitchen hood most viewed

Other categories ELICA

Recent questions about Kitchen hood ELICA