Q: What are the instructions for the first use of the Melitta Purista coffee maker?

Before you begin: Unpack the machine, remove all packaging materials, and place it on a stable and dry surface. Leave at least 10 cm of space from a wall and 20 cm above. Check that the mains voltage (220-240V, 50/60 Hz) matches the outlet. First startup - steps: Place a cup under the spout to collect the rinse water Press the "On/Off" button - the water symbol lights up Remove the water tank, rinse it thoroughly, then fill it with fresh water and reinstall it Press "Coffee Strength" - hot water flows naturally (about 2-3 minutes). This is the automatic circuit flushing Once the rinsing is complete, the coffee bean symbol lights up Now fill the coffee bean container Important detail: Do not taste the first two cups prepared. They allow the machine to complete its initialization and ensure optimal quality. Optional: You can adjust the water hardness or install a filter cartridge (refer to the manual for this procedure).

Q: How to use the Melitta Caffeo Barista TS for the first time?

Here are the steps to initialize your Melitta Caffeo Barista TS : Initial Setup Press the power button . The machine automatically launches the setup assistant on the control screen. Select your language using the navigation keys. Set the time by configuring hours and minutes. Indicate the water hardness using the test strip provided in the packaging. Preparing the Machine Fill the water tank with fresh water up to the maximum (capacity: 1.8 liters). If you are installing a water filter, remember to soak it briefly before inserting it. Fill the bean container with quality coffee beans. First Coffees Once the screen displays “Ready”, the machine is operational. Important: the first two coffees served after the initial startup should not be consumed - they allow the machine to rinse properly and reach optimal performance.

Q: What does the flashing steam icon on the MELITTA Latticia OT coffee machine mean?

The flashing Steam Preparation indicator on your MELITTA Latticia OT has three main meanings depending on the usage context. During the initial startup of the machine: The indicator flashes quickly when you turn on the device for the first time. This indicates that the machine is heating its heating system and performing an automatic purge of the circuits. During this phase, hot water flows from the spout and the milk tube. The flashing stops once the purge is complete and the "Ready to operate" and "Coffee bean" indicators light up. When preparing milk-based drinks: When you are making a cappuccino, latte macchiato, or milk foam, the "Steam Preparation" indicator flashes throughout the heating and frothing phase of the milk. This is normal operation indicating that the machine is managing the extraction temperature and steam production for the milk. Maintenance of the milk system: If the "Clean" and "Steam Preparation" indicators light up together (without flashing), it means that the milk preparation system needs to be cleaned after approximately one hundred milk-based drinks. You can continue making drinks, but the cleaning should be done promptly. In summary, the flashing of the "Steam Preparation" indicator is a normal indicator that reflects the activity of the heating and steam system of your MELITTA Latticia OT, whether during startup, milk drink preparation, or to indicate a maintenance need.

Question 1

What are the signs and indicators showing that the MELITTA SOLO coffee machine needs cleaning or maintenance?

Accepted Answer

The MELITTA SOLO has several signals and indicators to indicate a need for cleaning or maintenance:

Indicator lights on the display screen

"Clean" light turns on - Indicates that the automatic cleaning program is necessary. The program should be run every 2 months or after 200 cups prepared. You can also start the program manually at any time. The program lasts about 15 minutes and uses a Melitta® PERFECT CLEAN tablet.
"Descale" light turns on - Indicates that automatic descaling is recommended. This program should be performed every 3 months or at the latest when this light appears. The total duration is about 30 minutes. You must exclusively use Melitta® ANTI-CALC descaler according to the instructions on the packaging.
Water filter replacement light turns on - The Melitta® PRO AQUA water filter must be replaced every 2 months or at the latest when this light appears. The replacement takes a few minutes and the filter should be soaked in lukewarm water for a few minutes before installation.
"Drip tray full" display - A symbol appears to indicate that the drip tray or coffee grounds recovery compartment is full. Empty the relevant tray and replace it.

Regular cleaning tasks without indicator

Daily cleaning - Wipe the exterior of the appliance with a damp soft cloth and standard dish soap, empty the drip tray, and empty the coffee grounds recovery compartment after each use.
Weekly cleaning of the extraction chamber - It is recommended to clean the extraction chamber (brewing group) once a week. Turn off the appliance, remove the right side panel, press the red button on the handle and hold it down, turn the handle clockwise until it stops, then remove the chamber. Rinse it thoroughly with clear water to remove all coffee residues, then replace it by performing the same actions in reverse.

By following these indicators and performing regular maintenance, you ensure the longevity and optimal performance of your MELITTA SOLO. The automatic cleaning and descaling programs eliminate residues and limescale that cannot be removed manually.

Question 2

What are the instructions for the first use of the Melitta Purista coffee maker?

Accepted Answer

Before you begin: Unpack the machine, remove all packaging materials, and place it on a stable and dry surface. Leave at least 10 cm of space from a wall and 20 cm above. Check that the mains voltage (220-240V, 50/60 Hz) matches the outlet.

First startup - steps:

Place a cup under the spout to collect the rinse water
Press the "On/Off" button - the water symbol lights up
Remove the water tank, rinse it thoroughly, then fill it with fresh water and reinstall it
Press "Coffee Strength" - hot water flows naturally (about 2-3 minutes). This is the automatic circuit flushing
Once the rinsing is complete, the coffee bean symbol lights up
Now fill the coffee bean container

Important detail: Do not taste the first two cups prepared. They allow the machine to complete its initialization and ensure optimal quality.

Optional: You can adjust the water hardness or install a filter cartridge (refer to the manual for this procedure).

Question 3

How to use the Melitta Caffeo Barista TS for the first time?

Accepted Answer

Here are the steps to initialize your Melitta Caffeo Barista TS:

Initial Setup

Press the power button. The machine automatically launches the setup assistant on the control screen.
Select your language using the navigation keys.
Set the time by configuring hours and minutes.
Indicate the water hardness using the test strip provided in the packaging.

Preparing the Machine

Fill the water tank with fresh water up to the maximum (capacity: 1.8 liters). If you are installing a water filter, remember to soak it briefly before inserting it.
Fill the bean container with quality coffee beans.

First Coffees

Once the screen displays “Ready”, the machine is operational. Important: the first two coffees served after the initial startup should not be consumed - they allow the machine to rinse properly and reach optimal performance.

Question 4

What does the flashing steam icon on the MELITTA Latticia OT coffee machine mean?

Accepted Answer

The flashing Steam Preparation indicator on your MELITTA Latticia OT has three main meanings depending on the usage context.

During the initial startup of the machine: The indicator flashes quickly when you turn on the device for the first time. This indicates that the machine is heating its heating system and performing an automatic purge of the circuits. During this phase, hot water flows from the spout and the milk tube. The flashing stops once the purge is complete and the "Ready to operate" and "Coffee bean" indicators light up.

When preparing milk-based drinks: When you are making a cappuccino, latte macchiato, or milk foam, the "Steam Preparation" indicator flashes throughout the heating and frothing phase of the milk. This is normal operation indicating that the machine is managing the extraction temperature and steam production for the milk.

Maintenance of the milk system: If the "Clean" and "Steam Preparation" indicators light up together (without flashing), it means that the milk preparation system needs to be cleaned after approximately one hundred milk-based drinks. You can continue making drinks, but the cleaning should be done promptly.

In summary, the flashing of the "Steam Preparation" indicator is a normal indicator that reflects the activity of the heating and steam system of your MELITTA Latticia OT, whether during startup, milk drink preparation, or to indicate a maintenance need.

Question 5

How to eliminate air in the pipes of the MELITTA Avanza series 600 coffee machine?

Accepted Answer

The trapped air in the pipes of your MELITTA Avanza series 600 may come from prolonged inactivity, handling of the water tank, or use after transport. Here are the procedures to eliminate this air and restore optimal operation:

Automatic priming on startup: The simplest solution is to restart the device. When powered on, the machine automatically performs a rinse that removes air from the pipes. Hot water first flows from the Cappuccinatore and then from the spout - this is the automatic purging in action.

Check the water tank: Ensure that the water tank is properly filled and well positioned in the device. An insufficiently filled or poorly fitted tank can allow air to enter the system. Open the tank lid, remove it from the top by holding the handle, rinse it with clear water, fill it with fresh water, then replace it and close the lid until it clicks.

Clean the extraction chamber: A dirty extraction chamber can create air pockets and reduce water flow. Turn off the device, open the right side cover, press the red lever, and turn the extraction chamber handle clockwise until it clicks, then remove it. Rinse all surfaces thoroughly under running water, especially the filter cartridge which should not have any coffee residue. Let it drain, then reinstall it by turning counterclockwise until it clicks.

Descale the machine: Accumulated limescale can clog the pipes and promote air formation. Start the descaling program by turning on the device, pressing the Service button for more than 2 seconds, and then selecting the descaling program. The program lasts about 20-25 minutes and removes limescale deposits that block water flow. Only use Melitta® specific products for automatic espresso machines.

Manual purging procedure: If air persists after the previous steps, use the device's purge function. Turn on the machine, press the Service and Coffee buttons for more than 2 seconds to access setting mode 2, select the Purge function, and press the Service button for more than 2 seconds to start. The device will purge the air pipes through the steam tube of the Cappuccinatore.

If the problem persists after following these steps, it is possible that a pipe is damaged or an internal valve is not functioning properly. In this case, contact Melitta customer service, as internal repairs should not be performed by the user.

Question 6

How to replace the filter on the MELITTA SOLO coffee machine?

Accepted Answer

To replace the filter in your MELITTA SOLO coffee machine, follow these simple steps:

Turn off the machine and unplug it for your safety.
Open the water compartment where the filter is located.
Gently remove the old filter if it is still in place.
Insert the new filter into the designated slot, ensuring it is properly positioned.
Close the water compartment securely.
Plug in and turn on the machine. It will be ready to use with the new filter installed.

Regularly replacing the filter ensures better water quality and extends the lifespan of your MELITTA SOLO coffee machine.

Question 7

How to remove the coffee bean container from the Melitta Purista coffee maker?

Accepted Answer

To remove the coffee bean container from the Melitta Purista coffee maker, follow these simple steps:

Steps to extract the coffee bean container

Turn off and unplug the coffee maker to ensure your safety before any handling.
Open the top cover where the coffee bean container is located.
Grab the container and gently pull it upwards. On some models, a button or a small tab may be needed to release the container.
Remove the container completely to empty or clean it.
After use, replace the container by aligning it correctly and then gently pushing it until it clicks into place.
Close the cover and plug the coffee maker back in to turn it on again.

These steps allow for easy and safe maintenance of the bean container, essential for ensuring the quality of your coffee and the longevity of your appliance.

Question 8

How to clean the grinder of the Melitta Purista super-automatic coffee machine?

Accepted Answer

The grinder of your Melitta Purista coffee machine is an integral part of the machine, and complete internal access is not provided. However, you can effectively maintain it by following these steps:

Regular cleaning of the bean container: Completely empty the coffee bean container and clean it with a soft, dry cloth. Never use water or liquid products to avoid damaging the grinder mechanism.

Maintenance of the brewing unit: To maintain optimal operation of the grinder, clean the brewing unit once a week. Open the lid (9), press the red lever (19), and turn the handle clockwise until it stops. Remove the brewing unit and rinse it thoroughly under running water from all sides, then reinstall it.

Automatic cleaning program: Start the cleaning program every 2 months (or according to the displayed cleaning indicator) to remove coffee oil residues. Use only Melitta® PERFECT CLEAN cleaning tablets designed for automatic coffee machines.

Important precautions: Never use instant coffee, frozen or caramelized beans as they can block the grinder. After each change of bean type, the first two prepared coffees may contain remnants of the previous bean type. If you observe a blockage of the grinder despite following these tips, contact Melitta customer service rather than attempting internal repairs.

Question 9

How to clean the coffee reservoir of the Melitta Purista coffee maker?

Accepted Answer

To effectively clean the coffee reservoir of your Melitta Purista coffee maker, follow the steps below:

Steps to clean the coffee reservoir:

Unplug the coffee maker: Ensure that the device is turned off and disconnected from the power outlet to avoid any risk.
Remove the reservoir: Gently take out the coffee reservoir from the machine. Depending on the model, this may require pressing a button or simply lifting it.
Empty the contents: If there is coffee or residue present, empty it and rinse the reservoir with hot water to remove any leftovers.
Clean the reservoir: Use a soft sponge or cloth with a little mild dish soap. Avoid abrasive products or rough sponges that could damage the surface.
Rinse thoroughly: Rinse the reservoir well with clear water to remove any soap residue.
Dry the reservoir: Let it air dry or wipe it with a clean cloth before putting it back in place.
Clean the exterior: Take the opportunity to wipe the exterior of the reservoir and the base of the coffee maker with a damp cloth.

Regularly performing this cleaning ensures the proper functioning of your Melitta Purista coffee maker and always delicious coffee.

Question 10

How to clean the water filter of the MELITTA Look V Perfection coffee maker?

Accepted Answer

To effectively clean the water filter of your MELITTA Look V Perfection coffee maker, follow these simple steps:

1. Removing the filter

Gently remove the water filter from the reservoir. Make sure the reservoir is empty before proceeding.

2. Rinsing with clear water

Rinse the filter under a stream of cold or lukewarm water to remove impurities and accumulated residues. Avoid using chemicals or detergents that could damage the filter.

3. Soaking for stubborn dirt

If the filter is heavily soiled, soak it in a mixture of water and white vinegar (in equal parts) for 15 to 30 minutes. This helps dissolve limescale deposits and other dirt.

4. Rinsing after soaking

After soaking, rinse the filter thoroughly with clear water to remove any traces of vinegar.

5. Drying

Allow the filter to air dry completely before placing it back in the reservoir to prevent any bacterial growth.

6. Cleaning the reservoir

Take the opportunity to also clean the water reservoir with lukewarm water and a soft cloth to avoid any accumulation of deposits.

Regular maintenance of the filter ensures better quality of your coffee and prolongs the lifespan of your coffee maker.

User manual MELITTA : user manuals and guides in PDF

Models MELITTA most viewed

Browse manuals MELITTA by appliance type

Recent questions about devices MELITTA