User manual SILVERCREST Vacuum Sealer : 10 free PDF user manuals

Q: How to open the SILVERCREST SV 130 A1?

To open the lid of the SILVERCREST SV 130 A1, press the lid locks located on either side, then lift the lid upwards. Once opened, you can access the internal components: Lower and upper sealing gasket Sealing joint Liquid collection tray Sealing strip These components can be cleaned or replaced as needed. When closing, ensure that both corners of the lid snap correctly into place for a complete lock.

Q: What is the vacuum pressure of the SILVERCREST SV 130 A1 in kPa?

The manual for the SILVERCREST SV 130 A1 does not explicitly mention the vacuum pressure in kilopascals (kPa). The only electrical specifications provided are: Power consumption: 130 W Voltage: 220-240 V~, 50/60 Hz Protection class: II (double insulation) The 130 W you mentioned is the electrical power consumed by the device, not the vacuum pressure. For domestic vacuum sealing devices in this range, the vacuum pressure is generally between 60 and 85 kPa, but the precise value for this model is not documented in the provided manual. If this information is critical for your use, we recommend contacting Silvercrest (Lidl) customer service with the reference IAN 487863_2501 .

Q: Why does no indicator light turn on when I plug in the device?

This is normal. The SILVERCREST SV 130 A1 does not have a main power indicator that lights up simply when plugged in. The only indicators on this device are the red and green indicators integrated into the control buttons: Red indicators : appear when the main functions are activated (Seal, Vacuum and Seal) Green indicators : light up for additional functions (Wet, Soft) and external vacuuming These indicators only activate when you press the buttons to start an operation. The absence of light in standby mode is a feature of this model. If the device operates normally when in use , there is nothing to worry about. The absence of a constant power indicator is perfectly normal for this model.