WHP6011BT - Earphones THOMSON - Free user manual and instructions

USER MANUAL WHP6011BT THOMSON

1. Explanation of warning symbols and notes

Warning This symbol is used to indicate safety instructions or to draw your attention to specic hazards and risks Note This symbol is used to indicate additional information or important notes

1x "WHP6011BT" Bluetooth

• The product is intended for private, non- commercial use only

• Use the product only for the intended purpose

• Children should be supervised to ensure that they do not play with the product

• Do not use the product in areas in which electronic products are not permitted

• Do not attempt to service or repair the product yourself Leave any and all service work to qualied experts

• Do not open the device or continue to operate it if it becomes damaged

• Do not drop the product and do not expose it to any major shocks

• Dispose of packaging material immediately in accordance with the locally applicable regulations

• Do not modify the product in any way Doing so voids the warranty

• Protect the product from dirt, moisture and overheating and use it in dry environments only

• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight

• Only use the article under moderate climatic conditions

• As with all electrical products, this device should be kept out of the reach of children

• Do not operate the product outside the power limits specied in the technical data

• Do not use the product in a damp environment and avoid splashing water

• While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the trac situation and your surroundings

• The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations

• Do not incinerate the battery or the product

• Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries

• Do not use the product during the charging process! Warning – rechargeable battery

• Only use suitable charging devices or USB connections to charge the product

• Do not use defective chargers or USB ports and do not attempt to repair them

• Do not overcharge the product or allow the battery to completely discharge

• Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes)

• Charge regularly (at least quarterly) during periods of prolonged storage Warning - magnets

• This product generates magnetic elds Persons with a cardiac pacemaker should consult a doctor before using this product, as the pacemaker's proper function could be affected

• Do not store bank or similar cards with magnetic strips near the charging box or earphones The data on the cards could be damaged or completely deleted Warning - high volume

• High sound pressure!

• There is a risk of hearing damage

• To prevent any loss of hearing, avoid listening at loud volumes for prolonged periods

• Always keep the volume at a sensible level Loud volumes, even over short periods, can cause hearing loss

• Using this product limits your perception of ambient noise For this reason, do not operate any vehicles or machines while using this product5

Press the ON/OFF button (3) for around 3 seconds until a signal is heard and the LED (5)ashes blueTo switch off, press the ON/OFF button (3) for around 5 seconds until a signal is heard andthe LED (5) ashes red and then goes out zZz STANDBY 3min ON/ OFF

Note – Automatic switch-off of the headphonesThe headphones are equipped with an automatic switch-off mechanism If there is no connection toyour device within 3 minutes, they switch off automatically

Fully charge the headphones once before using them for the rst timeSwitch off the headphones and connect themEnsure that the headphones are switched off before charging themConnect the USB charging cable included to the charging socket (7) Connect the free plug on the micro-USB charging cable to a suitable USB charger To do this, consult the operating instructions for the USB charger you are using micro USB Charging process for the headphonesThe LED (5) lights up solid red during the charging processOnce the charging process is complete, the LED (5) goes outCHARGING CHARGED red 3h:00m red It can take up to 3 hours for the battery to be fully chargedBattery capacityWhen the headphone battery capacity is low, the LED (5) ashes red and a short signal is heard Note During the charging process, the Bluetooth connection is automatically disconnected

• Make sure that your Bluetooth

-capable device is switched on and that Bluetooth

• For more information, please refer to the operating instructions of your device The headphones and the device should not be more than 1 metre apart The shorter the distance, the better Switch the headphones on using the ON/OFF button (3) Check the status of the status LED (5) and the signal If the LED (5) is flashing alternately and a signal is heard: Headphones searching for a Bluetooth

connection If the LED (5) is flashing and a signal is heard: Headphones already paired with a Bluetooth

red + blue „Pairing“ 10s blue „Your device is connected“8 Search using your device for the headphones (only required on the first connection) Open the Bluetooth

settings on your device and wait until the list of found Bluetooth

devices shows WHP6011BT Select WHP6011BT and wait until the headphones are shown as connected in your device's Bluetooth

password Some devices require a password in order to connect to another Bluetooth

• If your device requests a password to connect to the headphones, enter 0000 Disconnecting the Bluetooth

connection Disconnect the headphones via your device's Bluetooth

• Please be aware that your terminal device must support some functions if they are to be used

• For more information, please refer to the operating instructions of your device

7.1 Hands-free function

It is possible to use the earphones like a hands-free facility for your mobile phone Make a call Dial the number directly via your device to make a call Accept a call

Press the multi-function button (4) once to accept an incoming call Reject a call

Press and hold the multi-function button (4) for around 2 seconds or use your device to reject an incoming call End a call

During the call, press the multi-function button (4) to end the call Last number redial

Press the multi-function button (4) twice to redial the last number called

Note Please note that this function is only possible when a Bluetooth

connection is active Start playback on your device. Play / Pause Press the multi-function button (4) once to pause or start audio playback Next track Press the + button (1) to skip to the next track Previous track Press the –button (2) to skip to the previous track

Increase volume Press the + button (1) for 2 seconds to increase the volume When the maximum volume is reached, a signal is heard Reduce volume Press the – button (2) for 2 seconds to reduce the volume Once the minimum volume is reached, a signal is heard

As an alternative to the connection via Bluetooth

, you can also connect these headphones using the included AUX cable To do this, plug one end into the device and the other end into the audio input (6) When the audio cable is inserted, the Bluetooth

connection is automatically disconnected The headphones now function like cabled headphones AUX12

technology v50 Proles A2DP/AVRCP/HFP/HSP Transmission frequency 24 – 248 GHz Rechargeable battery Li-Po 37V Battery capacity 185 mAh Power consumption Max 190 mA Charging voltage max 5 V USB Total weight 135 g Standby / music / talk time max 185 d/ 8h13

9. Care and maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents

10. Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes

11. Service and Support

Please contact Hama Product Consulting if you have any questions about this product Hotline: [phone] (German/English) Further support information can be found here: wwwhamacom

12. Recycling information

Note on environmental protection: After the implementation of the European Directives 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electrical and electronic devices as well as batteries must not be disposed of with household waste Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service lives Detailed information on this topic is dened in the national laws of the respective country This presence of the above symbol on the product, operating instructions or package indicates that the product is subject to these regulations By recycling, reusing the materials or other forms of utilising old devices/ batteries, you are making an important contribution to protecting our environment

13. Declaration of Conformity

(Pairing) Nota – Pairing