HC 100 Excellence - Hair dryer BEURER - Free user manual and instructions

USER MANUAL HC 100 Excellence BEURER

tions for use accessible to other users. If the device is passed on, provide the instructions for use to the next user as well.

1. Included in delivery ...................................17

2. Signs and symbols ....................................17

3. Warnings and safety notes ........................ 19

Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are present. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address.

• 1 professional nozzle

• 1 copy of these instructions for use

2. SIGNS AND SYMBOLS

The following symbols are used on the device, in these instructions for use, on the packaging and on the type plate for the device: DANGER Indicates an imminent danger. If it is not avoided, it will result in death or serious injury. WARNING Indicates a potentially impending danger. If it is not avoided, there is a risk of death or serious injury. CAUTION Indicates a potentially impending danger. If it is not avoided, slight or minor injuries may result.18 NOTICE Indicates a potentially harmful situation. If it is not avoided, the system or something in its vicinity may be damaged. Danger This device must not be used near water or in water (e.g. in a wash basin, or in the shower or bath) – risk of electric shock!

Marking to identify the packaging material. A = material abbreviation, B = material number: 1–7 = plastics, 20–22 = paper and cardboard Read the instructions Product information Note on important information Disposal in accordance with the Waste Electrical and Electronic Equipment EC Directive – WEEE CE labelling This product satisfies the requirements of the applicable European and national directives. Do not dispose of batteries containing harmful substances with household waste Conformity assessed marking for the United Kingdom Manufacturer Importer symbol19 The products demonstrably meet the requirements of the Technical Regulations of the EAEU Separate the product and packaging elements and dispose of them in accordance with local regulations. Do not wind the cable around the device Protection class II device The device is double-insulated and, therefore, is in protection class 2

• The device must only be used for the purpose for which it was designed and in the manner specified in these instructions for use.

• This device may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills, or a lack of experience and/or knowledge, provided that they are supervised or have been instructed on how to use the device safely, and have understood the risks involved.

• Children must not play with the device.

• Danger of suocation! Keep packaging materials away from children.20

• Cleaning and user maintenance must not be performed by children unless supervised.

• This device is intended for use in commercial and private environments.

• When the device is in operation, only hold it by the handle (13).

• If the device is not used in the manner specified by the manufacturer, safety cannot be guaranteed.

• Do not cover the dryer with towels or other objects while it is in operation or still hot.

• The air supply must not be obstructed during use. Regularly check that it is clean and free of hair. DANGER

• Do not use this device near bathtubs, shower trays or other containers which have water in them.

• Risk of electric shock! Never submerge the device in water or other liquids! If the device falls into water, do not reach into the water! First switch o the fuse at the fuse box and then pull the mains plug out of the socket.

• Never touch the device with wet or damp hands or feet.21

• If using the hair dryer in the bathroom, unplug it after use – this is because proximity to water constitutes a danger even when the hair dryer is switched o.

• As an additional safety measure, the installation in the bathroom circuit of a residual current device (FI/RCD) with a rated tripping current not exceeding 30 mA is recommended. Ask your installer for advice. WARNING

• Before use, always check whether the voltage of your mains network matches the voltage required for the hair dryer.

• If the mains connection cable of this device is damaged, it must be replaced by the manufacturer, its customer service department or a similarly qualified person to avoid any risk. Do not use the device if it is damaged or not functioning correctly.

around the hair dryer!

• Do not use extension cables.

• Always prevent the cable from coming into contact with hot surfaces.22

• Risk of fire! Ensure that the air outlet opening

and the removable filter

• Risk of burns and fire! The diuser

, the professional nozzle

and the hair dryer may become very hot depending on the switch setting and period of use.

• Keep the hot device away from easily damaged surfaces and the skin.

and the professional nozzle

during use, as they will heat up.

• The device must not be connected to the mains when performing maintenance work and exchanging the nozzle and diuser.

• Never use the cable to pull the plug out of the socket.

4. DEVICE DESCRIPTION

The associated drawings are shown on page 3.

Hair dryer holding position

Wash hair as usual and then dry with a towel. Hairsprays contain flammable substances, so do not use hairspray while using the device.

2. Stand on a dry, non-conductive surface and make sure your hands

3. To switch on the hair dryer, slide the ON/OFF switch

I. The hair dryer displays the warm air and blower settings that were

to set the desired temperature setting. The warm air indicator

shows the current setting in colour. One red LED = warm air Two red LEDs = very warm air Three red LEDs = hot air Alternatively, press and hold the cold air button

to use the cold air setting. The warm air indicator

to set the desired setting. The blower indicator

shows the current setting in colour. One white LED = low blower setting Two white LEDs = medium blower setting Three white LEDs = high blower setting

6. Dry and/or style your hair as you wish.

Switch o the hair dryer after each use or upon interruption. To switch o the hair dryer, slide the ON/OFF switch

down to setting 0. The warm air indicator

and the blower indicator

8. Do not leave the hair dryer unattended while in use.

9. Remove the mains plug from the socket.

10. Allow the hair dryer to cool completely on a fireproof surface.

11. Then store the device in the sales packaging.24

6. CLEANING AND MAINTENANCE

As soon as the hair dryer has reached 900 minutes of use, the three LEDs of the blower indicator

flash simultaneously. This indicates that you need to clean the hair dryer. The LEDs of the blower indicator

flash six times and then return to normal operation.

1. Disconnect the mains plug and leave the device to cool.

2. Never store a hot device that is still plugged in.

o horizontally (see figure

Remove the inner filter from the outer filter using the metal handle (see figure

). The accumulated dust and lint can be removed by hand. The outer filter can be cleaned with a slightly damp cloth. Dry the clean outer filter completely with a cloth.

5. Clean the inner filter with a soft, slightly damp cloth. Then allow the

inner filter to dry completely.

6. Put the inner filter back in the outer filter.

back on the device horizontally until it clicks into place.

For environmental reasons, do not dispose of the device in household waste at the end of its service life. Dispose of the device at a suitable local collection or recycling point in your country. Observe the local regulations for material disposal. Dispose of the device in accordance with EC Directive Waste Electrical and Electronic Equipment (WEEE). If you have any questions, please contact the local authorities responsible for waste disposal. You can obtain the location of collection points for old devices from the local or municipal authorities, local waste disposal companies or your retailer, for example.25

8. TECHNICAL SPECIFICATIONS

Weight: Approx. 599 g Voltage supply: 220-240 V~, 50-60 Hz Power consumption: 1500-1700 W Protection class: II Ambient conditions: Only approved for indoor use Permissible temperature range: -10 to +40°C Subject to technical changes. The average sound pressure level is 60 dB(A). The sound pressure level does not exceed 70 dB(A). Information according to the Machinery Directive 2006/42/EC Vibration total value to which the hand-arm system is subjected ≤ 2.5m/s² Measured maximum vibration total value including uncertainty of measurement.

9. EU DECLARATION OF CONFORMITY

Beurer hair dryer Type: HC 100 The aforementioned product complies with the provisions of the follow

VEILIGHEIDSRICHTLIJNEN WAARSCHUWING