Q: How to configure and map the side buttons of the TRONIC TFM 4 C3 mouse?

The TRONIC TFM 4 C3 mouse has side buttons (forward/backward) that you can customize via the official software. Configuration procedure: Download the software : Go to www.Lidl-service.com and download "TFM 4 C3 Mouse Setup.exe" using the article number 491107_2410 Install : Run the installation file on your PC (compatible with Windows 8 or higher) Open the software and select the side button to configure Assign a function : Choose from the available options (left click, right click, scroll, forward, backward, DPI change) Apply : Confirm the configuration to activate the new settings Important: Without the software, the side buttons remain configured to the default functions (forward/backward navigation in the browser). The configuration software is not available for macOS.

Q: What does error E8 mean on the TRHV 2000 A1 radiator and how can it be fixed?

Error E8 on the TRHV 2000 A1 radiator indicates a tipping warning triggered by the device's anti-tipping safety system. Possible causes The device is tilted more than 30° from the vertical The tipping sensor or the PCB is faulty The device is not positioned stably Solutions Ensure that the radiator is placed on a flat and stable surface Make sure it is not leaning or tilted If the error persists after repositioning, the anti-tipping sensor or the electronic board may be faulty and require replacement This safety feature prevents the device from operating when it risks tipping over, which could cause a fire or injury.

Q: How to install and configure the TRONIC THV 30 A1 fan?

Before you begin: Remove all packaging and check the integrity of all parts. Positioning and installation Place the fan on a solid, flat, and stable surface to avoid tipping over. Maintain a clear space of 10 cm around the product to ensure proper air circulation. Keep the fan away from curtains, walls, and furniture. Never install the fan in a cabinet or outdoors - it is designed for indoor dry use only. Using the controls The fan has an ON/OFF rotary switch with four positions: Position 0 - Off Position 1 - Minimum speed Position 2 - Medium speed Position 3 - Maximum speed Adjusting the tilt A handle located at the back of the fan allows you to manually adjust the vertical tilt of the airflow according to your ventilation needs. Technical specifications: Power supply 220-240V, 50Hz - Power 55W - 3 speed levels

Q: How to reduce the heat or lower the temperature of the TRHV 2000 A1 radiator?

The TRHV 2000 A1 is a heating radiator only - it does not have a cooling or air conditioning function. However, you have several ways to reduce the emitted heat: Maximize heat reduction: ECO Mode - Press the Mode button and select ECO. This mode automatically regulates the heating to 22°C (the lowest preset temperature) and adjusts the fan speed accordingly. Manually reduce the temperature - Use the temperature selector on the device to set it to 5°C (the minimum temperature of the adjustable range from 5 to 35°C). Sleep Mode - Press Mode and choose Sleep. The fan speed will gradually decrease to level 2 over 30 minutes, thus reducing the emitted heat. Completely stop heating: Press the on/off button to turn off the device. Unplug the device if it is not to be used. If you are looking for real cooling (air conditioning), this device will not be able to provide it - it is designed only for heating. To circulate air without heat, you can use the fan-only mode (without activating the heating) if this function is available, otherwise just turn off the device.

Q: How to recover the station after a deep discharge?

If your TRONIC KH 3106 has undergone a deep discharge (battery completely drained), here is the recovery procedure: Immediate Procedure Plug the station directly into a power outlet 230V AC and let it charge uninterrupted for at least 30 to 45 minutes , even if no LED indicator appears initially. Ensure that the power cable is securely connected and shows no signs of wear or damage. Then press the power button and hold it for a few seconds. If the station still does not respond Wait for 1 to 2 hours of continuous charging. Lithium-ion batteries in deep discharge sometimes require a longer period before showing signs of recovery. If the device remains inactive after this duration, it may indicate a malfunction of the protection circuit or an internal battery failure, which would require diagnosis by the TRONIC technical service. Prevention To avoid deep discharges, recharge your station as soon as you notice a decrease in autonomy, and do not let the battery drain completely during long periods of inactivity.

Q: How do I operate the TRONIC TLG 300 C2 laminator?

The TRONIC TLG 300 C2 laminator offers two modes: hot lamination (80 or 125 microns) and cold lamination (up to 200 microns). To start, plug in the device and press the ON/OFF switch. The COLD LED lights up. Then select your mode using the switch: set to 80 MIC for standard pouches, 125 MIC for high-gloss photos, or COLD for lamination without heat. For hot lamination: After selecting your setting (80 or 125 MIC), the device heats up. The corresponding LED blinks during heating and then lights up continuously. We recommend waiting 2 to 3 additional minutes after the indicator light turns on, especially for thin films, to achieve uniform lamination. In the meantime, prepare your document: insert it into a pouch (maximum width 230 mm) with at least 2 mm of space on each side. Lamination procedure: Slowly push the pouch into the front slot, sealed side facing forward , following the format indicators (A4/A5). After a few centimeters, the device will automatically grab it. Release the pouch as soon as it is taken. After it exits, let it cool for at least 1 minute before touching it. To improve the result, you can weigh the hot pouch down with a book or binder to achieve a perfectly smooth surface. For cold lamination: After hot lamination, allow the device to cool completely before switching to COLD mode. The process is the same, but without the risk of burns. Cold pouches can accept a thickness of up to 200 microns. Important points: The device has an anti-jam switch (ABS) if the pouch is inserted at an angle. Each pouch can only be used once. Never insert an open or angled pouch. For best results, only use pouches suitable for your mode (hot or cold) and the selected setting.

Q: How to power and use the TRONIC THV 30 A1 fan?

The TRONIC THV 30 A1 fan operates exclusively on mains power 220-240 V, 50 Hz : it does not have a battery and does not "charge". Simply plug the power cable into a standard wall outlet to turn it on. Installation: Place the fan on a stable, flat surface. Maintain a minimum clearance of 10 cm around the unit (away from walls, curtains, furniture) to ensure proper air circulation. The unit is not designed to be used in a closet or outdoors. Powering on and speed adjustment: Connect the plug to the power outlet, then turn the rotary switch located on the unit to the desired position. Position 0 = off , position 1 = minimum speed , position 2 = medium speed , position 3 = maximum speed . The unit operates continuously as long as it remains plugged in and set to an active speed. Adjusting the tilt: The tilt of the fan can be manually adjusted using the handle located at the back , allowing you to direct the airflow as needed. This model is limited to indoor dry use only and should never be used outdoors or in a damp environment. With a power consumption of 55 W , it delivers a maximum airflow of 58.51 m³/min in maximum mode, with an air speed of 2.62 m/s . The generated noise level is 58.45 dB(A) .

Question 1

How long does it take to fully charge the battery?

Accepted Answer

The charging time of your TRONIC TPB 20000 A1 battery depends on the USB charger used:

With a 15W Power Delivery (PD) USB charger: about 5 to 6 hours for a full charge
With a standard 5V/2A charger: up to 10 hours

For faster charging, use a USB Type-C to Type-C cable with a Power Delivery charger. The battery has a USB Type-C (PD) input that supports up to 15W of maximum power. Note that charging accessories are not included in the packaging.

Question 2

How to turn on and start the TRONIC TFM 4 C3 mouse?

Accepted Answer

The TRONIC TFM 4 C3 mouse does not have a slide switch. Here’s how to turn it on:

Activation Steps:

Remove the battery compartment cover located under the mouse
Insert 2 AA (LR6) batteries respecting the polarities (+/-)
Close the cover until it locks completely
Insert the receiver USB key into a free USB port on your computer
The necessary drivers will install automatically

Once the batteries are installed and the USB key is connected, the mouse is ready to use. The wireless connection is established automatically (range up to 5 meters). You can then start using it normally.

Note: With alkaline batteries, the average battery life is 3 to 6 months depending on usage.

Question 3

How to configure and map the side buttons of the TRONIC TFM 4 C3 mouse?

Accepted Answer

The TRONIC TFM 4 C3 mouse has side buttons (forward/backward) that you can customize via the official software.

Configuration procedure:

Download the software: Go to www.Lidl-service.com and download "TFM 4 C3 Mouse Setup.exe" using the article number 491107_2410
Install: Run the installation file on your PC (compatible with Windows 8 or higher)
Open the software and select the side button to configure
Assign a function: Choose from the available options (left click, right click, scroll, forward, backward, DPI change)
Apply: Confirm the configuration to activate the new settings

Important: Without the software, the side buttons remain configured to the default functions (forward/backward navigation in the browser). The configuration software is not available for macOS.

Question 4

What does error E8 mean on the TRHV 2000 A1 radiator and how can it be fixed?

Accepted Answer

Error E8 on the TRHV 2000 A1 radiator indicates a tipping warning triggered by the device's anti-tipping safety system.

Possible causes

The device is tilted more than 30° from the vertical
The tipping sensor or the PCB is faulty
The device is not positioned stably

Solutions

Ensure that the radiator is placed on a flat and stable surface
Make sure it is not leaning or tilted
If the error persists after repositioning, the anti-tipping sensor or the electronic board may be faulty and require replacement

This safety feature prevents the device from operating when it risks tipping over, which could cause a fire or injury.

Question 5

How to install and configure the TRONIC THV 30 A1 fan?

Accepted Answer

Before you begin: Remove all packaging and check the integrity of all parts.

Positioning and installation

Place the fan on a solid, flat, and stable surface to avoid tipping over.
Maintain a clear space of 10 cm around the product to ensure proper air circulation.
Keep the fan away from curtains, walls, and furniture.
Never install the fan in a cabinet or outdoors - it is designed for indoor dry use only.

Using the controls

The fan has an ON/OFF rotary switch with four positions:

Position 0 - Off
Position 1 - Minimum speed
Position 2 - Medium speed
Position 3 - Maximum speed

Adjusting the tilt

A handle located at the back of the fan allows you to manually adjust the vertical tilt of the airflow according to your ventilation needs.

Technical specifications: Power supply 220-240V, 50Hz - Power 55W - 3 speed levels

Question 6

How to reduce the heat or lower the temperature of the TRHV 2000 A1 radiator?

Accepted Answer

The TRHV 2000 A1 is a heating radiator only - it does not have a cooling or air conditioning function. However, you have several ways to reduce the emitted heat:

Maximize heat reduction:

ECO Mode - Press the Mode button and select ECO. This mode automatically regulates the heating to 22°C (the lowest preset temperature) and adjusts the fan speed accordingly.
Manually reduce the temperature - Use the temperature selector on the device to set it to 5°C (the minimum temperature of the adjustable range from 5 to 35°C).
Sleep Mode - Press Mode and choose Sleep. The fan speed will gradually decrease to level 2 over 30 minutes, thus reducing the emitted heat.

Completely stop heating:

Press the on/off button to turn off the device.
Unplug the device if it is not to be used.

If you are looking for real cooling (air conditioning), this device will not be able to provide it - it is designed only for heating. To circulate air without heat, you can use the fan-only mode (without activating the heating) if this function is available, otherwise just turn off the device.

Question 7

How to recover the station after a deep discharge?

Accepted Answer

If your TRONIC KH 3106 has undergone a deep discharge (battery completely drained), here is the recovery procedure:

Immediate Procedure

Plug the station directly into a power outlet 230V AC and let it charge uninterrupted for at least 30 to 45 minutes, even if no LED indicator appears initially.
Ensure that the power cable is securely connected and shows no signs of wear or damage.
Then press the power button and hold it for a few seconds.

If the station still does not respond

Wait for 1 to 2 hours of continuous charging. Lithium-ion batteries in deep discharge sometimes require a longer period before showing signs of recovery.

If the device remains inactive after this duration, it may indicate a malfunction of the protection circuit or an internal battery failure, which would require diagnosis by the TRONIC technical service.

Prevention

To avoid deep discharges, recharge your station as soon as you notice a decrease in autonomy, and do not let the battery drain completely during long periods of inactivity.

Question 8

How do I operate the TRONIC TLG 300 C2 laminator?

Accepted Answer

The TRONIC TLG 300 C2 laminator offers two modes: hot lamination (80 or 125 microns) and cold lamination (up to 200 microns). To start, plug in the device and press the ON/OFF switch. The COLD LED lights up. Then select your mode using the switch: set to 80 MIC for standard pouches, 125 MIC for high-gloss photos, or COLD for lamination without heat.

For hot lamination: After selecting your setting (80 or 125 MIC), the device heats up. The corresponding LED blinks during heating and then lights up continuously. We recommend waiting 2 to 3 additional minutes after the indicator light turns on, especially for thin films, to achieve uniform lamination. In the meantime, prepare your document: insert it into a pouch (maximum width 230 mm) with at least 2 mm of space on each side.

Lamination procedure: Slowly push the pouch into the front slot, sealed side facing forward, following the format indicators (A4/A5). After a few centimeters, the device will automatically grab it. Release the pouch as soon as it is taken. After it exits, let it cool for at least 1 minute before touching it. To improve the result, you can weigh the hot pouch down with a book or binder to achieve a perfectly smooth surface.

For cold lamination: After hot lamination, allow the device to cool completely before switching to COLD mode. The process is the same, but without the risk of burns. Cold pouches can accept a thickness of up to 200 microns.

Important points: The device has an anti-jam switch (ABS) if the pouch is inserted at an angle. Each pouch can only be used once. Never insert an open or angled pouch. For best results, only use pouches suitable for your mode (hot or cold) and the selected setting.

Question 9

How to power and use the TRONIC THV 30 A1 fan?

Accepted Answer

The TRONIC THV 30 A1 fan operates exclusively on mains power 220-240 V, 50 Hz: it does not have a battery and does not "charge". Simply plug the power cable into a standard wall outlet to turn it on.

Installation: Place the fan on a stable, flat surface. Maintain a minimum clearance of 10 cm around the unit (away from walls, curtains, furniture) to ensure proper air circulation. The unit is not designed to be used in a closet or outdoors.

Powering on and speed adjustment: Connect the plug to the power outlet, then turn the rotary switch located on the unit to the desired position. Position 0 = off, position 1 = minimum speed, position 2 = medium speed, position 3 = maximum speed. The unit operates continuously as long as it remains plugged in and set to an active speed.

Adjusting the tilt: The tilt of the fan can be manually adjusted using the handle located at the back, allowing you to direct the airflow as needed.

This model is limited to indoor dry use only and should never be used outdoors or in a damp environment. With a power consumption of 55 W, it delivers a maximum airflow of 58.51 m³/min in maximum mode, with an air speed of 2.62 m/s. The generated noise level is 58.45 dB(A).

Question 10

How are the channels remembered after the radio is turned off?

Accepted Answer

The TRB 5W A1 has an internal memory that automatically retains your favorite stations even after being turned off. This memory is non-volatile, meaning it does not erase data when you turn off the device. You can store up to 40 DAB+ stations and 40 FM stations.

Upon first use, the radio automatically performs a full scan that detects and saves all available stations in your area. This list of stations is permanently retained. Subsequently, every time you turn on the radio, it automatically retrieves this same list of stations.

You can also manually add your favorite stations by saving specific stations. To do this: find the desired station by browsing the list, then hold down the PRESET button for about 2 seconds. Select the desired memory position (1 to 40) and confirm. The station is then saved at that position and will remain available after the radio is turned off.

When you turn off and then turn on your TRB 5W A1, it will automatically resume the last used source (DAB+, FM, Bluetooth, or AUX). All your saved stations will remain accessible without any additional action. Note that if you perform a new full scan for stations, it may overwrite your previous list: unless you wish to update the available stations, it is better to simply recall your favorite stations using the PRESET button rather than starting a full scan again.

User manual TRONIC : user manuals and guides in PDF

Models TRONIC most viewed

Browse manuals TRONIC by appliance type

Recent questions about devices TRONIC