Where is the fuse or circuit breaker located on the Kärcher MC 130 Classic sweeper?

Question

Accepted Answer

On the Kärcher MC 130 Classic sweeper, the fuses are located behind a cover situated behind the driver's seat. This is the main electrical compartment of the machine.

To access the fuses:

Stop the engine and ensure you are in a safe position before any handling
Locate the cover behind the driver's seat
Open the cover by unscrewing it or lifting it depending on the type of closure
You will find all the fuses protecting the various circuits of the machine

Main fuses of the MC 130 Classic: the machine has several fuses with different amperages: F1 (30A for the fuel valve), F2 (5A for the BODAS control), F3 (10A for lights and lighting), F4 (7.5A for the spray pump), and other specialized fuses (starter, heating, etc.). The main fuse for the motor (F31) is 70 amperes.

Before replacing a fuse, only use fuses of the same amperage as the faulty one. A fuse with the wrong amperage could damage the machine or create an electrical hazard. If you cannot find the faulty fuse or if you have any doubts about its amperage rating, consult the machine's dashboard or contact an authorized Kärcher service center.

User manual Kärcher Sweeper : user manuals and guides in PDF

Models Kärcher Sweeper most viewed

Other categories Kärcher

Recent questions about Sweeper Kärcher