Premium AutoM120 - Shredder HAMA - Free user manual and instructions

USER MANUAL Premium AutoM120 HAMA

Line drawing of a modern kitchen appliance with a lid and control panel (no text or symbols)

OperatingInstructions

Bedienungsanleitung

Moded'emploi

Instruccionesdeuso

Gebruiksaanwijzing

Istruzioniperl'uso

Instrukcjaobsługi

Használatiútmutató

Manualdeutilizare

Návodkpoužití

Návodnapoužitie

Manualdeinstruções

Bruksanvisning

1. Connectingcable(backofthedevice)

5.Warningsymbols

1. Paperguideflap(automaticintake)

7.Pull-outcollectioncontainer

8.Viewingwindow

9.Onwheels

a)withwheellock(front)

b)withoutwheellock(rear)

10.MainswitchOn/Off(ontheside)

11."REVERSE"button(backwards)

1. "FORWARD" button(forwards)

13."ON/OFF"key

1. ContainerstatusLED

2. Overheating/overloadstatusLED

16.ReadystatusLED

1. Introduction

1.1 Foreword

ThankyouforchoosingaHamaproduct.

Take your time and read the following instructions and information completely. Please keep these instructions in as a safe place for further reference. If you sell the device, please pass these operating instructions to thenewowner.

Note-Importanceoftheoperatinginstructions

Failuretoobservetheoperatinginstructionswhenusingtheproductconstitutes incorrectuseorwilfulmisuseandisnotpermitted.

Note

This device is anew, unused product.

Anycuttingresiduepresentmayhavebeenleftoverfromqualityassurancetestsduring production.

1.2 Explanationofwarningsymbolsandnotes

Riskofelectricshock

Thissymbolindicatesariskofelectricshockfromtouchingproductpartscarrying hazardousvoltage.

Warning

This symbol is used to indicate safety instructions to draw your attention to specific hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

1.3 Packagecontents

• "PremiumAutoM120" shredder

• Theseoperatinginstructions

2.Safety

2.1 Correctuse

- This product is intended for the destruction of documents both in the home and in the commercial sector, provided the applications are comparable with typical household use (e.g. in offices, workshops and hotels, etc.).

- Usetheproductonlyfortheintendedpurpose.

- Theproductisintendedonlyforuseinsidebuildings.

- Protect the product from dirt, moisture and overheating and use it indry room only.

- Donotusetheproductintheimmediatevicinityofheaters,otherheatsourcesorindirectsunlight.

• Donotusetheproductinadampenvironmentandavoidsplashingwater.
• Do not operate the product outside the power limits specified in the technical data.
• Donotoperatetheproductcontinuously,asitisnotdesignedforthis.
• Donotusetheproductinareasinwhichelectronicproductsarenotpermitted.
• Donotdropheproductanddonotexposeittoanymajorshocks.
• Thisproductisnotintendedforusebypersons,includingchildren,withlimitedphysical,sensoryormentalabilitiesorlackinginexperienceorknowledge,unlesstheyaresupervisedbyapersonresponsiblefortheirsafetyorhavebeeninstructedonhowtousetheproduct.
• Aswithallelectricalproducts,thisdevicesshouldbekeptoutofthereachofchildren.
• Keep the packaging material out of thereach of child renduet other risk of suffocation.
• Disposeofpackagingmaterialimmediatelyinaccordancewiththelocallyapplicable regulations.
• Donotmodifytheproductinanyway.Doingsovoidsthewarranty.
• Onlyusethearticleundermoderateclimaticconditions.
• Alwayspulldirectlyontheplugwhendisconnectingthecable,neveronthecableitself.

Note

Theproductisonlyintendedforvolumesgeneratedbyhouseholds.

Warning

Anyuseispermittedonlywiththepapercontainerprovided.

Note-Commercialuse

• If the device is used commercially, increased duty of carerequirements apply.
• Therefore, please observ the accident prevention regulations of the German employer's liability insurance association for electrical systems and equipment. Please also observe all accident prevention regulations from other applicable employer's liability insurance associations and accident insurance companies, as well as any legal regulations applicable to the particular industry and/or location.

The following materials may and may NOT be shredded:

Paper	√
Paperwithstaples	√
MagneticStripandlDchipcards	√
CDs,DVDs,Blu-Rays	✕
Continuouspaper,stickylabels,slides,newspaper,cardboard,paperclips,laminate,plastic(withtheexceptionoftheobjectsstatedearlier)	✕

2.2 Basicsafetyinstructions

Pleasenotethefollowingsafetyinstructionsinordertousethedevicesafely:

• Checkthe device before use for any visible external damage. Donotputadamaged device into operation.
  • People who, as a result of their physical, mental motor capacities, are unable to operate the devices safely, must only use the device undersupervision or after instruction by a responsible person.
• Faultycomponentsmustonlybereplacedwithoriginalspareparts. Onlythesepartsare guaranteedtomeettherequiredsafetystandards.
• Protect the device against moisture and the penetration of liquids or objects. In the event of contact with liquid, disconnect the device from the powers supply immediately.

Warning-riskofcuttingonthecuttingrollers

Donottouchthecuttingrollers.

Riskofelectricshock

• Donotopenthedeviceorcontinuetooperate t ifitbecomesdamaged.
• DonotusetheproductiftheACadapter,adaptercableorpowercableisdamaged.
• Donotattempttoserviceorrepairtheproductyourself.Leaveanyandallservice worktoqualifiedexperts.

2.3 Explanation of symbols used on the product label

Warning-riskofinjury

Notethewarningsymbolsinordertoavoidinjuriesordamagetothedevice.

Generalwarningsymbol

Beforecommissioning, read the enclosed operating instructions.

You must comply with the safety instructions at all times.

- This device is not intended for use by children.

- Avoid touching the intake opening with hands, clothing or hair.

- Unplugthe device ifitis not going to be used for a prolonged period.

Childrenmustbesupervisedwhenusingthedevice.

Donotinsertpaperclipsintotheintakeshaft.

Donotreachintotheintakeshaft.

Keepclothingawayfromtheintakeshaft.

Keepjewellery, e.g. necklaces, away from the intakeshaft.

Keephairawayfromtheintakeshaft.

Donotuseanyaerosolproductsonornearthedevice.

Insertnomorethan5sheetsof paperatanyonetimeintothe manualintakeshaft(1).

DonotinsertCDs/DVDsintotheintakeshaft(1/2).

Intakeshaftforcreditcards. Onlyinsertonecreditcardata timeintotheintakeshaftforcreditcards.

Pressthepaperguideflap(6)down.

Firstloadtheunstapledsideofthepaperintotheautomatic intakeshaft(2).Maximum10sheetsstapledtogether.

Insertnomorethan120sheetsofpaperatanyonetimeinto theautomaticintakeshaft(2).

Plasticcardsmustnotbeshreddedintheautomaticintake shaft.

Donotinsertpaperclipsintotheautomaticintakeshaft.

2.4 Safetydevice

The device is equipped with safety switch and can only be operated if the basket(7) is correctly inserted into the device.

Warning

Any tampering with or modified of the safety features can result in serious injury and is not permitted.

3. Installation/Setup

Warning

- Onlyoperatetheproductfromasocketthathasbeenapprovedforthedevice.The socketmustbeinstalledclosetotheproductandmustbeasilyaccessible.

- Disconnect the product from the powersupply using the On/Off switch—if this is not available, unplug the power cord from the socket.

- Ifusingamulti-socketpowerstrip, makesurethatthetotalpowerconsumptionof allconnecteddevicesdoesnotexceedthepowerstrip'smaximumthroughputrating.

- If you will not be using the product for a prolonged period, disconnect it from mainspower.

Note

- Set the product up on a level, horizontal and sufficiently stable surface.

- Routeallcablessothatthereisnoriskoftripping

- Donotbendorcrushthecable.

- Protect the connecting cable from hot surfaces and sharpedges.

Connectthemainscabletoaproperlyinstalledandeasilyaccessiblemainssocket.

4.Operation

Note

- Beaware that the thickness of paper increases when it is folded, leading to the device's maximum page capacity being exceeded.

• Always wait until one cutting operation is finished before starting the next one.

- Donotusethedevicecontinuouslyformorethan60minutesatatime.

• Emptythecontainerregularlyinorderavoiddamagingthedevice.

4.1 Switching the device on

• Movethemainswitch(10)tothe"|"position.
• Pressthe"ON/OFF"button(13).
  • TheReadystatusLED(16)lightsupsolidgreen.
  • The device is now ready for use.

4.2 Switching the device off

• Pressthe"ON/OFF" button(13).
  •TheReadystatusLED(16)goesout.
• Movethemainswitch(10)tothe"O"position.

Note

Iftoomuchpaperisfedinatthesametime, theshredderstopsautomaticallyandejects thepaperbackwards. TheOverloadstatusLED(15)lightsupandtheReadystatusLED (16)startsflashing. Thismayhavebeencausedbytoomuchpaperbeingstapled, paper thatistoothick, foldedornotstackedneatly. Removetheexcesspaperandreducethe numberofsheetsifnecessary.

4.3 Manualintakeshaft

Shreddingpaper

• Insertthepaperintothecentreoftheintakeshaft(1).Thecuttingrollersswitchon automatically.
• Letgoofthepaper. Oncethecuttingprocessiscomplete, thecuttingrollersswitch themselvesoffagain.

Shreddingplasticcards

Note

Thisshredderisprimarilydesignedforpaper. Excessiveshreddingofplasticcardscould reducethelifeofthemachine.

• Inserttheplasticcardintothecentreoftheintakeshaft(1). Thecuttingrollerswitch onautomatically.
• Letgooftheplasticcard. Oncethecuttingprocessiscomplete, thecuttingrollersswitch themselvesoffagain.

4.4 Automaticintakeshaft(only suitable for paper)

Warning

Plasticcardsmustnotbeshreddedintheautomaticintakeshaft.

Warning

Donotloadadditionalpaperintheautomaticintakeshaftiftheshreddingprocessis alreadyinprogress.

Warning

Donotloadfoldedpaperintheautomaticintakeshaftasthismaycauseapaperjam.

Note

Itisrecommendedto remove all staples from the paper before shredding it to prolong the life of them machine. If you want to shred paper with staples, first load then on stapled side of the paper in the automatic intake. This shredder cuts a maximum of 10 stapled sheets in the automatic intake.

• Arrangethepapertobeshreddedneatlyinapile. Openthecover(3).
• Press down the centre of the paper guide flap (6) and insert the stack of paper into the automaticintake(2).
  • Makesureyoupushthepaperstackdownasfarasitwillgo.Letgoolthestackof paper.
  • Thecuttingrollersswitchonautomatically.
• Oncethecuttingprocessiscomplete, thecuttingrollerswitch themselvesoffagain.
  • Closethecover(3)topreventdamagetoit.

4.5 Forwards/backwardsmodes

Note

These modes are designed to release any blockages of the cutting mechanism.

Manualintakeshaft

Ifapaperjamisdetectedinthemanualintakeshaft, theshredderstopsautomatically andejectsthepaperbackwards(1). Ifthepaperthendoesnotcomeloose, carryoutthe followingsteps.

• Press and hold the "REVERSE" button (11). The rollers of the cutting unit now rotate in theoppositedirectionanddischargethepaperbackwards.
• Removetheblockedcutmaterialcarefullyfromtheintakeshaft(1).
  • TheReadystatusLED(16)flashes.
• Ensure that the amount of paper does not exceed the maximum capacity.
• Oncethepaperjamiscleared, pressthe"FORWARD" button(12)tocontinuethe shreddingprocess.

Automaticintakeshaft

Ifapaperjamisdetectedintheautomaticintakeshaft, theshredderstopsautomatically andejectsthepaperbackwards(2). Ifthepaperthendoesnotcomeloose, carryoutthe followingsteps.

• Press and hold the "REVERSE" button (11). The rollers of the cutting unit now rotate in theoppositedirectionanddischargethepaperbackwards.
• Pressdownthecentreofthepaperguideflap(6)andcarefullyremovethejammed paperfromtheintakeshaft(2).
  •TheReadystatusLED(16)flashes.
• Stackthepaperneatlyontopofeachother. Makesuretheamountofpaperdoesnot exceedthemaximumcapacityandstapledpaperpagesareontop.
• Oncethepaperjamiscleared, pressthe"FORWARD"button(12)tocontinuethe shreddingprocess.

5. Care and maintenance

Danger-riskofdeathfromelectricshock

Disconnect themains plug from the socket before starting any cleaning work.

Warning-riskofcuttingonthecuttingrollers

Donottouchthecuttingrollers.

Warning-damagethe device from moisture

Ensure, whencleaning, that nomoisture penetrates the device in order to avoid irreparable damagetoit.

5.1 Emptyingthecontainer

Note

TheContainerstatusLED(14)lightsupsolidredandtneshredderstopswhenthe containerisfull.

• Switch the device off - as described in 4.2 Switching the device off - and disconnect themainsplug.
  • Pullthebasket(7)out.
• Emptythecontainer.
• Pushthebasket(7)backin.
• Reconnect the device - as described in 3. Installation/Setup - to the power supply.

5.2Cleaningthedevice

• Switch the device off - as described in 4.2 Switching the device off - and disconnect themainsplug.
• Cleanthe device with adrycloth. Incases of heavy soiling, the cloth can be dampened alittle.
• Allow the device to dry completely afterwards.
• Reconnect the device - as described in 3. Installation/Setup - to the power supply.

5.3 Cleaning/oiling the cutting rollers

Note

• Oilthecuttingrollersaftereachemptyingofthewastepaperbasketinorderto prolongtheshredder'sservicelife.
• You can find an appropriate selection of cleaning products at www.hama.com.

- Switchthedeviceon-asdescribedin4.1Switchingthedeviceon.

5.3.1 CleaningwithHamacleanersforshredders(itemnumber:113820)

• ApplytheHamacleanerforshredders(itemnumber:113820)inseveralstripsontoa pieceofDINA4-sizepaper.
• Insert the paper into the centre of the intakeshaft(1). The cutting rollers switch on automatically.
• Oncethecuttingprocessiscomplete, the device is ready for operation again.

5.3.2 Cleaningwithcleaningpaper

• Insert the cleaning paper into the centre of the intakeshaft(1). The cutting rollers switch on automatically.
• Oncethecuttingprocessiscomplete, the device is ready for operation again.

6.Troubleshooting

ErrorPossiblecauseRemedy
Thecuttingrollersdonot switchonautomatically whenmaterialtobe shreddedisinserted.	Themainswitch(10)isin the"O"position.	Movethemainswitch (10)tothe"l"position.
	The"ON/OFF"button(13) wasnotpressed.	Pressthe"ON/OFF" button(13)untilthe ReadystatusLED(16) lightsupsolidgreen.
	Thecollectingcontainer (7)isnotinserted properly.	Insertthecollecting container(7)properly.
	Thepaperguideflap(6) (automaticintake)hasnot beenpresseddown.	Holddownthepaper guideflap(6)andinsert thepaperstackasfaras itwillgo.
	Theconnectingcableis notconnectedcorrectly.	Ensurethatthemains plugisinthemains socket
	ThesocketisnotliveCheckthedomesticfuses
	Thedeviceisfaulty.NotifyCustomerServices.
TheOverheating/ OverloadstatusLED(15) islitupred.	Toomuchpaperhasbeen insertedorithasbeen drawninatanangle.	Followthestepsin 4.5Forward/reverse modesandclearthe paperjam.
	Thedevicehasbecome toohot.	Switchthedeviceoffand allowittocooidownforat least60minutes.
TheContainerLED(14)is litupred.	Thecollectingcontainer (7)isfull.	Emptythecontainer (7)asdescribedin5.1 Emptyingthecontainer.
Thecuttingrollers continuetorunafterthe shreddingprocesshas beencompleted.	Thereisjammedpaperin theintakeshaft(1)/(2).	Followthestepsas describedin4.5 Forwards/backwards modes.Switchoffthe machineandcheckfor piecesofpaperstuckin theintakeshaft.

7.Technicaldata

Inputvoltage220-240V~
Mainsfrequency50Hz
Max.powerconsumption80W
Dimensions(WxHxD)37.0x52.3x26cm
Weight(net)7600g
Weight(gross)8900g
Basketcapacityforpaperandplasticcards25litres
Max.noiselevel<60dB
Max.cuttingperformance-paper(70gsm)	6sheets(DINA4paper)*manual125sheets(DINA4paper)*auto
Max.cuttingperformance-paper(80gsm)	5sheets(DINA4paper)*manual120sheets(DINA-4paper)*auto
Max.cuttingperformance-plasticcards	1
Max.cuttingspeed	1.8m/min.manual2.2m/min.auto
Max.feedwidthforpaper/plasticcards	225mm
Cuttingsizeforpaper/plasticcards	4x20mm
Max.constantoperationtime	8minutesmanual60minutesauto
Nominalrestperiod	60minutes
Protectionclass(asperDIN66399)	3
Safetylevels(asperDIN66399)	P-4/T-4/E-3

*Thickerpaper, moistureoranyvoltageotherthanthatpermittedmayreducethe performance.

8.Warrantydisclaimer

Allofthetechnicalinformation, data and instructions regarding operation contained in these operating instructions was up to date at the time of printing and disprovided based on previous experience and to the best of four knowledge.

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Maschinenaufbau

•Broyeurdedocuments"PremiumAutoM120"

86652Monheim/Germany

Service&Support

www.hama.com

[phone]

CE