How to connect an external microphone to the AVer VC520 Pro2 video conferencing system?

Question

Accepted Answer

To connect an external microphone to your AVer VC520 Pro2 video conferencing system, follow these steps:

1. Check microphone compatibility

Ensure that your external microphone has a connector compatible with the audio inputs of the VC520 Pro2, typically a 3.5 mm jack or XLR port. If necessary, use an appropriate adapter.

2. Plug in the external microphone

Connect the cable of the external microphone to the microphone input of the main unit of the VC520 Pro2. This input is often located at the back or on the side of the device.

3. Power the microphone

If your microphone requires phantom power (48 V), check if the VC520 Pro2 can provide it. Otherwise, you will need to use an external audio interface with built-in power.

4. Configure the audio source

In the audio settings of the system or video conferencing software used, select the external microphone as the audio input source so that the sound is captured correctly.

5. Test the microphone

Perform an audio test to check the quality and proper functioning of the external microphone. Adjust the volume or settings if necessary.

By following these steps, you will be able to use an external microphone with your AVer VC520 Pro2 to enhance the audio quality of your video meetings.

User manual AVer Video conferencing system : user manuals and guides in PDF

Models AVer Video conferencing system most viewed

Other categories AVer

Recent questions about Video conferencing system AVer