SimpliGlide 300 - Lawn mower FLYMO - Free user manual and instructions
Find the device manual for free SimpliGlide 300 FLYMO in PDF.
| Product Type | Hover electric mower |
| Brand | Flymo |
| Model | SimpliGlide 300 |
| Cutting width | 30 cm |
| Cutting height adjustment | 4 positions, from 10 to 30 mm |
| Rated power | 1700 W |
| Supply voltage | 230 V / 50 Hz |
| Blade rotation speed | 4200 rpm |
| Weight | 6.7 kg |
| Sound pressure level (LpA) | 83 dB(A) (uncertainty 3.0 dB) |
| Sound power level (LwA) measured/guaranteed | 92 / 93 dB(A) (uncertainty 1.0 dB) |
| Hand-arm vibration (ah) | < 2.5 m/s² (uncertainty 1.5 m/s²) |
| Safety device | Double safety (start lever and locking) |
| Power supply | Electric with cord (external extension) |
| Recommended cable type | Outdoor extension cord, minimum cross-section 1.0 mm² up to 40 m |
| Main function | Lawn mowing for private gardens |
| Maintenance | Clean after use, no water or solvents |
| Storage | Frost-free, dry, two positions (lying down or against wall) |
| Warranty | 2 years (manufacturer) |
| Spare parts | Replacement blade FLYMO FLY094 (30 cm) |
Frequently Asked Questions - SimpliGlide 300 FLYMO
User questions about SimpliGlide 300 FLYMO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Lawn mower in PDF format for free! Find your manual SimpliGlide 300 - FLYMO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SimpliGlide 300 by FLYMO.
USER MANUAL SimpliGlide 300 FLYMO
natural_image
Line drawing of a lawn mower with handle and frame (no text or symbols)en Operator's manual
Electric Hover Lawnmower
Remark: "xx" stands for customer and country variants.
The basic product number is before the hyphen.
cs Návod k obsluze
Original instructions.
This product may be used under supervision, or if instruction regarding the safe use of the product has been provided and the resulting dangers have been understood, by children aged 8 and above, as well as by persons with physical, sensory or mental disabilities or a lack of experience and knowledge. Children must not be allowed to play with the product. Cleaning and user maintenance must not be performed by children without supervision. The use of this product by young people under the age of 16 is not recommended.
Intended use:
The FLYMO Lawnmower is intended to mow lawn in private domestic gardens and allotments.
The product is not intended for long term use.
DANGER! Risk of injury!
→ Do not use the product to cut bushes, hedges, shrubs, to cut of climbers or grass on roofs or balcony boxes, to chop up branches, twigs and to level irregularities in the soil. Do not use the product on a slope steeper than 20^ maximum.
1. SAFETY
IMPORTANT!
Read the operator's manual carefully before use and keep for future reference.
Symbols on the product:
Beware of sharp blades. Blades continue to rotate after the motor is switched off. Remove plug from mains before maintenance or if cord is damaged.
Keep the mains cable away from the cutting blades.
General safety warnings
Electrical safety
DANGER! Electric shock!
Risk of injury due to electric shock.
→ The product must be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA.
WARNING! Risk of physical injury!
Cut injury when the blade turns or the product starts accidentally.
→ Disconnect the product from the mains before you do maintenance or you replace parts. Thereby the disconnected socket must be in the visual range.
Cables
If extension cables are used, these must comply with the minimum cross-sections in the table below:
Voltage Cable length Cross section
| 220 – 240 V / 50 Hz Up to 40 m | 1.0 mm ^2 |
| 220 – 240 V / 50 Hz Up to 60 m | 1.5 mm ^2 |
| 220 – 240 V / 50 Hz Up to 100 m | 2.5 mm ^2 |
Minimum rating: 1.0 mm ^2 size cable, 10 amps 250 volts AC.
Your product is supplied with cable wired directly into the product.
- If the supply cord is damaged, it must be replaced by your local Husqvarna UK Ltd. Approved Service Centre or similarly qualified persons in order to avoid a hazard.
- Do not wire an extension cable directly to your product yourself. Please contact your local Husqvarna UK Ltd. Approved Service Centre for further information on the connectors and kits available.
- Only use extension cables specifically designed for outdoor use and which conform to one of the following specifications: Ordinary rubber (60245 IEC 53), Ordinary PVC (60227 IEC 53) or Ordinary PCP (60245 IEC 57).
Training
a) Read the instructions carefully. Be familiar with the controls and the correct use of the machine.
b) Never allow children or people unfamiliar with these instructions to use the machine. Local regulations can restrict the age of the operator.
c) Never operate the machine while people, especially children, or pets are nearby.
d) Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
Preparation
a) While operating the machine always wear substantial footwear and long trousers. Do not operate the machine when barefoot or wearing open sandals. Avoid wearing clothing that is loose fitting or that hanging cords or ties.
b) Thoroughly inspect the area where the machine is to be used and remove all objects which can be thrown by the machine.
c) Before using, always visually inspect to see that the blade, blade bolt and the blade assembly are not worn or damaged. Replace worn or damaged components in set to preserve balance. Replace damaged or unreadable labels.
d) Before use check the supply and extension cord for signs of damage or aging. If the cord becomes damaged during use, disconnect the cord from the supply immediately.
DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the machine if the cord is damaged or worn.
Operation
a) Operate the machine only in daylight or in good artificial light.
b) Avoid operating the machine in wet grass.
c) Always be sure of your footing on slopes.
d) Walk, never run
e) Mow across the face of slopes, never up and down.
f) Exercise extreme caution when changing direction on slopes.
g) Do not mow excessively steep slopes.
h) Use extreme caution when reversing or pulling the machine towards you.
i) Stop the blade(s) if the machine has to be tilted for transportation when crossing surfaces other than grass, and when transporting the machine to and from area to be used.
j) Never operate the machine with defective guards or shields, or without safety devices, for example deflectors and/or grass collector, in place.
k) Switch on the motor carefully according to instructions and with feet well away from the blade(s).
Do not tilt the machine when switching on the motor, except if the machine has to be tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the part, which is away from the operator.
m) Do not start the machine when standing in front of the discharge opening.
n) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
o) Do not transport the machine while the power source is running.
p_i Stop the machine, and remove plug from the socket. Make sure that all moving parts have come to a complete stop.
- whenever you leave the machine,
– before clearing blockages or unclogging chute,
- before checking, cleaning or working on the machine,
- after striking a foreign object. Inspect the machine for damage and make repairs before restarting and operating the machine;
if the machine starts to vibrate abnormally (check immediately)
- inspect for damage,
- replace or repair any damaged parts,
- check for and tighten any loose parts.
Maintenance and storage
a) Keep all nuts, bolts, and screws tight to be sure the machine is in safe working condition.
b) Check the grass collector frequently for wear or deterioration.
c) Replace worn or damaged parts for safety.
d) On machines with multi blade, take care as rotating one blade can cause other blades rotate.
e) Be careful during adjustment of the machine to prevent entrapment of the fingers between moving blades and fixed parts of the machine.
f) Always allow the machine to cool down before storing.
g) When servicing the blades be aware that, even though the power source is switched off, the blades can still be moved.
h) Use only genuine replacement parts and accessories.
Additional safety warnings
Electrical safety
DANGER! Cardiac arrest!
This product makes an electromagnetic field while it operates. This field may under some conditions interfere with active or passive medical implants. To decrease the risk of conditions that can possibly injure or kill, we recommend persons with medical implants to speak with their physician and the medical Implant manufacturer before you operate the product.
Before use, examine the cable for signs of damage or ageing. If the cable is found to be defective, take the product to an authorised Service Centre and have the cable replaced.
Do not use the product if the electric cables are damaged or worn.
Immediately disconnect from the mains if the cable is cut, or the insulation is damaged. Do not touch the electric cable until the cable has been disconnected. Do not repair a cut or damaged cable. Replace it with a new one.
The extension cable must be uncoiled. Coiled cables can overheat and reduce the efficiency of your mower.
Keep the extension cable away from product, always work away from the power point mowing up and down, never in circles.
Do not pull cable around sharp objects.
Always switch off at the mains before disconnecting any plug, cable connector or extension cable.
Stop the motor, disconnect the mains and examine the cable for damage or ageing before you wind the cable for storage. Do not repair a damaged cable, replace it with a new one. Use only genuine replacement cable.
Always wind the cable carefully, avoid kinking.
Do not carry the product by the cable.
Do not pull on the cable to disconnect any of the plugs.
Use only on AC mains supply voltage shown on the product rating label.
Our products are double insulated to EN60335. Do not connect an earth to any part of the product.
Check the working area for hidden cables.
Do not use for pond care or close to water.
Personal safety
DANGER! Risk of suffocation!
Small parts can be easily swallowed. There is also a risk that the poly-bag can suffocate toddlers. Keep toddlers away when you assemble the product.
Let the hover mower to cool down for at least 30 minutes before storage or maintenance.
If blockage of cutting element stop product and check.
Do not tilt the machine into the direction of the user.
Do not move backwards.
Stay alert during operation.
Do not use in explosive atmosphere.
Do not operate the product when you are tired, ill or under the influence of alcohol, drugs or medicine or when you are exhausted.
Do not overload the mower.
Use gloves, wear slip resistant shoes and wear eye protection.
Do not use under wet conditions.
Do not use on wet grass.
Do not disassemble the product further than the delivery status.
Only start the mower with an upright standing handle.
Do not use the start levers alternately.
Use the handles carefully.
Safety Cut-Out
The motor is protected by a Safety Cut-Out which is activated when the blade becomes jammed or if the motor is overloaded. When this occurs, stop and disconnect the product from the mains. The Safety Cut-Out will only reset when you release the start / stop lever. Clear any obstruction and wait for a few minutes for the Safety Cut-Out to reset before you continue to use the product.
2. ASSEMBLY
DANGER! Risk of injury!
injury when the product starts accidentally.
→ Wait for the blade to stop, disconnect the product from the mains and use gloves before you assemble the product.
To assemble the lower handle [Fig. A1]:
- Place the end of the lower handle ① into the slots on the deck ②.
-
Secure the lower handles ① to the deck ② by firmly pushing fixing pin ③ through the holes in the deck ② and handle ①.
-
Repeat on the other side.
NOTE: Should a problem occur when securing the handle to the deck with the fixing pin, carefully lever fixing pin out of location and repeat steps 1 to 3 above.
To assemble the upper handle [Fig. A2 / A3]:
- Make sure that the upper handle ④ is located correctly with the safety lock-off button ⑤ on the switchbox facing upwards.
- Make sure that the upper handle ④ and the lower handle ① are aligned correctly.
- Insert the nut into the handle knob ⑥ (if necessary).
- Fit the bolts ⑧, the washers ⑦ and the handle knobs ⑧ onto the handles ①/④ in the correct positions.
- Attach the cable ⑨ to the handles ①/④ with the clips ⑩ provided. Make sure that the cable ⑨ is not trapped between the upper handle ④ and lower handle ①.
3. OPERATION
DANGER! Risk of injury!
injury when the product starts accidentally.
→ Wait for the blade to stop, disconnect the product from the mains and use gloves before you adjust or transport theproduct.
To connect the mower [Fig. 01 / 02]:
DANGER! Electric shock!
avoid damage to the extension cable ⑪, the extension
cable ^⑪ must be inserted into the cable lock ①.
→ Before you operate insert the extension cable ^11 into the cable lock ^11 .
- Connect the female extension cable ⑪ connector to the back of the switchbox ⑫.
- Form a loop in the extension cable ⑪, insert the loop into the cable lock ① slot in the switchbox ⑫ and pull tight.
- Connect the extension cable ⑪ into a 230 V mains socket.
To adjust the cutting height [Fig. 03/04/05]:
![FLYMO SimpliGlide 300 - To adjust the cutting height [Fig. 03/04/05]: - 1](/content/2026/04/604054/images/ec8f9eb289fc0d76248f5d8d7b345fb05690e9d5727a3a72bf9fa947ee1b58dd.jpg)
VITION! Do not use more than 3 cutting height
spacers ⑬. The cutting height spacers ⑬ must only be fitted between the blade ⑭ and the fan ⑮. Do not fit the cutting height spacers ⑱ between the blade ⑭ and the blade bolt ⑯.
- To remove the blade bolt ⑯, hold the fan ⑮ firmly and loosen the blade bolt ⑯ with the spanner ⑰ provided.
- Remove the blade bolt ⑯, the blade ⑭, the cutting height spacers ⑬ and the fan ⑮.
- Inspect for damage and clean as necessary.
- Put the fan ⑮ on the product. Make sure that the fan ⑯ is fully in place and the hole of the fan is inline up with the threaded hole.
- Put the cutting height spacers ⑱ onto the fan ⑮.
Higher Cut - less cutting height spacers
Lower Cut - more cutting height spacers
Make sure that the pegs have located into the holes. - Put the blade ⑭ on by aligning the D-shaped holes onto the cutting height spacers ⑬.
Make sure that the pegs have located into the holes on the blade. -
Put the blade bolt ⑯ through the centre hole of the blade ⑭.
-
Tighten down the blade bolt ⑯ clockwise by hand.
- Hold the fan ⑮ firmly and tighten the blade bolt ⑯ with the spanner ⑰ provided.
Operation position:
Adjustment is not required to move the handle to the operating position. Simply pull down from the forward position or lift up from the down position until the handle is in the most comfortable operating position.
To start the mower [Fig. 06 / 07]:
![FLYMO SimpliGlide 300 - To start the mower [Fig. 06 / 07]: - 1](/content/2026/04/604054/images/261e7ec494d07ff9d1344a0975fc1a1590c555d179f803d8bd26b1efbf94fad9.jpg)
NGER! Risk of injury!
of injury if the product does not stop when you release the start levers.
→ Do not bypass the safety devices or switches. For example do not attach the start levers to the handle.
To start:
The product is provided with a two-handed safety device (start lever ⑩ and safety lock-off button ⑤) to prevent the product from being turned on by accident.
There are two start levers Ⓤ fitted. Either one has to be used to start.
- Push the safety lock-off button ⑤ with one hand and pull the start lever ⑯ with the other hand. The mower starts.
- Release the safety lock-off button ⑤.
To prevent a ring being cut in the lawn and to clear any residual grass, tilt the mower slightly. When the lawnmower has reached full speed gently lower it onto the lawn.
To stop:
→ Release the start lever ^⑩ . The mower stops.
Tips to use the mower [Fig. 08]:
Mow twice a week during the growing season.
The lawn will suffer if more than a third of its length is cut at one time.
For the best results mow the outside edge of the lawn in a clockwise direction first.
Start to mow the edge of the lawn nearest to the power point. So the cable is laid out on the lawn you have already cut.
For the best cutting results mow in straight lines with an overlap of approximately 8 – 10 cm on each pass with the mower.
Do not overload the mower. To mow long thick grass may cause the motor speed to drop and you will hear a change in the motor sound. If the motor speed drops you may overload the mower which may cause damage. When you mow in long thick grass a first cut with the cutting height set higher will help reduce the load.
See To adjust the cutting height.
4. MAINTENANCE
DANGER! Risk of injury!
injury when the product starts accidentally.
→ Wait for the blade to stop, disconnect the product from the mains and use gloves before you maintain the product.
To clean the mower:
DANGER! Risk of injury!
of injury and risk of damage to the product.
→ Do not clean the product with water or with a water jet (in particular high-pressure water jet).
→ Do not clean with chemicals including petrol or solvents. Some can destroy critical plastic parts.
The airflow slots must always be clean.
To clean the underside of the mower [Fig. M1]:
The underside is easiest to clean after you mowed.
- Lay the mower on its side carefully.
- Clean the underside ⑯ by removing any grass build up with the spanner/scraper tool ⑰.
- Clean the blade ⑭ and the fan ⑮ with a soft brush (do not use sharp objects).
To clean the outside of the mower [Fig. M2]:
- Clean the outside with a dry cloth.
- Clean the airflow slots ⑳ with a soft brush (do not use sharp objects).
5. STORAGE
To put into storage:
The product must be stored away from children.
- Disconnect the product from the mains.
- Clean the mower (see 4. MAINTENANCE).
- Store the mower in a dry, enclosed and frost-free place.
Storage positions:
There are two kinds of storing the mower:
- Lying storage position [Fig. S4]
– Wall-mounting storage position [Fig. S5]
NOTE: When wall-mounting storage, always hang the mower from the lower handle ① cross section.
To fold the handle [Fig. S1/S2/S3/S4/S5]:
- Lift up and support the handles ①/④ by approximately 5 cm.
- To unlock, push the lower handle ① inwards from both sides simultaneously.
- For the lying storage position: Rotate the handles ①/④ forwards. Or:
For the wall-mounting storage position: Rotate the handles ①/④ backwards.
- Loosen the handle knobs ⑥ and fold the upper handle ④ Make sure that the cable is not locked between the lower and the upper handle.
6. TROUBLESHOOTING
IGER! Risk of injury!
injury when the product starts accidentally.
→ Wait for the blade to stop, disconnect the product from the mains and use gloves before you troubleshoot the product.
To replace the blade:
IGER! Risk of injury!
injury when the blade turns and it is damaged, bent, out of balance or has chipped edges.
→ Do not use the mower when the blade is damaged, bent, out of balance or has chipped edges.
→ Do not regrind the blade.
The FLYMO spare parts are available from your FLYMO dealer or from the FLYMO service.
Only use an original FLYMO blade:
FLYMO Replacement Blade for 30 cm:
Reference no. FLY094 Part no. 529370590
FLYMO Replacement Blade for 33 cm:
Reference no. FLY095 Part no. 529370790
FLYMO Replacement Blade for 36 cm:
Reference no. FLY096 Part no. 529370890
→ Replace the blade (see 3. OPERATION To adjust the cutting height).
Problem Possible Cause Remedy
| Mower does not start Mains cable is discon nected or damaged. | → Connect the mains cable or if necessary replace it. | |
| Motor is jammed and makes a noise | Motor is blocked. | → Remove the obstacle. |
| Cutting height is too low. | → Raise the cutting height. | |
| Loud noises, the mower is rattling | Screws on motor, its fixing or on the mower chasing are loose. | → Let the screws be tightened by an authorised specialist dealer. |
Problem Possible Cause Remedy
| Mower runs unevenly or vibrates strongly | Blade is damaged / worn or the blade mounting is released. → Replace the blade. | |
| Blade is very dirty. → Clean the mower(see 4. MAINTENANCE).If this does not rectify the problem, replace the blade. | ||
| Lawn is not cleanly mowed | Blade is blunt or damaged. → Replace the blade. | |
| Cutting height is too low. → Raise the cutting height. | ||
| Poor flotation Underside of the mower is dirty. → Clean the underside of the mower. | ||
For any other malfunctions please contact the Husqvarna UK Ltd. Customer Service. Repairs must only be done by Husqvarna UK Ltd. service departments or specialist dealers approved by FLYMO.
- TECHNICAL DATA
| Electric Hover Lawnmower | Unit Value | 9704825-xx (30 cm) | Value 9704828-xx (33 cm) | Value 9704829-xx (36 cm) |
| Rated power W 1700 1700 1800 | ||||
| Mains voltage | V | 230 | 230 | 230 |
| Mains frequency | Hz | 50 | 50 | 50 |
| Speed of rotation cutting blade | R/min 4200 4200 4200 | |||
| Cutting width | cm | 30 | 33 | 36 |
| Cutting height adjustment (4 positions) | mm | 10 – 30 | 10 – 30 | 10 – 30 |
| Weight | kg | 6.7 | 6.7 | 6.9 |
| Sound pressure level L_pa^1) Uncertainty k_pA | dB (A) | 833.0 | 833.0 | 803.0 |
| Sound power level L_WA^2i : measured/guaranteed Uncertainty k_WA | dB (A) | 92 / 931.0 | 91 / 910.3 | 91 / 932.0 |
| Hand/arm vibration a_vsw^1) Uncertainty k_vsw | m/s ^2 | < 2.51.5 | < 2.51.5 | < 2.51.5 |
Measuring process complying with: ^1 EN 60335-2-77 ^2 RL 2000/14/EC / S.I. 2001 No.1701
NOTE: The stated vibration emission value has been measured according to a standardised test procedure and can be used for comparison of one electric power tool with another. It can also be used for preliminary evaluation of expo-vibration emission value can vary during actual use of the electric power tool.
Please consult the supply authority, if necessary, that the equipment is connected only to a supply of an impedance no more than 0.354 Ω. This maximum permissible system impedance at the interface point of the user's supply is according to the test value of SimpliGlide 360V.
- ACCESSORIES
| FLYMO Replacement Blade for 30 cm | As replacement for blunt blade. | Reference no. FLY094 Part no. 529370590 |
| FLYMO Replacement Blade for 33 cm | As replacement for blunt blade. | Reference no. FLY095 Part no. 529370790 |
| FLYMO Replacement Blade for 36 cm | As replacement for blunt blade. | Reference no. FLY096 Part no. 529370890 |
9. SERVICE/WARRANTY
Service:
Please contact the address on the back page.
Warranty statement:
In the event of a warranty claim, no charge is levied to you for the services provided.
Husqvama UK Ltd. grants a warranty for all original FLYMO new products for two years from the date of original purchase from the retailer, pro-
vided that the devices have been for private use only. This manufacturer's warranty does not apply to products acquired second hand. This warranty includes all significant defects of the product that can be proved to be material or manufacturing faults. This warranty is fulfilled by supplying a fully functional replacement product or by repairing the faulty product sent to us free of charge; we reserve the right to choose between these options. This service is subject to the following provisions:
- The product has been used for its intended purpose as per the recommendations in the operating instructions.
- Neither the purchaser nor a third party has attempted to open or repair the product.
- Only Original FLYMO replacement parts and wear parts have been used for operation.
- Presentation of the receipt.
Normal wear and tear of parts and components (such as blades, blade fixing parts, turbines, light bulbs, V-belts/toothed belts, impellers, air filters, spark plugs), visual changes, wear parts and consumables are excluded from the warranty.
This manufacturer's warranty is limited to replacement and repair of products in accordance with the abovementioned conditions. The manufacturer's warranty does not constitute an entitlement to lodge other claims against us as a manufacturer, such as for damages. This manufacturer's warranty does not, of course, affect statutory and contractual warranty claims against the dealer/retailer.
The manufacturer's warranty is governed by the law of the Federal Republic of Germany.
In case of a warranty claim, please return the faulty product, together with a copy of the receipt and a description of the fault, with postage paid to the service address.
Consumables:
The blade is a consumable and is not included in the warranty.
10. DISPOSAL
Disposal of the mower:
(according to Directive 2012/19/EU/S.I. 2013 No. 3113)
The product must not be disposed of to normal household waste. It must be disposed of in line with local environmental regulations.
IMPORTANT!
→ Dispose of the product through or via your municipal recycling collection centre.
WAARSCHUWING! Verwondingsgevaar!
FARE! Fare for kvelning!
10. CÓMO ELIMINAR EL PRODUCTO USADO
Mjemi postupak prema: ^1 EN 60335-2-77 ^2 RL 2000/14/EC / S.I. 2001 No.1701
Procedura de măsurare conform: 1) EN 60335-2-77 2) RL 2000/14/EC / S.I. 2001 No.1701
Matavimo metodai pagal: ^11 EN 60335-2-77 ^21 RL 2000/14/EC / S.I. 2001 No.1701
| en UKCA Declaration of ConformityThe manufacturer: Husqvarna AB SE 561 82 Huskvarna, Sweden hereby certifies, when leaving our factory, the unit(s) indicated below is/are in accordance with the UK Regulations, designated standards of safety and product specific designated standards. This certificate becomes void if the units are modified without our approval. | |
| Description of the product: | Mower SimpliGlide |
| Product type: | 300330360 |
| Article number: | 9704825-xx9704828-xx9704829-xx |
| UK regulations: | S.I. 2008/1597S.I. 2016/1091S.I. 2012/3032S.I. 2001/1701 |
| Designated standards: | EN ISO 12100EN 60335-1EN 60335-2-77 |
| Authorised representative: | Husqvarna UK Limited |
| Deposited documentation: | Preston Road,Aycliffe,County DurhamUKDL5 6 UP |
| Noise level: | Art. 9704825-xx: 92 dB(A) / 93 dB(A)Art. 9704828-xx: 91 dB(A) / 91 dB(A)Art. 9704829-xx: 92 dB(A) / 93 dB(A) |
| Conformity assessment according to: | S.I. 2001/1701 Art, 11 Schedule 9 |
| Aycliffe, 10.09.2021Authorised representative: | John ThompsonDirector |
(C1428ARP) Buenos Aires
Phone: (+54) 11 5194 5000
info.gardena@ar.husqvarna.com
Armenia
Garden Land Ltd.
61 Tigran Mets
0005 Yerevan
Australia
Husqvarna Australia Pty. Ltd.
Locked Bag 5
Central Coast BC
NSW 2252
Phone: (+ 61) (0) 2 4352 7400
customer.service@
husqvarna.com.au
Brampton, Ontario L6T 4X3
Phone: (+1) 905 792 93 30
info@gardenacanada.com
Chile
Maquinarias Agroforestales
Ltda. (Maga Ltda.)
Santiago, Chile
Avda. Chesterton
# 8355 comuna Las Condes
Phone: (+56) 2 202 4417
Dalton@maga.cl
Zipcode: 7560330
China
Husqvarna (China) Machinery
Manufacturing Co., Ltd
No. 1355, Jia Xin Rd.,
Ma Lu Zhen, Jia Ding Dist.,
Shanghai
201801
Phone: (+86) 21 59159629
Domestic Sales
www.gardena.com.cn
Colombia
Husqvarna Colombia S.A.
Calle 18 No. 68 D-31, zona
Industrial de Montevideo
Bogotá, Cundinamarca
Tel. 571 2922700 ext. 105
jairo.salazar@husqvarna.com.co
Costa Rica
Compania Exim
Euroiberoamericana S.A.
Los Colegios, Moravia,
Saint Francis – San J
Phone: (+506) 297 68 83
exim_euro@racsa.co.cn
Croatia
SILK ADRIA d.o.o
Josipa Lončara 3
10090 Zagreb
Phone: (+385) 1 3794 580
silk.adrla@zg.t-com.hr
Cyprus
Med Marketing
17 Digeni Akrita Ave
P.O. Box 27017
1641 Nicosia
Czech Republic
Importer to Great Britain
Husqvarna UK Ltd
Preston Road
Aycliffe Industrial Park
Newton Aycliffe
County Durham
DL5 6UP
Phone:+44 (0) 344 8444558
customer.services@
husqvarna.co.uk
Greece
Π.ΠΑΠΑΔΟΠΟΥΛΟΣ ΑΕΒΕ
Λεωφ. Αθηνών 92
Αθήνα
TK.10 4 42
Ελλάδα
Tηλ. (+30) 210 5193100
info@papadopoulos.com.gr
Hungary
Aycliffe Industrial Park
Newton Aycliffe
County Durham
DL5 6UP
info.gardena@husqvarna.co.uk
Italy
Husqvarna Italia S.p.A.
Via Santa Vecchia 15
23868 VALMADRERA (LC)
Phone: (+39) 0341.203.111
assistenza.italia@it.husqvarna.com
Japan
KAKUICHI Co. Ltd.
Sumitomo Realty &
Development Kojimachi
BLDG., 8F
5 -1 Nibanncyo
Chiyoda-ku
Tokyo 102-0084
Phone: (+81) 33 264 4721
m ishihara@kaku-ichi.co.jp
Kazakhstan
LAMED Ltd
155/1, Tazhibayevoi Str.
050060 Almaty
IP Schmidt
Abayavenue 3B
110 005 Kostanay
Korea
Kyung Jin Trading CO.,LTD.
107-4, SunDuk Bld.,
YangJae-dong,
Seocho-gu,
Seoul, (zipcode: 137-891)
Phone: (+82) (0)2 574-6300
Kyrgyzstan
Alye Maki
av. Moladaya Guardir J 3
720014
Bishkek
Latvia
Husqvarna Latvija SIA
Gardena Division
Ulbrokas 19A
LV-1021 Riga
info@gardena.lv
Lithuania
UAB Husqvarna Lietuva
Gardena Division
Ateities pl. 77C
LT-52104 Kaunas
info@gardena.lt
Luxembourg
Magasins Jules Neuberg
- rue Jacques Stas
Luxembourg-Gasperlich 2549
Case Postale No. 12
Luxembourg 2010
Phone: (+352) 40 14 01
api@neuberg.lu
Mexico
AFOSA
Zapopan, Jalisco, Mexico
Phone: (+52) 33 3818-3434
Husqvarna New Zealand Ltd.
PO Box 76-437
Manukau City 2241
Phone: (+64) (0) 9 9202410
support.nz@husqvarna.co.nz
Norway
Husqvarna Norge AS
Gardena Division
Trøskenveien 36
1708 Sarpsborg
Tel: 69 10 47 00