Question 1

How to collect the cooking juice with the BABYMOOV Nutribaby food processor if it doesn't have a juice collector?

Accepted Answer

The BABYMOOV Nutribaby food processor actually has an integrated cooking juice collector (also called a receptacle). Contrary to what the question suggests, you do not need to look for an alternative solution: this accessory is included in all Nutribaby models.

How to use the juice collector: During steaming, the collector is placed under the baskets and naturally collects the juice from the food. Make sure to reposition it properly after removing the cooking trays (step D4 of the manual). The juice flows into this removable receptacle without passing through the cooking water, preserving the nutritional benefits of your food.

Collecting juice during blending: Once cooking is complete, you can easily collect the juice accumulated in the collector using the 'tongs' side of the provided spatula. Pour this juice into the mixing bowl according to the desired texture (maximum 200 ml) to achieve a smoother puree rich in nutrients. The amount of juice depends on your preference: more juice for a smooth texture, less for a thick puree.

Maintaining the collector: The juice receptacle is removable and can be easily cleaned with hot water and a bit of dish soap, or directly in the dishwasher for added convenience.

Question 2

What should I do if my BABYMOOV NUTRIBABY cooking robot suddenly turns off after blending and won't turn back on?

Accepted Answer

If your BABYMOOV NUTRIBABY suddenly turns off after a blending operation and refuses to restart, the most likely cause is an automatic safety shut-off triggered by motor overheating. The robot has a thermal protection that cuts off power to prevent damage. To restart the device, you must strictly observe a cooling period of at least 30 minutes before turning it back on, as indicated in the official manual.

During blending, never exceed 30 seconds of continuous motor use, as this causes overheating. The recommended procedure is: blend for 5 seconds, let it rest for 5 seconds, blend for another 5 seconds. You can repeat this cycle a maximum of 3 times in a row. After this operation, the device must rest for 30 minutes before any new blending. Failing to respect these times is the main cause of unexpected shutdowns.

Before restarting the device, check the integrity of the installation. Ensure that the cooking pole and blending pole are firmly connected to each other, as a poor fit can be detected by the safety system and block operation. Additionally, check that the blending bowl is properly locked onto its base and that the bowl lid is securely in place, as the device will not operate if these safety features are not engaged.

Next, check the power supply by ensuring that the cable is properly plugged into a functional outlet. Test this outlet with another device to confirm its proper operation. Visually inspect the power cord for any signs of damage (pinching, cuts, wear).

Once the 30 minutes of cooling time have passed, unplug the device for a few minutes, then plug it back in and try to turn it on by pressing the On/Off button located at the back of the blending pole. The LCD screen should light up at the front of the device. If the problem persists after these steps and the device still does not restart, contact BABYMOOV customer service. The manual states that the device contains no user-repairable parts and should not be disassembled: specialized assistance will be necessary.

User manual BABYMOOV Baby food processor : user manuals and guides in PDF

Models BABYMOOV Baby food processor most viewed

Other categories BABYMOOV

Recent questions about Baby food processor BABYMOOV