How do I set the time on the SILVERCREST SWDR 500 B1 radio without a visible 'Clock' button?

Question

Accepted Answer

On the SILVERCREST SWDR 500 B1 radio, the time setting is done via the SET/STORE button (button 9), which is not labeled 'Clock' but serves this function as well as others. You must first completely turn off the device before starting.

Step one: Set the time zone
Press and hold the SET/STORE button (9) while the device is off until 'US' or 'EU' appears on the screen. Then briefly press SET/STORE (9) to access the time zone settings. Use the VOL- (12) or VOL+ (4) buttons to select your time zone (the city code and local time will appear at the top). Press SET/STORE (9) to confirm. This step is mandatory first, as the time depends on the time zone configuration.

Setting the time format
After confirming the time zone, the time format will blink on the screen. Choose between the 12-hour or 24-hour format using the VOL- (12) or VOL+ (4) buttons. Press SET/STORE (9) to confirm.

Setting the time and date
Now proceed step by step: the hour will blink, set it with VOL- (12) or VOL+ (4), then press SET/STORE (9). The minutes will then blink, set them and confirm. Continue this way for the year, month, and day. Hold the buttons down if you want to speed up the scrolling of the numbers. The day of the week is calculated automatically once you have entered the full date.

Helpful tip: If you do not see the SET/STORE button clearly labeled, it is the multifunction button numbered 9 on the front panel or in the manual. Its role changes depending on the context: in off mode, it launches the setup menu; during playback, it allows you to save stations.

User manual SILVERCREST Radio : user manuals and guides in PDF

Models SILVERCREST Radio most viewed

Other categories SILVERCREST

Recent questions about Radio SILVERCREST