Question 1

What to do if the BABYPHONE HIGH CARE baby monitor does not turn off?

Accepted Answer

If your BABYPHONE HIGH CARE baby monitor does not turn off, several simple checks and actions should resolve this issue. Start by precisely identifying whether it is the transmitter (the device to be placed in the baby's room) or the receiver (the device for the parents) that is causing the problem, as each has its own power switch.

For the BABYPHONE HIGH CARE transmitter: Locate button 1 at the top of the device, which is the On/Off switch (distinct from the night light switch). Press this button firmly to completely turn off the transmitter. If the device is powered by the supplied adapter (6V, 300 mA connected to the jack socket 7a on the side), unplug it from the wall outlet. This immediately cuts off the power, even if the button is unresponsive. Leave the device unplugged for a few minutes to allow for a complete restart of the circuits.

For the BABYPHONE HIGH CARE receiver: Use button 8 located on the top (the On/Off switch with vibration symbol). Toggle it to the off position to completely turn off the device. If the screen remains on or still vibrates, hold the button down for 3 seconds. If the receiver is placed on its charging dock, first remove it so that it switches to battery mode, then use the switch to turn it off.

If the device is unresponsive: Check that the switch or button is not mechanically stuck. For the AAA battery-powered transmitter, open the battery compartment (under the locking cover) and ensure that the 3 batteries are correctly inserted respecting the polarity (+/-), as incorrectly positioned batteries can cause malfunctions. For the receiver, check that the rechargeable lithium battery is properly inserted in its compartment. Finally, wait 30 seconds completely unplugged (power adapter removed for the transmitter, battery removed for the receiver), then reconnect the power - this forces a complete reset of the electronic circuits.

If after these actions the BABYPHONE HIGH CARE baby monitor still does not turn off, contact Babymoov customer service. A faulty power button or an electronic malfunction requiring repair may be the cause. Do not force the controls at the risk of further damaging it.

Question 2

What should I do if the screen of the BABYMOOV BABYPHONE HIGH CARE baby monitor does not turn on and only the red light is on?

Accepted Answer

If the screen of your BABYMOOV BABYPHONE HIGH CARE receiver does not turn on and only the red light is visible, it generally means that the device is charging. The red charging indicator light should remain on throughout the battery charging process. A charging time of about 3 hours is required for a full recharge. Once the battery is fully charged, the indicator will turn green and you can use the receiver normally.

First, check that the receiver is properly positioned on its charging base. Ensure that the charging contacts (metal pins) of the receiver are making good contact with those of the base. Also, check that the power cable of the charging base is firmly plugged into a functional wall outlet. After 3 hours of charging, check that the indicator has turned green, confirming that the battery is fully charged.

If the indicator remains red after 4 hours of charging or does not turn green, completely turn off the receiver, wait a few minutes, and then turn it back on. A restart can resolve some temporary charging or display issues. You can also check that the charging contacts (on the base and on the device) are not dirty or damaged; clean them gently if necessary.

If after a restart the screen remains off and the red light persists, unplug the charging base for 30 seconds, then plug it back in. The receiver should then restart its normal charging cycle. If the problem continues and the indicator never turns green after a night of charging, the rechargeable lithium battery in your device may be defective or completely discharged beyond the recovery threshold.

If none of these steps resolve the issue, contact Babymoov customer service to report the malfunction. Do not force the device or open the casing, as this would void your warranty. The BABYPHONE HIGH CARE receiver uses a factory-installed 3.7 V rechargeable lithium battery; only a professional can safely replace it.

Question 3

How to collect the cooking juice with the BABYMOOV Nutribaby food processor if it doesn't have a juice collector?

Accepted Answer

The BABYMOOV Nutribaby food processor actually has an integrated cooking juice collector (also called a receptacle). Contrary to what the question suggests, you do not need to look for an alternative solution: this accessory is included in all Nutribaby models.

How to use the juice collector: During steaming, the collector is placed under the baskets and naturally collects the juice from the food. Make sure to reposition it properly after removing the cooking trays (step D4 of the manual). The juice flows into this removable receptacle without passing through the cooking water, preserving the nutritional benefits of your food.

Collecting juice during blending: Once cooking is complete, you can easily collect the juice accumulated in the collector using the 'tongs' side of the provided spatula. Pour this juice into the mixing bowl according to the desired texture (maximum 200 ml) to achieve a smoother puree rich in nutrients. The amount of juice depends on your preference: more juice for a smooth texture, less for a thick puree.

Maintaining the collector: The juice receptacle is removable and can be easily cleaned with hot water and a bit of dish soap, or directly in the dishwasher for added convenience.

Question 4

What should I do if my BABYMOOV NUTRIBABY cooking robot suddenly turns off after blending and won't turn back on?

Accepted Answer

If your BABYMOOV NUTRIBABY suddenly turns off after a blending operation and refuses to restart, the most likely cause is an automatic safety shut-off triggered by motor overheating. The robot has a thermal protection that cuts off power to prevent damage. To restart the device, you must strictly observe a cooling period of at least 30 minutes before turning it back on, as indicated in the official manual.

During blending, never exceed 30 seconds of continuous motor use, as this causes overheating. The recommended procedure is: blend for 5 seconds, let it rest for 5 seconds, blend for another 5 seconds. You can repeat this cycle a maximum of 3 times in a row. After this operation, the device must rest for 30 minutes before any new blending. Failing to respect these times is the main cause of unexpected shutdowns.

Before restarting the device, check the integrity of the installation. Ensure that the cooking pole and blending pole are firmly connected to each other, as a poor fit can be detected by the safety system and block operation. Additionally, check that the blending bowl is properly locked onto its base and that the bowl lid is securely in place, as the device will not operate if these safety features are not engaged.

Next, check the power supply by ensuring that the cable is properly plugged into a functional outlet. Test this outlet with another device to confirm its proper operation. Visually inspect the power cord for any signs of damage (pinching, cuts, wear).

Once the 30 minutes of cooling time have passed, unplug the device for a few minutes, then plug it back in and try to turn it on by pressing the On/Off button located at the back of the blending pole. The LCD screen should light up at the front of the device. If the problem persists after these steps and the device still does not restart, contact BABYMOOV customer service. The manual states that the device contains no user-repairable parts and should not be disassembled: specialized assistance will be necessary.

User manual BABYMOOV : user manuals and guides in PDF

Models BABYMOOV most viewed

Browse manuals BABYMOOV by appliance type

Recent questions about devices BABYMOOV