TPBQ 10000 A1 - Uncategorized TRONIC - Free user manual and instructions
Find the device manual for free TPBQ 10000 A1 TRONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Bank |
| Brand | Tronic |
| Model | TPBQ 10000 A1 |
| Battery Capacity | 10000 mAh (Li-Polymer) |
| Input Port | Micro USB (5V / 2A) |
| Output Port 1 | USB-A (5V / 2.1A) |
| Output Port 2 | USB-A (5V / 1A) |
| Total Output | Up to 2.1A max |
| Charging Time | Approx. 5-6 hours (with 2A charger) |
| Dimensions (L x W x H) | 140 x 70 x 15 mm |
| Weight | 230 g |
| LED Indicators | 4-level battery status LEDs |
| Safety Features | Overcharge, overdischarge, short-circuit, and overcurrent protection |
| Operating Temperature | 0°C to 40°C |
| Color | Black |
| Included Accessories | Micro USB charging cable, user manual |
| Compatibility | Smartphones, tablets, and other USB devices |
| Cleaning Instructions | Wipe with a dry, soft cloth; do not use liquids |
| Storage | Store in a cool, dry place away from direct sunlight |
| Repairability | Not user-serviceable; contact customer support for issues |
Frequently Asked Questions - TPBQ 10000 A1 TRONIC
How do I charge the Tronic TPBQ 10000 A1 power bank?
Use the included Micro USB cable connected to a USB charger (5V/2A recommended). The LED indicators will show charging progress; when all four LEDs are solid, it is fully charged. Charging time is approximately 5-6 hours.
Can I charge multiple devices simultaneously?
Yes, the power bank has two USB-A output ports. Port 1 delivers up to 2.1A and Port 2 up to 1A. The total output is limited to 2.1A, so charging two devices will share the current.
How do I check the remaining battery level?
Press the power button on the side of the power bank. The four LED indicators will light up to show the approximate charge level: 1 LED = 25%, 2 LEDs = 50%, 3 LEDs = 75%, 4 LEDs = 100%.
Is the power bank safe to use with my phone?
Yes, the TPBQ 10000 A1 features overcharge, overdischarge, short-circuit, and overcurrent protection, ensuring safe charging for your devices.
What devices can I charge with this power bank?
It is compatible with most USB-powered devices such as smartphones, tablets, Bluetooth headphones, and cameras. Note that devices requiring more than 2.1A may not charge properly.
How long does it take to fully charge the power bank?
Using a 5V/2A charger, it takes approximately 5-6 hours. Using a lower current charger will take longer.
Can I use the power bank while it is charging?
Yes, you can charge other devices via the USB output ports while the power bank itself is being charged (pass-through charging). However, this may increase total charging time.
What does the LED indicator show when charging?
When charging, the LEDs will flash sequentially. Once fully charged, all four LEDs remain lit. If the LEDs do not light up, check the cable and charger.
How should I clean the power bank?
Disconnect all cables and turn off the device. Wipe the exterior with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners.
What should I do if the power bank gets wet?
Immediately disconnect any devices and do not use the power bank. Dry it thoroughly with a soft cloth and allow it to air dry completely. If internal damage is suspected, contact customer support.
User questions about TPBQ 10000 A1 TRONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TPBQ 10000 A1 - TRONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TPBQ 10000 A1 by TRONIC.
USER MANUAL TPBQ 10000 A1 TRONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TRONIC
Model : TPBQ 10000 A1
Category : Uncategorized