How to change the drill bit of your Meister Craft MSB11002 drill?

Q: How to change the drill bit of your Meister Craft MSB11002 drill?

Before you begin: make sure to unplug the drill from the power outlet. Changing Procedure Your Meister Craft MSB11002 drill is equipped with a keyless quick-release chuck , making the drill bit change very simple and without the need for additional tools: Firmly hold the rear sleeve of the chuck (the part at the back) Turn the front sleeve (the visible part) counterclockwise until it opens sufficiently Remove the used drill bit and insert the new drill bit into the chuck Turn the front sleeve clockwise to tighten it securely by hand Chuck capacities: the chuck can accommodate drill bits up to a maximum diameter of 13 mm. Follow the recommended drilling diameters according to the material: 13 mm in concrete, 18 mm in metal, 40 mm in wood. Your chuck requires no special maintenance - just keep it clean and dry.

Question

Accepted Answer

Before you begin: make sure to unplug the drill from the power outlet.

Changing Procedure

Your Meister Craft MSB11002 drill is equipped with a keyless quick-release chuck, making the drill bit change very simple and without the need for additional tools:

Firmly hold the rear sleeve of the chuck (the part at the back)
Turn the front sleeve (the visible part) counterclockwise until it opens sufficiently
Remove the used drill bit and insert the new drill bit into the chuck
Turn the front sleeve clockwise to tighten it securely by hand

Chuck capacities: the chuck can accommodate drill bits up to a maximum diameter of 13 mm. Follow the recommended drilling diameters according to the material: 13 mm in concrete, 18 mm in metal, 40 mm in wood.

Your chuck requires no special maintenance - just keep it clean and dry.

User manual Meister Craft Drill : user manuals and guides in PDF

Models Meister Craft Drill most viewed

Other categories Meister Craft

Recent questions about Drill Meister Craft