Question 1

What does error code E2 mean on an ELICA NikolaTesla FIT XL cooktop?

Accepted Answer

Error E2 indicates an internal overheating of the electronics of your ELICA NikolaTesla FIT XL PRF0186750 cooktop. This means that the temperature of the electronic components has exceeded the safety threshold.

Possible causes

Prolonged operation at maximum power (high power levels or booster activated)
Insufficient ventilation around the cooktop or obstruction of the air vents
Accumulation of dust or debris blocking air circulation to the integrated hood
Ambient temperature too high in the kitchen

What to do immediately

Turn off the cooktop immediately by pressing the stop button
Allow it to cool completely for at least 30-45 minutes before any reuse
Do not use the appliance while it is cooling

How to prevent this from happening again

Check that the ventilation grilles (front and back) are not obstructed
Ensure there is sufficient space (at least 5 cm) around your cooktop for air circulation
Limit the use of booster modes (5 min and 15 min) to short durations
Regularly clean the suction area of the integrated hood to prevent accumulation

If error E2 reappears after complete cooling and you have checked the ventilation, contact the authorized ELICA technical service for an inspection of the internal cooling system.

Question 2

What does the code "L" displayed on my ELICA NikolaTesla Prime+ cooktop mean?

Accepted Answer

The code "L" is not listed in the official documentation for the ELICA NikolaTesla Prime+ cooktop.

According to the provided manual, the documented error codes are:

E2: Overheating - "The control zone turns off due to too high a temperature"
E3: Incompatible container
E5: Communication issues between the user interface

If the code "L" appears upon startup, it may represent:

A functioning indicator (like "H" for residual heat or "R" for automatic preheating)
An undocumented error code requiring technical intervention

Solutions:

Check that the lock button is not activated (safety feature against accidental activation)
Turn off the cooktop and turn it back on after 30 seconds
If the message persists, contact ELICA technical service to accurately identify this code specific to your device

Question 3

What does the error code E0 mean on the ELICA Nikolatesla Libra PRF0147744 hood and how can it be resolved?

Accepted Answer

The error code E0 on the ELICA Nikolatesla Libra PRF0147744 hood generally indicates a communication problem between the electronic components of the device. This malfunction may be caused by a connection fault or an internal issue within the circuits.

Steps to resolve the error code E0:

Turn off and unplug the device: Cut off the power supply by unplugging the hood for a few minutes to reset the system.
Check the connections: Ensure that all internal and external cables and connectors are properly connected, with no signs of wear or damage.
Plug back in and turn on: Reconnect the hood and turn it on to check if the error code disappears.

If the code E0 persists despite these checks, it is recommended to contact an authorized technical service for a more in-depth diagnosis and possible repair.

Question 4

What does error code E3 mean on the ELICA Nikolatesla Libra PRF0147744 hood and how can it be resolved?

Accepted Answer

The error code E3 on the ELICA Nikolatesla Libra PRF0147744 hood indicates a problem of overheating in the control area. This device has a thermal protection that automatically shuts off the cooking zone when the temperature of the electronic components becomes excessively high, which is a safety mechanism provided by the manufacturer.

Common causes of this error code include prolonged use of the induction cooktop without interruption, insufficient ventilation of the integrated hood, or clogged grease filters that reduce air circulation around the electronic components.

To resolve error code E3:

Immediately turn off the cooktop by pressing the stop button or using the touch controls to cut power to the faulty zone.
Allow to cool for 10 to 15 minutes before any further use. This forced stop is normal and allows the internal temperature to return to a safe level.
Check the ventilation: ensure that the integrated extractor hood is functioning properly and that air circulates freely. Inspect the air outlet grilles and clear any obstructions.
Clean the grease filters. On this model, the filters are dishwasher safe. Clogged filters drastically reduce the efficiency of the hood and cause heat buildup around the electronic components.
Restart the device by turning the cooktop back on. The error code should disappear after cooling down and cleaning the filters.

If error code E3 reappears immediately or persists after these steps, or if you notice that the hood is not functioning properly, contact an authorized ELICA service center. A recurring thermal issue may indicate a malfunction in the ventilation system or an electronic defect that requires professional intervention. Avoid forcing the device to restart multiple times in a row, as this could damage temperature-sensitive components.

User manual ELICA Cooker : user manuals and guides in PDF

Models ELICA Cooker most viewed

Other categories ELICA

Recent questions about Cooker ELICA