Why is steam not coming out of my BEKO SGA6124D iron?

Question

Accepted Answer

Here are the checks and solutions to restore steam production on your BEKO SGA6124D iron:

Priority checks

Temperature selection - Steam is not available at the minimum level (•). You need to select a temperature above the first level for steam to work. Make sure you are not on the '•' setting.
Water tank filling - Ensure that the removable water tank is filled. Unplug the device before filling it. The flashing indicator shows that the device has reached the required temperature and that the tank is properly installed.
Steam trigger - Press firmly on the steam trigger (no. 11 on the iron) and hold it down to generate steam. Release to stop.

If steam still does not come out

Perform a self-cleaning of the system: press the control and steam buttons simultaneously for 3 seconds. This operation cleans the ducts and should be done after approximately 15-30 liters of water consumed (or according to the wear of the replaceable anti-scale cartridge).

Note that the steam output of this model can reach up to 100 g/min under a pressure of 5.8 bars - if you are not sure that nothing is coming out, test on a cloth before concluding that nothing is coming out.

For very hard water, you can use a mixture of tap water/drinking water. Never use vinegar or commercial descalers.

User manual BEKO Iron : user manuals and guides in PDF

Models BEKO Iron most viewed

Other categories BEKO

Recent questions about Iron BEKO