Q: How to change the blade of the PROXXON DSH?

Blade Change - Instructions Before you begin, unplug the device for safety reasons. For blades with a notch (127 mm) Turn the tension knob (position 1) to the left to release the blade Gently press on the upper arm (pos. 5) to create space Insert the new blade with the teeth facing down through the opening of the plate First hook it to the lower support (pos. 3), then to the upper support (pos. 6) Adjust the tension by turning the knob to the right For flat tip blades (125-130 mm) Turn the tension knob to the left Loosen the cylindrical screws with the provided T-handle Allen key Insert the blade with the teeth facing down Firmly tighten the blade forward to achieve maximum force Adjust the final tension by turning the knob to the right Tip: The tension is correct when the blade produces a clear sound when pinched like a string instrument - use the fine adjustment screw if necessary.

Question 1

How to change the blade of the PROXXON DSH?

Accepted Answer

Blade Change - Instructions

Before you begin, unplug the device for safety reasons.

For blades with a notch (127 mm)

Turn the tension knob (position 1) to the left to release the blade
Gently press on the upper arm (pos. 5) to create space
Insert the new blade with the teeth facing down through the opening of the plate
First hook it to the lower support (pos. 3), then to the upper support (pos. 6)
Adjust the tension by turning the knob to the right

For flat tip blades (125-130 mm)

Turn the tension knob to the left
Loosen the cylindrical screws with the provided T-handle Allen key
Insert the blade with the teeth facing down
Firmly tighten the blade forward to achieve maximum force
Adjust the final tension by turning the knob to the right

Tip: The tension is correct when the blade produces a clear sound when pinched like a string instrument - use the fine adjustment screw if necessary.

Question 2

Where can I find the user manual for the CNC version of the PROXXON PD 400?

Accepted Answer

The PROXXON PD 400 CNC is a specific version of the PROXXON PD 400 grinder equipped for computer numerical control (CNC). To obtain the user manual suitable for this version, here are some tips:

PROXXON official site: Visit the official PROXXON website and look for the support or downloads section. Manufacturers often provide manuals for download for their different product versions.
Contact customer service: If the manual is not available online, contact PROXXON customer service directly. They can provide you with the manual or guide you on how to obtain it.
Forums and communities: Users of PROXXON CNC products sometimes share manuals and tips on specialized forums or user groups.

Make sure to specify the CNC version of the PD 400 when making your request to receive the corresponding manual.

User manual PROXXON : user manuals and guides in PDF

Models PROXXON most viewed

Browse manuals PROXXON by appliance type

Recent questions about devices PROXXON