GSB 18 VE2LI - Drill BOSCH - Free user manual and instructions

USER MANUAL GSB 18 VE2LI BOSCH

WARNUNG OBJ_BUCH-1237-001.book Page 3 Tuesday, July 27, 2010 4:18 PM4 | Deutsch

OBJ_BUCH-1237-001.book Page 4 Tuesday, July 27, 2010 4:18 PMDeutsch | 5

OBJ_BUCH-1237-001.book Page 5 Tuesday, July 27, 2010 4:18 PM6 | Deutsch

OBJ_BUCH-1237-001.book Page 6 Tuesday, July 27, 2010 4:18 PMDeutsch | 7

OBJ_BUCH-1237-001.book Page 7 Tuesday, July 27, 2010 4:18 PM8 | Deutsch

2004/108/EG, 2006/42/EG.

Senior Vice President

OBJ_BUCH-1237-001.book Page 8 Tuesday, July 27, 2010 4:18 PMDeutsch | 9

OBJ_BUCH-1237-001.book Page 9 Tuesday, July 27, 2010 4:18 PM10 | Deutsch

General Power Tool Safety

Read all safety warnings and all

instructions. Failure to follow

the warnings and instructions may result in elec-

tric shock, fire and/or serious injury.

Save all warnings and instructions for future

The term “power tool” in the warnings refers to

your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

f Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

f Do not operate power tools in explosive at-

mospheres, such as in the presence of flam-

mable liquids, gases or dust. Power tools

create sparks which may ignite the dust or

f Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

f Power tool plugs must match the outlet.

Never modify the plug in any way. Do not

use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs

and matching outlets will reduce risk of elec-

f Avoid body contact with earthed or ground-

ed surfaces, such as pipes, radiators, rang-

es and refrigerators. There is an increased

risk of electric shock if your body is earthed

f Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

f Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the pow-

er tool. Keep cord away from heat, oil,

sharp edges and moving parts. Damaged or

entangled cords increase the risk of electric

f When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduc-

es the risk of electric shock.

f If operating a power tool in a damp location

is unavoidable, use a residual current de-

vice (RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

f Stay alert, watch what you are doing and

use common sense when operating a power

tool. Do not use a power tool while you are

tired or under the influence of drugs, alco-

hol or medication. A moment of inattention

while operating power tools may result in se-

rious personal injury.

f Use personal protective equipment. Always

wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes,

hard hat, or hearing protection used for ap-

propriate conditions will reduce personal in-

f Prevent unintentional starting. Ensure the

switch is in the off-position before connect-

ing to power source and/or battery pack,

picking up or carrying the tool. Carrying

power tools with your finger on the switch or

energising power tools that have the switch

on invites accidents.

f Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power

tool may result in personal injury.

f Do not overreach. Keep proper footing and

balance at all times. This enables better con-

trol of the power tool in unexpected situa-

f Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught

WARNING OBJ_BUCH-1237-001.book Page 11 Tuesday, July 27, 2010 4:18 PM12 | English

2 609 140 752 | (27.7.10) Bosch Power Tools

f If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-

Power tool use and care

f Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

f Do not use the power tool if the switch does

not turn it on and off. Any power tool that

cannot be controlled with the switch is dan-

gerous and must be repaired.

f Disconnect the plug from the power source

and/or the battery pack from the power

tool before making any adjustments, chang-

ing accessories, or storing power tools.

Such preventive safety measures reduce the

risk of starting the power tool accidentally.

f Store idle power tools out of the reach of

children and do not allow persons unfamil-

iar with the power tool or these instructions

to operate the power tool. Power tools are

dangerous in the hands of untrained users.

f Maintain power tools. Check for misalign-

ment or binding of moving parts, breakage

of parts and any other condition that may

affect the power tool’s operation. If dam-

aged, have the power tool repaired before

use. Many accidents are caused by poorly

maintained power tools.

f Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

f Use the power tool, accessories and tool

bits etc. in accordance with these instruc-

tions, taking into account the working con-

ditions and the work to be performed. Use

of the power tool for operations different

from those intended could result in a hazard-

Battery tool use and care

f Recharge only with the charger specified by

the manufacturer. A charger that is suitable

for one type of battery pack may create a risk

of fire when used with another battery pack.

f Use power tools only with specifically des-

ignated battery packs. Use of any other bat-

tery packs may create a risk of injury and fire.

f When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects, that can make a con-

nection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

f Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If

contact accidentally occurs, flush with wa-

ter. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

f Have your power tool serviced by a quali-

fied repair person using only identical re-

placement parts. This will ensure that the

safety of the power tool is maintained.

Safety Warnings for Drills and

GSB 14,4 VE-2-LI/GSB 18 VE-2-LI

f Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

GSR 18 VE-2-LI/GSB 18 VE-2-LI

f Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal in-

f When working with the machine, always

hold it firmly with both hands and provide

for a secure stance. The power tool is guided

more secure with both hands.

OBJ_BUCH-1237-001.book Page 12 Tuesday, July 27, 2010 4:18 PMEnglish | 13

Bosch Power Tools 2 609 140 752 | (27.7.10)

GSR 14,4 VE-2-LI/GSR 18 VE-2-LI/

GSB 14,4 VE-2-LI/GSB 18 VE-2-LI

f Hold power tool by insulated gripping sur-

faces, when performing an operation where

the cutting accessory or fastener may con-

tact hidden wiring. Cutting accessory and

fasteners contacting a “live” wire may make

exposed metal parts of the power tool “live”

and could give the operator an electric

f Use appropriate detectors to determine if

utility lines are hidden in the work area or

call the local utility company for assistance.

Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can

lead to explosion. Penetrating a water line

causes property damage or may cause an

f Switch off the power tool immediately

when the tool insert jams. Be prepared for

high reaction torque that can cause kick-

back. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

f Hold the machine with a firm grip. High re-

action torque can briefly occur while driving

in and loosening screws.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

f Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

f Do not open the battery. Danger of short-

Protect the battery against heat, e. g.,

against continuous intense sunlight,

fire, water, and moisture. Danger of

f In case of damage and improper use of the

battery, vapours may be emitted. Provide

for fresh air and seek medical help in case

of complaints. The vapours can irritate the

f Use the battery only in conjunction with

your Bosch power tool. This measure alone

protects the battery against dangerous over-

f Use only original Bosch batteries with the

voltage listed on the nameplate of your

power tool. When using other batteries, e. g.

imitations, reconditioned batteries or other

brands, there is danger of injury as well as

property damage through exploding batter-

Additional Safety and Working

f Dusts from materials such as lead-contain-

ing coatings, some wood types, minerals

and metal can be harmful to one’s health

and cause allergic reactions, lead to respi-

ratory infections and/or cancer. Materials

containing asbestos may only be worked by

– Provide for good ventilation of the work-

– It is recommended to wear a P2 filter-

Observe the relevant regulations in your

country for the materials to be worked.

f Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the rota-

tional direction switch to the centre posi-

tion. Unintentional actuation of the On/Off

switch can lead to injuries.

f The battery is supplied partially charged. To

ensure full battery capacity, completely

charge the battery in the battery charger

before using for the first time.

f The battery is equipped with a NTC temper-

ature control which allows charging only

within a temperature range of between

0 °C and 45 °C. A long battery service life

is achieved in this manner.

f Read the operating instructions of the bat-

OBJ_BUCH-1237-001.book Page 13 Tuesday, July 27, 2010 4:18 PM14 | English

2 609 140 752 | (27.7.10) Bosch Power Tools

f Apply the power tool to the screw only

when it is switched off. Rotating tool inserts

f Adjust the gear switch only when the ma-

chine is at a complete stop.

f Always push the gear selector and turn the

operating mode selector switch through to

the stop. Otherwise, the machine can be-

f In case of excessive loading, e. g., pro-

longed blocking of the application tool, the

electronics switch off the power tool. After

switching on again, the power tool can be

used again as intended for. In case of con-

tinued overload, the power tool will switch

off again in order to prevent damage to the

The following symbols are important for reading and understanding the operating instructions.

Please take note of the symbols and their meaning. The correct interpretation of the symbols will

help you to use the machine in a better and safer manner.

Symbol Meaning Symbol Meaning

Cordless screwdriver/

Combination cordless drill

Grey-marked area: Handle

(insulated gripping surface)

Read all safety warnings and all

Before any work on the machine

itself, remove the battery

Movement direction Reaction direction

Drilling and screwdriving Impact drilling

Low speed High speed

Switching On Switching Off

M Maximum torque according to

OBJ_BUCH-1237-001.book Page 14 Tuesday, July 27, 2010 4:18 PMEnglish | 15

Bosch Power Tools 2 609 140 752 | (27.7.10)

Cordless screwdriver/Combination cordless

Battery, application tools and other accessories

shown or described are not part of the standard

A complete overview of accessories can be

found in our accessories program.

The machine is intended for driving in and loos-

ening screws as well as for drilling in wood, met-

al, ceramics and plastic. GSB machines are ad-

ditionally intended for impact drilling in bricks,

brickwork and masonry.

The technical data of the machine are listed in

the Table on page 216–217.

Please observe the article number on the type

plate of your machine. The trade names of the

individual machines may vary.

Declaration of Conformity

We declare under our sole responsibility that

the product described under “Technical Data” is

in conformity with the following standards or

standardization documents: EN 60745 accord-

ing to the provisions of the directives

2004/108/EC, 2006/42/EC.

The measured values of the machine are listed

in the table on page 216–217.

Noise and vibrational values (vector sum of

three directions) determined according to

The vibration emission level given in this infor-

mation sheet has been measured in accordance

with a standardised test given in EN 60745 and

may be used to compare one tool with another.

It may be used for a preliminary assessment of

The declared vibration emission level repre-

sents the main applications of the tool. However

if the tool is used for different applications, with

different accessories or poorly maintained, the

vibration emission may differ. This may signifi-

cantly increase the exposure level over the total

An estimation of the level of exposure to vibra-

tion should also take into account the times

when the tool is switched off or when it is run-

ning but not actually doing the job. This may sig-

nificantly reduce the exposure level over the to-

Identify additional safety measures to protect

the operator from the effects of vibration such

as: maintain the tool and the accessories, keep

the hands warm, organisation of work patterns.

Ø Drilling diameter, max. Ø Max. screw dia.

Chuck clamping range Weight according to

EPTA-Procedure 01/2003

Symbol Meaning Symbol Meaning

Dr. Egbert Schneider

Senior Vice President

OBJ_BUCH-1237-001.book Page 15 Tuesday, July 27, 2010 4:18 PM16 | English

2 609 140 752 | (27.7.10) Bosch Power Tools

Mounting and Operation

Maintenance and Cleaning

f For safe and proper working, always keep

the machine and ventilation slots clean.

Clean the application tool, the tool holder, the

power tool’s ventilations slots, and the battery’s

ventilation slots each time after using.

After-sales Service and

Our after-sales service responds to your ques-

tions concerning maintenance and repair of your

product as well as spare parts. Exploded views

and information on spare parts can also be

Our customer service representatives can an-

swer your questions concerning possible appli-

cations and adjustment of products and acces-

In all correspondence and spare parts order,

please always include the 10-digit article

number given on the type plate of the machine.

Robert Bosch Ltd. (B.S.C.)

Removing the Battery 1 218

Inserting the Battery 2 218

Checking the battery charge condition 3 218

Changing the position of the auxiliary handle 4 219

Mounting application tools 5 219

Reversing the Rotational Direction 6 220

Gear Selection, Mechanical 10 221

Switching On and Off 11 222

Selecting accessories – 223

OBJ_BUCH-1237-001.book Page 16 Tuesday, July 27, 2010 4:18 PMEnglish | 17

Bosch Power Tools 2 609 140 752 | (27.7.10)

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Customer Contact Center

Republic of South Africa

Hotline: +27 (011) 6 51 96 00

35 Roper Street, New Centre

E-Mail: bsctools@icon.co.za

KZN – BSC Service Centre

Unit E, Almar Centre

E-Mail: bsc.dur@za.bosch.com

Western Cape – BSC Service Centre

Democracy Way, Prosperity Park

Dispatch batteries only when the housing is un-

damaged. Tape or mask off open contacts and

pack up the battery in such a manner that it can-

not move around in the packaging.

When dispatching lithium-ion batteries, compul-

sory labeling may be required. Please observe

the respective national regulations.

The machine, rechargeable batteries, accesso-

ries and packaging should be sorted for environ-

mental-friendly recycling.

Do not dispose of power tools and batteries/re-

chargeable batteries into household waste!

Only for EC countries:

According to the European Guide-

line 2002/96/EC for Waste Electri-

cal and Electronic Equipment and

its implementation into national

right, power tools that are no

longer usable must be collected

separately and disposed of in an environmental-

Only for EC countries:

Defective or dead out battery packs/batteries

must be recycled according the guideline

Batteries no longer suitable for use can be

directly returned at:

Robert Bosch Ltd. (B.S.C.)

E-Mail: boschservicecentre@bosch.com

Subject to change without notice.

OBJ_BUCH-1237-001.book Page 17 Tuesday, July 27, 2010 4:18 PM18 | Français 2 609 140 752 | (27.7.10) Bosch Power Tools fr

Avertissements de sécurité

AVERTISSEMENT OBJ_BUCH-1237-001.book Page 18 Tuesday, July 27, 2010 4:18 PMFrançais | 19

OBJ_BUCH-1237-001.book Page 19 Tuesday, July 27, 2010 4:18 PM20 | Français

OBJ_BUCH-1237-001.book Page 20 Tuesday, July 27, 2010 4:18 PMFrançais | 21

OBJ_BUCH-1237-001.book Page 21 Tuesday, July 27, 2010 4:18 PM22 | Français

OBJ_BUCH-1237-001.book Page 22 Tuesday, July 27, 2010 4:18 PMFrançais | 23

percussion sans fil.

Senior Vice President

OBJ_BUCH-1237-001.book Page 23 Tuesday, July 27, 2010 4:18 PM24 | Français

OBJ_BUCH-1237-001.book Page 24 Tuesday, July 27, 2010 4:18 PMFrançais | 25

ADVERTENCIA OBJ_BUCH-1237-001.book Page 26 Tuesday, July 27, 2010 4:18 PMEspañol | 27

OBJ_BUCH-1237-001.book Page 27 Tuesday, July 27, 2010 4:18 PM28 | Español

OBJ_BUCH-1237-001.book Page 28 Tuesday, July 27, 2010 4:18 PMEspañol | 29

OBJ_BUCH-1237-001.book Page 29 Tuesday, July 27, 2010 4:18 PM30 | Español

OBJ_BUCH-1237-001.book Page 30 Tuesday, July 27, 2010 4:18 PMEspañol | 31

2004/108/CE, 2006/42/CE.

Senior Vice President

OBJ_BUCH-1237-001.book Page 31 Tuesday, July 27, 2010 4:18 PM32 | Español

OBJ_BUCH-1237-001.book Page 32 Tuesday, July 27, 2010 4:18 PMEspañol | 33

MR P R O D U C T O C E R T I F I C A D O C E R T I F I E D P R O D U C T OBJ_BUCH-1237-001.book Page 33 Tuesday, July 27, 2010 4:18 PM34 | Português 2 609 140 752 | (27.7.10) Bosch Power Tools pt

ATENÇÃO OBJ_BUCH-1237-001.book Page 34 Tuesday, July 27, 2010 4:18 PMPortuguês | 35

OBJ_BUCH-1237-001.book Page 35 Tuesday, July 27, 2010 4:18 PM36 | Português

OBJ_BUCH-1237-001.book Page 36 Tuesday, July 27, 2010 4:18 PMPortuguês | 37

OBJ_BUCH-1237-001.book Page 37 Tuesday, July 27, 2010 4:18 PM38 | Português

OBJ_BUCH-1237-001.book Page 38 Tuesday, July 27, 2010 4:18 PMPortuguês | 39

Senior Vice President

OBJ_BUCH-1237-001.book Page 39 Tuesday, July 27, 2010 4:18 PM40 | Português

OBJ_BUCH-1237-001.book Page 40 Tuesday, July 27, 2010 4:18 PMItaliano | 41 Bosch Power Tools 2 609 140 752 | (27.7.10) it

AVVERTENZA OBJ_BUCH-1237-001.book Page 41 Tuesday, July 27, 2010 4:18 PM42 | Italiano

OBJ_BUCH-1237-001.book Page 42 Tuesday, July 27, 2010 4:18 PMItaliano | 43

OBJ_BUCH-1237-001.book Page 43 Tuesday, July 27, 2010 4:18 PM44 | Italiano

OBJ_BUCH-1237-001.book Page 44 Tuesday, July 27, 2010 4:18 PMItaliano | 45

OBJ_BUCH-1237-001.book Page 45 Tuesday, July 27, 2010 4:18 PM46 | Italiano

Senior Vice President

OBJ_BUCH-1237-001.book Page 46 Tuesday, July 27, 2010 4:18 PMItaliano | 47

OBJ_BUCH-1237-001.book Page 47 Tuesday, July 27, 2010 4:18 PM48 | Italiano

OBJ_BUCH-1237-001.book Page 48 Tuesday, July 27, 2010 4:18 PMNederlands | 49 Bosch Power Tools 2 609 140 752 | (27.7.10) nl

WAARSCHUWING OBJ_BUCH-1237-001.book Page 49 Tuesday, July 27, 2010 4:18 PM50 | Nederlands

OBJ_BUCH-1237-001.book Page 50 Tuesday, July 27, 2010 4:18 PMNederlands | 51

OBJ_BUCH-1237-001.book Page 51 Tuesday, July 27, 2010 4:18 PM52 | Nederlands

OBJ_BUCH-1237-001.book Page 52 Tuesday, July 27, 2010 4:18 PMNederlands | 53

OBJ_BUCH-1237-001.book Page 53 Tuesday, July 27, 2010 4:18 PM54 | Nederlands

Senior Vice President

OBJ_BUCH-1237-001.book Page 54 Tuesday, July 27, 2010 4:18 PMNederlands | 55

OBJ_BUCH-1237-001.book Page 55 Tuesday, July 27, 2010 4:18 PM56 | Nederlands

OBJ_BUCH-1237-001.book Page 56 Tuesday, July 27, 2010 4:18 PMDansk | 57 Bosch Power Tools 2 609 140 752 | (27.7.10) da

ADVARSEL OBJ_BUCH-1237-001.book Page 57 Tuesday, July 27, 2010 4:18 PM58 | Dansk

OBJ_BUCH-1237-001.book Page 58 Tuesday, July 27, 2010 4:18 PMDansk | 59

OBJ_BUCH-1237-001.book Page 59 Tuesday, July 27, 2010 4:18 PM60 | Dansk

OBJ_BUCH-1237-001.book Page 60 Tuesday, July 27, 2010 4:18 PMDansk | 61

Senior Vice President

OBJ_BUCH-1237-001.book Page 61 Tuesday, July 27, 2010 4:18 PM62 | Dansk

OBJ_BUCH-1237-001.book Page 62 Tuesday, July 27, 2010 4:18 PMDansk | 63

Bosch Service Center

OBJ_BUCH-1237-001.book Page 63 Tuesday, July 27, 2010 4:18 PM64 | Svenska 2 609 140 752 | (27.7.10) Bosch Power Tools sv

VARNING OBJ_BUCH-1237-001.book Page 64 Tuesday, July 27, 2010 4:18 PMSvenska | 65

OBJ_BUCH-1237-001.book Page 65 Tuesday, July 27, 2010 4:18 PM66 | Svenska

OBJ_BUCH-1237-001.book Page 66 Tuesday, July 27, 2010 4:18 PMSvenska | 67

OBJ_BUCH-1237-001.book Page 67 Tuesday, July 27, 2010 4:18 PM68 | Svenska

Senior Vice President

OBJ_BUCH-1237-001.book Page 68 Tuesday, July 27, 2010 4:18 PMSvenska | 69

Bosch Service Center

OBJ_BUCH-1237-001.book Page 69 Tuesday, July 27, 2010 4:18 PM70 | Norsk 2 609 140 752 | (27.7.10) Bosch Power Tools no

ADVARSEL OBJ_BUCH-1237-001.book Page 70 Tuesday, July 27, 2010 4:18 PMNorsk | 71

OBJ_BUCH-1237-001.book Page 71 Tuesday, July 27, 2010 4:18 PM72 | Norsk

OBJ_BUCH-1237-001.book Page 72 Tuesday, July 27, 2010 4:18 PMNorsk | 73

OBJ_BUCH-1237-001.book Page 73 Tuesday, July 27, 2010 4:18 PM74 | Norsk

Senior Vice President

OBJ_BUCH-1237-001.book Page 74 Tuesday, July 27, 2010 4:18 PMNorsk | 75

OBJ_BUCH-1237-001.book Page 75 Tuesday, July 27, 2010 4:18 PM76 | Suomi 2 609 140 752 | (27.7.10) Bosch Power Tools fi

VAROITUS OBJ_BUCH-1237-001.book Page 76 Tuesday, July 27, 2010 4:18 PMSuomi | 77

OBJ_BUCH-1237-001.book Page 77 Tuesday, July 27, 2010 4:18 PM78 | Suomi

OBJ_BUCH-1237-001.book Page 78 Tuesday, July 27, 2010 4:18 PMSuomi | 79

OBJ_BUCH-1237-001.book Page 79 Tuesday, July 27, 2010 4:18 PM80 | Suomi

Senior Vice President

OBJ_BUCH-1237-001.book Page 80 Tuesday, July 27, 2010 4:18 PMSuomi | 81

OBJ_BUCH-1237-001.book Page 81 Tuesday, July 27, 2010 4:18 PM82 | Suomi

OBJ_BUCH-1237-001.book Page 82 Tuesday, July 27, 2010 4:18 PMEλληνικά | 83

OBJ_BUCH-1237-001.book Page 83 Tuesday, July 27, 2010 4:18 PM84 | Eλληνικά

OBJ_BUCH-1237-001.book Page 84 Tuesday, July 27, 2010 4:18 PMEλληνικά | 85

OBJ_BUCH-1237-001.book Page 85 Tuesday, July 27, 2010 4:18 PM86 | Eλληνικά

OBJ_BUCH-1237-001.book Page 86 Tuesday, July 27, 2010 4:18 PMEλληνικά | 87

OBJ_BUCH-1237-001.book Page 87 Tuesday, July 27, 2010 4:18 PM88 | Eλληνικά

Senior Vice President

OBJ_BUCH-1237-001.book Page 88 Tuesday, July 27, 2010 4:18 PMEλληνικά | 89

OBJ_BUCH-1237-001.book Page 89 Tuesday, July 27, 2010 4:18 PM90 | Eλληνικά

OBJ_BUCH-1237-001.book Page 90 Tuesday, July 27, 2010 4:18 PMTürkçe | 91 Bosch Power Tools 2 609 140 752 | (27.7.10) tr

UYARI OBJ_BUCH-1237-001.book Page 91 Tuesday, July 27, 2010 4:18 PM92 | Türkçe

OBJ_BUCH-1237-001.book Page 92 Tuesday, July 27, 2010 4:18 PMTürkçe | 93

OBJ_BUCH-1237-001.book Page 93 Tuesday, July 27, 2010 4:18 PM94 | Türkçe

OBJ_BUCH-1237-001.book Page 94 Tuesday, July 27, 2010 4:18 PMTürkçe | 95

Senior Vice President

OBJ_BUCH-1237-001.book Page 95 Tuesday, July 27, 2010 4:18 PM96 | Türkçe

OBJ_BUCH-1237-001.book Page 96 Tuesday, July 27, 2010 4:18 PMTürkçe | 97

OBJ_BUCH-1237-001.book Page 97 Tuesday, July 27, 2010 4:18 PM98 | Polski

OBJ_BUCH-1237-001.book Page 98 Tuesday, July 27, 2010 4:18 PMPolski | 99

OBJ_BUCH-1237-001.book Page 99 Tuesday, July 27, 2010 4:18 PM100 | Polski

OBJ_BUCH-1237-001.book Page 100 Tuesday, July 27, 2010 4:18 PMPolski | 101

OBJ_BUCH-1237-001.book Page 101 Tuesday, July 27, 2010 4:18 PM102 | Polski

OBJ_BUCH-1237-001.book Page 102 Tuesday, July 27, 2010 4:18 PMPolski | 103

2004/108/WE, 2006/42/WE.

Senior Vice President

OBJ_BUCH-1237-001.book Page 103 Tuesday, July 27, 2010 4:18 PM104 | Polski

Robert Bosch Sp. z o.o.

OBJ_BUCH-1237-001.book Page 104 Tuesday, July 27, 2010 4:18 PMPolski | 105

OBJ_BUCH-1237-001.book Page 105 Tuesday, July 27, 2010 4:18 PM106 | Česky 2 609 140 752 | (27.7.10) Bosch Power Tools cs

OBJ_BUCH-1237-001.book Page 106 Tuesday, July 27, 2010 4:18 PMČesky | 107

OBJ_BUCH-1237-001.book Page 107 Tuesday, July 27, 2010 4:18 PM108 | Česky

OBJ_BUCH-1237-001.book Page 108 Tuesday, July 27, 2010 4:18 PMČesky | 109

OBJ_BUCH-1237-001.book Page 109 Tuesday, July 27, 2010 4:18 PM110 | Česky

Senior Vice President

OBJ_BUCH-1237-001.book Page 110 Tuesday, July 27, 2010 4:18 PMČesky | 111

OBJ_BUCH-1237-001.book Page 111 Tuesday, July 27, 2010 4:18 PM112 | Česky

OBJ_BUCH-1237-001.book Page 112 Tuesday, July 27, 2010 4:18 PMSlovensky | 113 Bosch Power Tools 2 609 140 752 | (27.7.10) sk

chladničky. Keby by bolo Vaše telo

POZOR OBJ_BUCH-1237-001.book Page 113 Tuesday, July 27, 2010 4:18 PM114 | Slovensky

OBJ_BUCH-1237-001.book Page 114 Tuesday, July 27, 2010 4:18 PMSlovensky | 115

OBJ_BUCH-1237-001.book Page 115 Tuesday, July 27, 2010 4:18 PM116 | Slovensky

OBJ_BUCH-1237-001.book Page 116 Tuesday, July 27, 2010 4:18 PMSlovensky | 117

OBJ_BUCH-1237-001.book Page 117 Tuesday, July 27, 2010 4:18 PM118 | Slovensky

Senior Vice President

OBJ_BUCH-1237-001.book Page 118 Tuesday, July 27, 2010 4:18 PMSlovensky | 119

OBJ_BUCH-1237-001.book Page 119 Tuesday, July 27, 2010 4:18 PM120 | Slovensky

OBJ_BUCH-1237-001.book Page 120 Tuesday, July 27, 2010 4:18 PMMagyar | 121 Bosch Power Tools 2 609 140 752 | (27.7.10) hu

FIGYELMEZTETÉS OBJ_BUCH-1237-001.book Page 121 Tuesday, July 27, 2010 4:18 PM122 | Magyar

OBJ_BUCH-1237-001.book Page 122 Tuesday, July 27, 2010 4:18 PMMagyar | 123

OBJ_BUCH-1237-001.book Page 123 Tuesday, July 27, 2010 4:18 PM124 | Magyar

OBJ_BUCH-1237-001.book Page 124 Tuesday, July 27, 2010 4:18 PMMagyar | 125

OBJ_BUCH-1237-001.book Page 125 Tuesday, July 27, 2010 4:18 PM126 | Magyar

Senior Vice President

OBJ_BUCH-1237-001.book Page 126 Tuesday, July 27, 2010 4:18 PMMagyar | 127

OBJ_BUCH-1237-001.book Page 127 Tuesday, July 27, 2010 4:18 PM128 | Magyar

OBJ_DOKU-22991-002.fm Page 129 Thursday, January 20, 2011 3:40 PM130 | Русский

OBJ_DOKU-22991-002.fm Page 130 Thursday, January 20, 2011 3:40 PMРусский | 131

OBJ_DOKU-22991-002.fm Page 131 Thursday, January 20, 2011 3:40 PM132 | Русский

OBJ_DOKU-22991-002.fm Page 132 Thursday, January 20, 2011 3:42 PMРусский | 133

OBJ_DOKU-22991-002.fm Page 133 Thursday, January 20, 2011 3:40 PM134 | Русский

Senior Vice President

OBJ_DOKU-22991-002.fm Page 134 Thursday, January 20, 2011 3:40 PMРусский | 135

OBJ_DOKU-22991-002.fm Page 135 Thursday, January 20, 2011 3:40 PM136 | Русский

OBJ_BUCH-1237-001.book Page 137 Tuesday, July 27, 2010 4:18 PM138 | Українська

OBJ_BUCH-1237-001.book Page 138 Tuesday, July 27, 2010 4:18 PMУкраїнська | 139

OBJ_BUCH-1237-001.book Page 139 Tuesday, July 27, 2010 4:18 PM140 | Українська

OBJ_BUCH-1237-001.book Page 140 Tuesday, July 27, 2010 4:18 PMУкраїнська | 141

OBJ_BUCH-1237-001.book Page 141 Tuesday, July 27, 2010 4:18 PM142 | Українська

Senior Vice President

OBJ_BUCH-1237-001.book Page 142 Tuesday, July 27, 2010 4:18 PMУкраїнська | 143

OBJ_BUCH-1237-001.book Page 143 Tuesday, July 27, 2010 4:18 PM144 | Українська

OBJ_BUCH-1237-001.book Page 144 Tuesday, July 27, 2010 4:18 PMRomână | 145 Bosch Power Tools 2 609 140 752 | (27.7.10) ro

AVERTISMENT OBJ_BUCH-1237-001.book Page 145 Tuesday, July 27, 2010 4:18 PM146 | Română

OBJ_BUCH-1237-001.book Page 146 Tuesday, July 27, 2010 4:18 PMRomână | 147

OBJ_BUCH-1237-001.book Page 147 Tuesday, July 27, 2010 4:18 PM148 | Română

OBJ_BUCH-1237-001.book Page 148 Tuesday, July 27, 2010 4:18 PMRomână | 149

OBJ_BUCH-1237-001.book Page 149 Tuesday, July 27, 2010 4:18 PM150 | Română

Directivelor 2004/108/CE, 2006/42/CE.

Senior Vice President

OBJ_BUCH-1237-001.book Page 150 Tuesday, July 27, 2010 4:18 PMRomână | 151

Robert Bosch SRL Bosch Service Center

Conform Directivei Europene

Conform Directivei 2006/66/CE acumulato-

OBJ_BUCH-1237-001.book Page 151 Tuesday, July 27, 2010 4:18 PM152 | Български

OBJ_BUCH-1237-001.book Page 152 Tuesday, July 27, 2010 4:18 PMБългарски | 153

OBJ_BUCH-1237-001.book Page 153 Tuesday, July 27, 2010 4:18 PM154 | Български

OBJ_BUCH-1237-001.book Page 154 Tuesday, July 27, 2010 4:18 PMБългарски | 155

OBJ_BUCH-1237-001.book Page 155 Tuesday, July 27, 2010 4:18 PM156 | Български

OBJ_BUCH-1237-001.book Page 156 Tuesday, July 27, 2010 4:18 PMБългарски | 157

OBJ_BUCH-1237-001.book Page 157 Tuesday, July 27, 2010 4:18 PM158 | Български

Senior Vice President

OBJ_BUCH-1237-001.book Page 158 Tuesday, July 27, 2010 4:18 PMБългарски | 159

OBJ_BUCH-1237-001.book Page 159 Tuesday, July 27, 2010 4:18 PM160 | Srpski 2 609 140 752 | (27.7.10) Bosch Power Tools sr

UPOZORENJE OBJ_BUCH-1237-001.book Page 160 Tuesday, July 27, 2010 4:18 PMSrpski | 161

OBJ_BUCH-1237-001.book Page 161 Tuesday, July 27, 2010 4:18 PM162 | Srpski

OBJ_BUCH-1237-001.book Page 162 Tuesday, July 27, 2010 4:18 PMSrpski | 163

OBJ_BUCH-1237-001.book Page 163 Tuesday, July 27, 2010 4:18 PM164 | Srpski

2004/108/EG, 2006/42/EG.

Senior Vice President

OBJ_BUCH-1237-001.book Page 164 Tuesday, July 27, 2010 4:18 PMSrpski | 165

OBJ_BUCH-1237-001.book Page 165 Tuesday, July 27, 2010 4:18 PM166 | Srpski

OBJ_BUCH-1237-001.book Page 166 Tuesday, July 27, 2010 4:18 PMSlovensko | 167 Bosch Power Tools 2 609 140 752 | (27.7.10) sl

OPOZORILO OBJ_BUCH-1237-001.book Page 167 Tuesday, July 27, 2010 4:18 PM168 | Slovensko

OBJ_BUCH-1237-001.book Page 168 Tuesday, July 27, 2010 4:18 PMSlovensko | 169

OBJ_BUCH-1237-001.book Page 169 Tuesday, July 27, 2010 4:18 PM170 | Slovensko

OBJ_BUCH-1237-001.book Page 170 Tuesday, July 27, 2010 4:18 PMSlovensko | 171

Senior Vice President

OBJ_BUCH-1237-001.book Page 171 Tuesday, July 27, 2010 4:18 PM172 | Slovensko

OBJ_BUCH-1237-001.book Page 172 Tuesday, July 27, 2010 4:18 PMSlovensko | 173

OBJ_BUCH-1237-001.book Page 173 Tuesday, July 27, 2010 4:18 PM174 | Hrvatski 2 609 140 752 | (27.7.10) Bosch Power Tools hr

UPOZORENJE OBJ_BUCH-1237-001.book Page 174 Tuesday, July 27, 2010 4:18 PMHrvatski | 175

OBJ_BUCH-1237-001.book Page 175 Tuesday, July 27, 2010 4:18 PM176 | Hrvatski

OBJ_BUCH-1237-001.book Page 176 Tuesday, July 27, 2010 4:18 PMHrvatski | 177

OBJ_BUCH-1237-001.book Page 177 Tuesday, July 27, 2010 4:18 PM178 | Hrvatski

2004/108/EG, 2006/42/EG.

Senior Vice President

OBJ_BUCH-1237-001.book Page 178 Tuesday, July 27, 2010 4:18 PMHrvatski | 179

OBJ_BUCH-1237-001.book Page 179 Tuesday, July 27, 2010 4:18 PM180 | Hrvatski

TÄHELEPANU OBJ_BUCH-1237-001.book Page 181 Tuesday, July 27, 2010 4:18 PM182 | Eesti

OBJ_BUCH-1237-001.book Page 182 Tuesday, July 27, 2010 4:18 PMEesti | 183

OBJ_BUCH-1237-001.book Page 183 Tuesday, July 27, 2010 4:18 PM184 | Eesti

OBJ_BUCH-1237-001.book Page 184 Tuesday, July 27, 2010 4:18 PMEesti | 185

Senior Vice President

OBJ_BUCH-1237-001.book Page 185 Tuesday, July 27, 2010 4:18 PM186 | Eesti

OBJ_BUCH-1237-001.book Page 186 Tuesday, July 27, 2010 4:18 PMEesti | 187

BRĪDINĀJUMS OBJ_BUCH-1237-001.book Page 188 Tuesday, July 27, 2010 4:18 PMLatviešu | 189

OBJ_BUCH-1237-001.book Page 189 Tuesday, July 27, 2010 4:18 PM190 | Latviešu

OBJ_BUCH-1237-001.book Page 190 Tuesday, July 27, 2010 4:18 PMLatviešu | 191

OBJ_BUCH-1237-001.book Page 191 Tuesday, July 27, 2010 4:18 PM192 | Latviešu

OBJ_BUCH-1237-001.book Page 192 Tuesday, July 27, 2010 4:18 PMLatviešu | 193

Senior Vice President

OBJ_BUCH-1237-001.book Page 193 Tuesday, July 27, 2010 4:18 PM194 | Latviešu

OBJ_BUCH-1237-001.book Page 194 Tuesday, July 27, 2010 4:18 PMLatviešu | 195

OBJ_BUCH-1237-001.book Page 195 Tuesday, July 27, 2010 4:18 PM196 | Lietuviškai

OBJ_BUCH-1237-001.book Page 196 Tuesday, July 27, 2010 4:18 PMLietuviškai | 197

OBJ_BUCH-1237-001.book Page 197 Tuesday, July 27, 2010 4:18 PM198 | Lietuviškai

OBJ_BUCH-1237-001.book Page 198 Tuesday, July 27, 2010 4:18 PMLietuviškai | 199

OBJ_BUCH-1237-001.book Page 199 Tuesday, July 27, 2010 4:18 PM200 | Lietuviškai

OBJ_BUCH-1237-001.book Page 200 Tuesday, July 27, 2010 4:18 PMLietuviškai | 201

Senior Vice President

OBJ_BUCH-1237-001.book Page 201 Tuesday, July 27, 2010 4:18 PM202 | Lietuviškai

OBJ_BUCH-1237-001.book Page 202 Tuesday, July 27, 2010 4:18 PMﻲﺑﺮﻋ

Senior Vice President

“ﺔﻴﺋﺎﺑﺮﻬﻜﻟﺍ ﺓﺪﻌﻟﺍ” ﺢﻠﻄﺼﻤﺑ ﺪﺼﻘﻳ

ﺩﺎﺘﻋ ﺀﺍﺪﺗﺭﺍ ﺪﳛ .ﺔﻴﻗﺍﻭ ﺕﺍﺭﺎﻈﻧ

Senior Vice President

ﯽﻗﺮﺑ ﺭﺍﺰﺑﺍ ،ﺮﻤﺘﺴﻣ ﺭﺎﺸﻓ ﻝﺎﻤﻋ

OBJ_BUCH-1237-001.book Page 216 Tuesday, July 27, 2010 4:18 PM| 217

OBJ_BUCH-1237-001.book Page 217 Tuesday, July 27, 2010 4:18 PM2 609 140 752 | (27.7.10) Bosch Power Tools 218 |

OBJ_BUCH-1237-001.book Page 218 Tuesday, July 27, 2010 4:18 PM| 219

OBJ_BUCH-1237-001.book Page 219 Tuesday, July 27, 2010 4:18 PM2 609 140 752 | (27.7.10) Bosch Power Tools

OBJ_BUCH-1237-001.book Page 220 Tuesday, July 27, 2010 4:18 PM| 221

OBJ_DOKU-21918-001.fm Page 222 Thursday, July 29, 2010 1:56 PM| 223

OBJ_BUCH-1237-001.book Page 223 Tuesday, July 27, 2010 4:18 PM