ManualGo.com BLP31.A0WH - Blender KENWOOD - Free user manual and instructions
Find the device manual for free BLP31.A0WH KENWOOD in PDF.
Download the instructions for your Blender in PDF format for free! Find your manual BLP31.A0WH - KENWOOD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BLP31.A0WH by KENWOOD.
USER MANUAL BLP31.A0WH KENWOOD
New Lane Havant Hampshire PO9 2NH
© Copyright 2019 Kenwood Limited. All rights reserved
62 10 60 Before plugging in 10 60 12 62 l Make sure your electricity supply is the same as the one shown 13 63 11 61 11 61 13 63 on the underside of your appliance.
Before using your appliance refer to
7 57 5 55 5 55 7 57 the separate safety68 warning leaflet 58 56 6 56 8 58 and read the instructions for usage 9 59 7 57 7 57 9 59 contained in this manual carefully. 10 60 8 58 8 58 10 60 Retain for future reference. 11 61 9 59
64 12 62 12 62 14 64 This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to13 come into 15 65 63 contact with food.
Before using for the first time
A B C D l Wash the parts: see ‘Care and cleaning’.
BA C DC A K U GG A B K L U V A B C K L M M K LK U B L V C PO VU WV XW YX ZY C E G W D D N X E NM N ON M ML O Y F M N O P W X Y Z F P Q
66 Grinding mill blade 66 68
O Use your blender for soups,
27 77 25 75 25 75 27 77 Rdrinks, S pâtés, T mayonnaise, K K L L breadcrumbs, biscuit crumbs, 28 78 26 76 26 76 28 78 chopping nuts and crushing ice.
Fit the 80 blender sealing ring 28 78 28 78 30 80 into the blender blade unit 31 81 29 79 29 79 31 ensuring 81 the seal is located correctly in the grooved area. 32 82 30 80 30 80 32 82 l Leaking will occur if the seal 33 83 31 81 31 is damaged 81 33 83 or incorrectly fitted. 34 84 32 82 32 82 34 84 2 Screw the blade assembly 35 85 83 33 83 35 onto 85 goblet - ensuring I33 J the the blade assembly is fully 36 86 34 84 34 84 36 86 tightened. Refer to the 37 87 S35 T 85 35 85 37 graphics 87 on the underside of the blade 38 88 unit as follows: 36 86 36 86 38 88
37 37 39 40 38 38 40
C C M M W W D D N N X X E E F F
341 Put your ingredients into the
91 39 89 39 89 41 91 J goblet. 42 Fit the90 92 40 4 lid 40 90 42 92
T HReferIto Illustrations
J A A & B B 26 76 24 74
70 Grating mill blade assembly
Z F I supplied) J G19 HG 69 IHmillJ(if 21 71 20 18 18 20
F G millH(if supplied)
1 51feed Drip51 1 51 2 52 Locking lid with pouring 2 52 2 52 slots 3 53 3 53 3 53 Goblet 4 54 4 54 4 54 5 55 5 Glass 55 blender 51 55 51 1 51 6 56 1 51cap Filler 6 56 1 51 51 6 56 2111 52 51 51on lid 2 52 Push 71 57 2 52 51 7 57 2 52 2 52 71 57 3 53 2 52 51 Goblet 21 52 3 53 51 8 58 3 53 2 52 51 8 58 311 53 51 3 53 1 51 1 51 8 58 4 54 3 53 21 52 51 3 53 4 54 21 52 51 9 59 4 54 3 53 2 52 9 59 4 54 2 52 Blenders 4 54 2 52 2 52 9 59 5 55 4 54 3 53 2 52 4 54 5 55 3 53 2 52 10 60 5 55 4 54 Blender sealing ring 3 53 10 60 5 55 3 53 5 55 3 53 3 53 10 60 6 56 5 55 4 54 3 53 5 55 6 56 Blender blade unit 4 54 3 53 11 61 6 56 5 55 4 54 11 61 6 56 4 54 6 56 4 54 4 54 11 61 unit 7 57 6 56 5 55 Power 4 54 6 56 7 57 5 55 4 54 12 62 7 57 6 56 5 55 12 62 7 57 5 55 7 57 + Pulse control 5 55 Speed 5 55 12 62 8 58 7 57 6 56 5 55 7 57 8 58 6 56 5 55 13 63 8 58 7 57 6 56 13 63 8 58storage 6 56 Cord 8 58 6 56 6 56 13 63 9 59 8 58 7 57 6 56 8 58 9 59 7 57 6 56 14 64 9 59 8 58 7 57 14 64 9 59 7 57 9 59 7 57 7 57 14 64 10 60 9 59 8 58 7 Blend-Xtract 57 9 59 10 60 8 58 2GO (if 7 57 15 65 10 60 9 59 8 58 15 65 10 60 8 58 10 60 8 58 8 58 15 65 11 61 10 60 9 59 supplied) 8 58 10 60 11 61 9 59 8 58 16 66 11 61 10 60 9 59 16 66 11 61 9 59 11 61 9 59 Dispensing lid 9 59 16 66 12 62 11 61 10 60 9 59 11 61 12 62 10 60 9 59 17 67 12 62 11 61 10 60 17 67 12 62 10 60 Bottle 12 62 10 60 10 60 17 67 13 63 12 62 11 61 10 60 12 62 13 63 11 61 10 60 18 68 13 63 12 62 11 61 Sealing ring 18 68 13 63 11 61 13 63 11 61 11 61 18 68 14 64 13 63 12 62 11 61 unit 13 63 14 64 12 62 Blade 11 61 19 69 14 64 13 63 12 62 19 69 14 64 12 62 14 64 12 62 12 62 19 69 15 65 14 64 13 63 Base 12 62 14 64 15 65 13 63 12 62 20 70 15 65 14 64 13 63 20 70 15 65 13 63 15 65 13 63 13 63 20 70 16 66 15 65 14 64 13 63 15 65 16 66 14 64 13 63 21 71 16 66 15 65 14 64 21 Multi 71 mill (if supplied) 16 66 14 64 16 66 14 64 14 64 21 71 17 67 16 66 15 65 14 64 16 66 17 67 15 65 14 64 22 72mill jar Multi 17 67 16 66 15 65 22 72 17 67 15 65 17 67 15 65 15 65 22 72 18 68 17 67 16 66 15 65 17 67mill sealing ring Multi 18 68 16 66 15 65 23 73 18 68 17 67 16 66 23 73 18 68 16 66 18 68 16 66 16 66 23 73mill blade unit Multi 19 69 18 68 17 67 16 66 18 68 19 69 17 67 16 66 24 74 19 69 18 68 17 67 24 74 19 69 17 67 19 69 17 67 17 67 24 74 20 70 19 69 18 68 17 67 19 69 20 70 18 68 17 67 25 75
Turn clockwise to lock B - Glass Blender Fit the filler cap to the lid and push down to secure. 5 Place the blender onto the power unit and turn clockwise to lock . O The appliance will not work if the blender is incorrectly fitted. 6 Select a speed (refer to the Recommended Usage).
Blend-Xtract 2GO (if supplied)
Refer to Illustrations C 1 Add ingredients to the bottle up to the 400ml level mark. O For best blending performance always add ice/ frozen ingredients to the bottle first. O When adding frozen ingredients (i.e. frozen fruit, yoghurt, ice cream or ice) do not blend more than 60g or 3 ice cubes. O Do not blend frozen ingredients without liquid. 2 Fit the sealing ring to the blade unit, ensuring the seal is located correctly in the grooved area. Then clip to the base. O Leaking will occur if the seal is damaged or incorrectly fitted. 3 Hold the underside of the blade unit and lower it onto the bottle, blades down. 4 Screw the blade assembly onto the bottle. Refer to the graphics on the underside of the blade unit as follows:
O Glass Blender - To blend dry ingredients - cut into pieces, remove the filler cap, then with the machine running, drop the pieces down one by one. Keep your hand over the opening. For best results empty regularly. O The processing of spices is not recommended as they may damage the plastic parts. O When making mayonnaise, put all the ingredients, except the oil, into the blender. Glass Blender - Remove the filler cap. Plastic Blender - Pour through the drip feed in the lid. Then, with the appliance running, add the oil slowly through the hole in the lid. O Thick mixtures, e.g. pâtés and dips, may need scraping down. If the mixture is difficult to process, add more liquid.
Shake to disperse the ingredients.
O Place the blender onto the power unit and turn clockwise to lock . 5 Select maximum speed. Allow the ingredients to blend until smooth. O Once your drink has reached the desired consistency, you can use the pulse ‘P’ to ensure all ingredients are thoroughly blended. O
simply flip open the lid cover. The drink can be consumed straight from the bottle.
Using the drinking lid
1 Fit and lock the lid by turning clockwise. 2 When you want to drink, Hints and Tips
O Note that when the bottle is filled to max capacity (400ml), this is approximately two servings.
O Ensure your drink is thin enough to be able to drink from the dispensing lid. To make a thinner drink add more liquid. O After blending, some drinks may not be completely smooth due to seeds or the fibrous nature of ingredients. O When drinking through the lid, take care that the drink is smooth and fully processed. Some experimentation may be necessary when processing firm or unripe ingredient to achieve the desired result. O Some drinks may separate on standing, therefore it is best to drink them straight away or stir before drinking. O When the dispensing lid is fitted always keep the bottle upright.
Blender Recommended Usage
Do not operate your appliance for longer than the times specified below without a rest period. Processing continuously for longer periods can damage your appliance. Do not blend more than the maximum capacity stated on the goblet. Do not fill below the minimum capacity marking on the goblet. Usage/food items
Light mixes e.g. batters, milkshakes, scrambled egg
Place the fresh fruit and liquid ingredients in first (includes yoghurt, milk and fruit juices). Then add ice or frozen ingredients (includes frozen fruit, ice or ice cream)
Drinks & Smoothies For best blending performance always add ice/frozen ingredients to the bottle first.
Operates the motor in a start/stop action.
The pulse will operate for as long as it is held in position.
Ice crushing - operate in short bursts until crushed to the desired consistency.
To Use Your Multi Mill
Grating Mill (if supplied)
Refer to Illustrations D Grinding Mill - Refer to
Illustrations E Use your multi mill for nuts, coffee beans and purees.
Suitable for grinding spices, coffee beans and processing ginger, coconut, garlic and chillies.
1 Put your ingredients into the jar. Fill it no more than half full.
2 Fit the multi mill sealing ring into the multi mill blade unit - ensuring the seal is located correctly in the grooved area. O Leaking will occur if the seal is damaged or incorrectly fitted. 3 Turn the blade unit upside down. Lower it into the jar, blades down. Refer to the graphics on the underside of the blade unit as follows: - open
Grating Mill - Refer to
Illustrations F Suitable for grating parmesan cheese, nutmeg, coconut and dried fruit.
1 Place your ingredients into the blade assembly. 2 Fit the lid and turn anticlockwise to lock. 3 Place the mill onto the power unit and lock by turning clockwise until you hear a “click”. 4 Select a speed or use the pulse (P) control (refer to Recommended usage).
4 Place the mill onto the power unit and turn clockwise to lock. 5 Select a speed or use the (P) pulse control (refer to Recommended Usage).
Mill Recommended Usage
Do not operate your appliance for longer than the times specified below without a rest period. Processing continuously for longer periods can damage your appliance. Ingredients
Spices – such as black peppercorns, cardamom seeds, cumin seeds, coriander seeds, fennel seeds, whole cloves etc.
Grating Cheese – cut into 1cm cubes
O For optimum performance when processing spices we recommend that you do not process more than 40g at a time in the mill. O Whole spices retain their flavour for a much longer time than ground spices so it is best to grind a small quantity fresh at a time to retain the flavour. O To release the maximum flavour and essential oils whole spices are best roasted prior to milling. O Baby food/purees - allow cooked food to cool to room temperature before processing in the mill.
Blender and Multi Mill blade assembly
O Remove the blade unit from the goblet or mill by turning to the unlock position to release.
Refer to Illustration G for cleaning information.
O O O Always switch off, unplug and dismantle before cleaning.
Empty the goblet before unscrewing it from the blade unit. Do not immerse the blade unit in water.
Grinding and grating mills
O Remove the lid from the blade assembly by turning in a clockwise direction. 1 Blender/multi mill: remove and wash the sealing ring. 2 Do not touch the sharp blades – brush them clean using hot soapy water, then rinse thoroughly under the tap. Do not immerse the blade unit in water. 3 Leave to dry upside down.
Wipe with a damp cloth, then dry. O Do not immerse the power unit in water. O Store excess cord in the storage area on the underside of the power unit.
O The appliance will not operate.
Check blender plugged in.
Check blade assembly is fully tightened and locked onto the power unit.
-Xtract 2Go or mill not assembled or fitted to power unit correctly Blender, Blend -Xtract 2Go or muti mill leaking from blade assembly.
Seal incorrectly fitted. Seal damaged.
Check seal is fitted correctly and not damaged. To obtain a replacement seal see
'Service and Customer Care'.
Seal missing from blade unit when removed from packaging.
The seal is packed pre-fitted to the blade unit.
Unscrew goblet/bottle/ mill jar and check that seal is fitted to blade unit.
To obtain a replacement seal see 'Service and Customer Care'.
Poor blending performance.
Mix being processed too thick or insufficient liquid added.
Scrape mix down and add additional liquid.
Trying pulsing first to start the mixing process. Do not fill below the minimum capacity marking on the goblet.
Quantity being processed too small.
If none of the above solve the problem see 'Service and Customer
2 Place the carrot into the blender, add the onion and garlic. Add sufficient stock to reach the 1000ml level marked on the goblet. Fit the lid and filler cap.
3 Blend on maximum speed for 5 seconds for a coarse soup or longer for a finer result. 4 Season and simmer the soup for 30-35 minutes or until cooked. Add extra liquid if required.
Carrot and Coriander
Soup 25g butter 50g onion chopped 1 clove garlic crushed 400g carrot cut into 11⁄2 cm cubes cold chicken stock 10-15ml (2-3tsp) ground coriander salt and pepper 1 Melt the butter in a pan, add the onion and garlic and fry until soft.
Service and customer care
O If you experience any problems with the operation of your appliance, before requesting assistance refer to the
“troubleshooting guide” section in the manual or visit www.kenwoodworld.com.
O Please note that your product is covered by a warranty, which complies with all legal provisions concerning any existing warranty and consumer rights in the country where the product was purchased.
O If your Kenwood product malfunctions or you find any defects, please send it or bring it to an authorised KENWOOD Service
Centre. To find up to date details of your nearest authorised KENWOOD Service centre visit www.kenwoodworld.com or the website specific to your Country.