HG02050 - Radio SILVERCREST - Free user manual and instructions
Find the device manual for free HG02050 SILVERCREST in PDF.
| Product Type | Portable Radio |
| Model | HG02050 |
| Brand | SilverCrest |
| Dimensions | Approx. 250 x 150 x 80 mm |
| Weight | Approx. 600 g |
| Power Supply | AC 230V ~ 50Hz or 4x AA batteries (not included) |
| Frequency Range FM | 87.5 – 108 MHz |
| Frequency Range AM | 520 – 1710 kHz |
| Number of Preset Stations | 20 (10 FM, 10 AM) |
| Speaker | Built-in mono speaker, 3 W RMS |
| Headphone Jack | 3.5 mm stereo |
| Display | LCD with backlight |
| Clock Function | Alarm clock with snooze |
| Controls | Rotary tuning, volume knob, push buttons |
| Carrying Handle | Yes, integrated |
| Antenna | Telescopic rod antenna (FM) |
| Cable Length | Approx. 1.5 m |
| Material | Plastic casing |
| Colour | Black/silver |
| Safety | Class II insulation, do not expose to water |
| Maintenance | Wipe with dry cloth; avoid solvents |
| Spare Parts | Contact manufacturer for availability |
| Repairability | Repair by qualified personnel only |
| Additional Information | Includes user manual (PDF available online) |
Frequently Asked Questions - HG02050 SILVERCREST
User questions about HG02050 SILVERCREST
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Radio in PDF format for free! Find your manual HG02050 - SILVERCREST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HG02050 by SILVERCREST.
USER MANUAL HG02050 SILVERCREST
DYNAMO CAMPING RADIO WITH LIGHT
DYNAMO CAMPING RADIO WITH LIGHT
Operation and Safety Notes
KEMPINKOVÉ RÁDIO SE SVÍTILNOU NA DYNAMO
GB Operation and Safety Notes Page 5
Scope of delivery....Page 8
Technical Data Page 8
Safety Notices......Page 9
Product-specific safety instructions ...... Page 10
Safety instructions
for rechargeable batteries......Page 12
Initial use Page 14
Charging the battery using the solar cells.....Page 14
Charging the battery using the dynamo
and hand crank......Page 14
Charging mobile devices......Page 15
Using the radio......Page 16
Using the LED light......Page 17
Cleaning and Care......Page 18
Storage Page 18
Troubleshooting......Page 18
Disposal Page 19
Warranty Page 21
Dynamo Camping Radio with Light
- Introduction
We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.
Intended Use
This product may only be connected with and operated using devices described in this instruction manual. Only use this product as described. The product is not intended for commercial use or for any other use. The manufacturer assumes no liability for damages caused by improper use.
Not suitable for ordinary lighting in household room illumination.
Parts Description
1 Carrying handle 2 LED 3 Hand crank (for the dynamo) 4 DC connection socket ((∅ 3.5 mm) for the adapter cable supplied)
5 ON/OFF switch
6 Control panel with the following buttons:
6a LIGHT (light on/off)
6b SCAN- (channel search backwards)
6c VOL- (reduce volume)
6d VOL+ (increase volume)
6e SCAN+ (channel search forwards)
6f RADIO (radio on/off)
7 Speaker
8 Adapter cable with 3.5 mm plug and USB socket
9 Solar cell
- Scope of delivery
1 Solar camping lantern, 1 Adapter cable with USB plug, 1 Instructions for use
Technical Data
| FM receiver sensitivity Over 5 μV | |
| FM frequency range 87.5–108 MHz | |
| Radio playing time after 1 minute of winding (2.5–3 rotation / s) (at 50 % volume level) | ~ 5 minutes |
| Lighting time after 1 minute of winding (2.5–3 rotation /s) | ~ 15 minutes |
| Radio playing time after 1 hour of solar charging (500W / m2) (at 50 % volume level) | ~ 4 minutes |
| Lighting time after 1 hour of solar charging (500W/m2) | ~ 25 minutes |
| Max. current flow during charging using solar cells | ~ 15 mA (750W/m2) |
| Output voltage / direct current (DC out) | 5 V --- |
| Luminous flux approx. 9 lm | |
| Dimensions approx. 76 x 76 | x 180 mm |
| Weight approx. 227 g | |
| Integrated rechargeable battery 1 | 20 mAh, 3.6 V |
| Speaker ∅ 36 mm | |
| Chromaticity coordinate X < 0.27 | |

Safety Notices
PLEASE READ THE INSTRUCTIONS PRIOR TO USE! PLEASE KEEP THE INSTRUCTIONS IN A SAFE PLACE! IF PASSING THIS PRODUCT ON TO A THIRD PARTY, INCLUDE ALL DOCUMENTS.

This product may be used by children aged 8 years and up, as well as by persons with reduced physical, sensory
or mental capacities, or those lacking experience and/or knowledge, as long as they are supervised or instructed in the safe use of the product and they understand the associated risks. Do not allow children to play with the product. Never allow children to clean or maintain this product unsupervised.
- Do not use the product if you detect any kind of damage.
- Do not operate the product near heat sources such as radiators or other devices producing heat. During the charging process, the product may heat up. Therefore, place it in a well-ventilated location during charging and do not cover it. Only charge the battery in a dry location. Protect the product from moisture and humidity. Never immerse in water or other liquids! Please refer to the instructions for your charger.
- Do not open the product and do not modify the product. The product contains no parts which can be serviced by the user.
Product-specific safety instructions
Always fully unfold the hand crank.
To improve the service life of the battery and the mechanical parts, please observe the following points:
- Do not wind the hand crank for longer than 5 minutes while the product is charging. The product will then be in normal operating mode.
- If the light becomes weaker and the radio does not work, the battery has not been charged sufficiently. If this is the case, switch off the light and the radio and wind the hand crank.
- Wind the hand crank as consistently as possible (charging works best at 2 1/2 - 3 rotations per second). Try not to wind it too fast or abruptly change direction. Winding too slowly may have an effect on the generator's charging efficiency, winding too quickly could damage the mechanism or the hand crank.
- If the product is working perfectly, stop winding the hand crank after 15 minutes.
- If you do not use the product, operate the hand crank at least once a month for at least one minute to prolong the service life of the battery. Switch off the product using the ON / OFF switch if you do not use it for an extended period of time.
- Do not expose the product to extreme temperatures and protect it from impacts. Do not drop the product.
- Do not clean the product using corrosive or other hard cleaning agents and do not use any rough materials.
- Switch off the light and radio during the charging process to improve the generator's operational performance. However, the ON / OFF switch must be in the ON position. ■ During the charging process, the product may warm up. This is normal.

Safety instructions for rechargeable batteries


RISK OF WATCHING!
DENT AND DANGER TO LIFE FOR INFANTS AND CHILDREN! Re-
chargeable batteries are not intended to be in the hands of children. Do not leave the batteries lying around. There is a danger that these will be swallowed by children or pets. If they are accidentally swallowed seek immediate medical attention.
CAUTION! EXPLOSION HAZARD!

Only use the recommended type of rechargeable batteries. Other rechargeable or single-use batteries could explode during charging.

FIRE HAZARD! Never short-circuit
rechargeable batteries. Otherwise the rechargeable batteries may overheat, become a fire hazard or explode.

EXPLOSION HAZARD! Never throw
rechargeable batteries into fire or water.
Expired or drained rechargeable batteries may leak chemicals which will damage the product. Therefore, remove the battery when the product is not required for an extended period of time.
WEAR PROTECTIVE GLOVES!

Leaked or damaged rechargeable batteries could cause chemical burns on contact with the skin; you should therefore wear suitable protective gloves at all times if such an event occurs.
Only use rechargeable batteries of the correct size and the recommended type (see section "Technical Data").
- Initial use
- Charging the battery using the solar cells
☐ Switch the product on by setting the ON / OFF switch 5 to the ON position. Place the product in the sunlight so that the solar cells 9 are supplied with enough sunlight.
The integrated rechargeable battery stores the energy generated.
- Charging the battery using the dynamo and hand crank
☐ Switch the product on by setting the ON / OFF switch 5 to the ON position.
☐ Unfold the hand crank and wind it at a speed of approx. 2.5 to 3 rotations per second.
The integrated rechargeable battery stores the energy generated.
- Charging mobile devices
ATTENTION! RISK OF PROPERTY DAMAGE!
Note: Before the charging process, you should consult the product's operating manual for the appropriate operating voltage of your end product. There is no warranty for damages which arise due to an improper operating voltage.
Note: During the charging process described below, a value of 5 V is reached for the output voltage / direct current (DC output). Ensure before use that the incoming voltage of the mobile device matches this voltage.
☐ Switch the product on by setting the ON / OFF switch 5 to the ON position. ☐ Connect the 3.5 mm-DC plug with the DC connection socket 4. Connect via USB A connection to your mobile device (not included in scope of delivery) with the USB A connection socket on the adapter cable 8. ☐ Unfold the hand crank and wind it at a speed of approx. 2.5 to 3 rotations per second. The battery of the connected mobile device will be charged using the energy generated.
Note: The charging process using the hand crank 3 takes some time before the battery voltage is high enough for mobile devices; this depends on the product's battery power.
• Using the radio
☐ Switch the product on by setting the ON / OFF switch 5 to the ON position. Press the RADIO button on the control panel 6 and hold it down for roughly 3 seconds to switch on the radio. Press the SCAN + or the SCAN - button to search for a broadcasting station during playback. The automatic search for radio stations will begin and will be interrupted if a broadcasting station with a sufficient signal strength is found. To search for another broadcasting station, go through the same process as described above. You can search forwards for broadcasting stations using the SCAN + button (frequency range of 87.5 MHz to 108 MHz) or backwards using the SCAN - button (108 MHz to 87.5 MHz).
To regulate the volume during radio playback, press the VOL + button to increase the volume or the VOL - button to decrease it. Hold the RADIO button again for roughly 3 seconds to switch off the radio.
Note: Please regulate the volume as appropriate (please think about your immediate surroundings).
Note: If possible, avoid high buildings, basements, etc. These places may interfere with the radio reception. If possible, the product should be kept away from induction ovens, fluorescent lamps, engines or other electric devices as these could also have an effect on the reception.
Note: If the internal battery charge is too low, the sound coming from the radio may become distorted or it may be barely audible.
• Using the LED light
☐ Switch the product on by setting the ON / OFF switch 5 to the ON position.
To switch on the light, press the LIGHT button on the control panel 6.
Press the LIGHT button again to switch the light off again.
- Cleaning and Care
■ Ensure that no water enters the product when cleaning. Otherwise, the product could be damaged.
- Do not clean the product using corrosive or other hard cleaning agents and do not use any rough materials. These could damage the surface.
Only clean the product with a slightly dampened cloth and a mild detergent.
Storage
Store the product in a dry, dust-free location, protected from direct sunlight.
☐ Regularly charge the battery.
Troubleshooting
Error: The product does not work.
Cause: The battery is exhausted.
Solution: Charge the battery.
Note: Electrostatic discharge can cause malfunctions. If the product does not work, switch it off and switch it on again after some time.
- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. The Green Dot is not valid for Germany.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics/20–22: paper and fibreboard/80–98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.
Defective or old rechargeable batteries must be recycled in accordance with Directive 2006 / 66 / EC and its amendments. Return rechargeable batteries and / or the product using the recycling facilities provided.

Improper disposal of rechargeable batteries may result in environmental damage!
Batteries must not be disposed of in the household waste. They could contain poisonous heavy metals and are subject to hazardous waste treatment. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead.
Warranty
The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you.
The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained improperly.
The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables
(e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.
CE
Introduction....Page 24
Intended use....Page 24
Description of parts....Page 25
Scope of delivery....Page 25
Authorized service center:
OWIM GmbH & Co. KG
Stiftsbergstraße 1
DE-74167 Neckarsulm
GERMANY
WEAR PROTECTIVE GLOVES!

WEAR PROTECTIVE GLOVES!
