Q: How to clean the air vents of the SimpliGlide 330?

The air vents of your SimpliGlide 330 must always be clean to ensure proper cooling of the motor and optimal performance. The best time to clean is right after mowing, when the grass clippings are still fresh. Before any intervention: wait for the blade to come to a complete stop, unplug the mower from the power supply, and put on work gloves for your safety. Cleaning the underside of the mower: Gently tip the mower on its side Remove the accumulated grass clippings using the provided wrench or scraper Clean the blade and the aerator with a soft brush Never use sharp or pointed objects that could damage them Cleaning the top of the mower: Wipe the top with a dry cloth Use a brush to clean the air flow slots and the fan Do not use sharp objects Prohibited products: never use water, water jets (especially high pressure), or chemicals, gasoline, or solvents. These elements can destroy important plastic parts. Regular maintenance of the air vents ensures a longer lifespan and reliable performance of your mower.

Question 1

How to clean the air vents of the SimpliGlide 330?

Accepted Answer

The air vents of your SimpliGlide 330 must always be clean to ensure proper cooling of the motor and optimal performance. The best time to clean is right after mowing, when the grass clippings are still fresh.

Before any intervention: wait for the blade to come to a complete stop, unplug the mower from the power supply, and put on work gloves for your safety.

Cleaning the underside of the mower:

Gently tip the mower on its side
Remove the accumulated grass clippings using the provided wrench or scraper
Clean the blade and the aerator with a soft brush
Never use sharp or pointed objects that could damage them

Cleaning the top of the mower:

Wipe the top with a dry cloth
Use a brush to clean the air flow slots and the fan
Do not use sharp objects

Prohibited products: never use water, water jets (especially high pressure), or chemicals, gasoline, or solvents. These elements can destroy important plastic parts. Regular maintenance of the air vents ensures a longer lifespan and reliable performance of your mower.

Question 2

Why won't the engine of the FLYMO Chevron 37VC lawnmower start?

Accepted Answer

If the engine of your FLYMO Chevron 37VC lawnmower won't start, several causes may be behind this problem. Here are the checks and steps to follow to try to resolve this issue:

1. Check the starting procedure

Make sure the lawnmower is plugged into a functioning electrical outlet.
Check that the power cord is in good condition and properly connected.
To start, you must press the safety trigger (often a small safety lever) and the start handle simultaneously (there may be two levers to operate).

2. Check safety and fuses

Ensure that the lawnmower's safety is not activated or blocked.
Check the fuse of the electrical outlet: if it is blown, replace it with a fuse of the same rating.
Make sure the electrical outlet is working by testing it with another device.

3. Other checks

If the lawnmower is equipped with a main switch, ensure it is in the ON position.
Inspect the power cord for any cuts or damage.

4. In case of persistent problems

If despite these checks, the engine still does not start, there may be an internal electrical fault. In this case, it is recommended to unplug the lawnmower and contact a customer service or an authorized repair center for a more thorough inspection.

User manual FLYMO Lawn mower : user manuals and guides in PDF

Models FLYMO Lawn mower most viewed

Other categories FLYMO

Recent questions about Lawn mower FLYMO