User manual SILVERCREST Microwave : 27 free PDF user manuals

Q: What is the size of the turntable of the SILVERCREST SMW 700 C1?

The turntable of the SILVERCREST SMW 700 C1 microwave has a diameter of 255 mm (approximately 25.5 cm) . It is a glass turntable that is dishwasher safe for easy cleaning. To install it correctly, the three glass pegs located under the turntable must engage in the recesses of the central axis of the turntable.

Q: The Stop button for the child lock does not beep - how to activate it correctly?

On the SILVERCREST SMW 800 F1, activating the child lock using the Stop button (button 15) works as follows: Correct Procedure Press and hold the Stop button for about 3 seconds (not just a brief press) A beep should sound and a lock icon will appear on the screen To deactivate, repeat the same operation for 3 seconds If no beep sounds: Ensure you are holding the button down for the full 3 seconds (not a quick press) The beep is a confirmation signal of the state change - its absence suggests that the command was not registered If after several attempts the beep still does not sound and the lock icon does not appear, this may indicate a malfunction of the internal control system Contact SILVERCREST customer support for diagnosis or repair The beep is a key element of the child lock - a persistent absence of sound when holding down Stop requires technical intervention.

Q: The display lights up but the microwave does not start: what to do?

If the display works but the microwave does not heat up and does not start, here are the steps to check: Basic Checks Door properly closed - The SMW 800 F1 can only start if the door is perfectly closed. Try opening and closing it firmly. Child lock activated - Check that the symbol "[: :]" does not appear on the display. If it does, press and hold the Stop (15) button for 3 seconds to deactivate the lock. Power level selected - Make sure you have selected a power level before starting the cooking. Use the Microwave button to choose between P100 (700W), P80, P50, P30, or P10. Advanced Checks Unplug the device for 30 seconds, then plug it back in to reset the system. Check that the power plug is securely inserted into the socket (230V~, 50Hz voltage required). Ensure that the glass turntable is properly in place - the device will not operate without it. If the problem persists If after these checks the microwave still does not start and the display remains on without an error code, it is likely an internal fault (magnetron or power component) that requires professional repair. Contact the authorized after-sales service.

Q: I reset the microwave but the buttons are not responding at all - how can I make them work again?

If the buttons on the SILVERCREST SMW 800 F1 are not responding, even after a reset, first check for accidental activation of the child lock . Disable the child lock Look at the display screen (3): if the symbol "[: :]" appears, it means the child lock is activated and is preventing the buttons from working. Press and hold the Stop button (15) for about 3 seconds A beep will sound when the lock is disabled All functions will become available again If the problem persists If the buttons still do not respond after disabling the child lock, perform a complete reset: Unplug the power plug (2) from the outlet Wait about 10 seconds Plug the device back in and test the buttons If the malfunction persists after these two procedures, it may be an internal electronic fault. Contact customer service at +33 1 70383158 (France).

Q: How to set the clock on the SILVERCREST SMW 700 D3 microwave?

To set the clock on your SILVERCREST SMW 700 D3 microwave, follow these steps. The clock must be set during the first use or if the power has been interrupted (the display will show 0:00 in this case). Note that the device uses a 24-hour format for time display. Press the Timer/Clock button twice (Timer/Clock button, reference no. 12 in the diagram). The hour display will start blinking. Turn the control knob (reference no. 14) to set the desired hour (from 0 to 23 in 24-hour format). Press the Timer/Clock button again. The display will now switch to minutes (which will blink). Turn the control knob to set the desired minutes (from 0 to 59). Press the Timer/Clock button one last time to confirm. The time is now set and will be continuously displayed on the screen (3) of your microwave. Once the clock is set, it will remain displayed permanently on your device's screen, except when using a cooking program. If the power supply is cut off, the clock setting will be lost and will need to be set again. This clock is independent of the cooking timer (section 11.9 of the manual) which allows you to program the cooking duration.

Models SILVERCREST Microwave most viewed

User manual SILVERCREST Microwave : user manuals and guides in PDF

Models SILVERCREST Microwave most viewed

Other categories SILVERCREST

Recent questions about Microwave SILVERCREST