Q: What to do when the error E:01 (overflow) remains displayed on the BEKO DIN34320?

The error E:01 indicates that the dishwasher has detected excessive water intake or a leak. Here’s what you need to know: Operation of the safety system When the overflow is detected, the E:01 icon appears on the program screen. The dishwasher automatically switches to safety mode and starts draining the excess water. In most cases, the message disappears automatically once the issue is stabilized. If the error persists If the E:01 icon remains displayed after the system has attempted to drain, this indicates a permanent fault (persistent leak, faulty component, or water intake issue). In this case, you cannot simply

Question 1

How to remove the lower spray arm?

Accepted Answer

On your BEKO DIN36430 dishwasher, the lower spray arm clips off upwards. Here’s how to remove it:

Simply lift the lower wash arm to release it.
Then check that the spray holes are not blocked by debris or limescale.
Take the opportunity to clean the arm if necessary.

This maintenance operation can be performed while cleaning the filter, at least once a week to ensure optimal operation of your appliance.

Question 2

What do all the symbols displayed on the control panel of the dishwasher mean?

Accepted Answer

The BEKO DVN04X20W dishwasher has several indicators and symbols on its control panel that inform you about the program status and maintenance needs:

Program Step Indicators

Washing - Lights up during the washing phase
Drying - Lights up during the drying phase
End - Illuminates when the program is finished

Warning Indicators

Low Salt - Flashes when the regeneration salt needs to be refilled
Low Rinse Aid - Flashes when the rinse aid is low

Function Indicators

Half Load - Indicates that the half load option is activated
Tablet Detergent - Lights up when using tablet detergent
Child Lock - Illuminates when the child lock is activated

Delay Indicators

Delay 3h, 6h, 9h - Flash or stay lit depending on the delay option you have programmed

Refer to your manual for a precise location of each symbol on your appliance's panel.

Question 3

How do I install my BEKO DIN25410 dishwasher?

Accepted Answer

The complete installation manual for the BEKO DIN25410 is available on this page. You can view it directly in the PDF reader or download it.

Key installation steps:

Water connection: Connect the water supply (3/4 inch hose) to the main supply. The appliance consumes 12 liters per cycle.
Drainage: Install the drainage hose to the wastewater outlet.
Leveling: Adjust the adjustable feet to ensure the appliance is perfectly horizontal.
Electricity: Plug into a grounded electrical outlet, 220-240 V, 50 Hz, 10 A.

Before first use: Fill the salt reservoir and the rinse aid compartment. The appliance has automatic indicators to alert you when to refill these reservoirs. Refer to the PDF for precise details on accessing these compartments and the recommended quantities.

Dimensions: Height 85 cm x Width 60 cm x Depth 60 cm. Weight: 50 kg.

Question 4

What accessories and mounting elements are provided with the dishwasher?

Accepted Answer

The BEKO BDIN14421 dishwasher comes complete with all installation elements:

Water inlet hoses (cold and hot water)
Drain hose
Water inlet filter
Adjustable feet for leveling
Brackets and screws for built-in installation (depending on the model)
Complete installation guide

For the precise list of provided accessories, refer to the installation or unpacking section of the PDF manual - all necessary elements for installing the appliance are included in the box.

Question 5

How to install the door on the BEKO DIN34320 built-in model?

Accepted Answer

According to the BEKO DIN34320 manual, installation and electrical connections must be carried out by an Authorized Service Agent. The manufacturer disclaims any responsibility for work carried out by other individuals.

Although the device is designed for built-in installation (dimensions: 84.5 x 59.8 x 60.0 cm), the specific instructions for door assembly are not included in the standard user manual provided with the device.

What you should do:

Look for the specific installation manual provided in a separate pouch upon delivery (distinct from the user manual)
Contact a BEKO authorized technician for this operation - it is a contractual obligation
Consult BEKO France customer service to obtain the precise assembly instructions tailored to your configuration

If your device arrived without a door or if you need to replace it, the retailer or BEKO service can provide you with the specific installation document or arrange for the technician's intervention.

Question 6

Should a detergent tablet be used for the P0 InnerClean tub cleaning program?

Accepted Answer

No, the P0 InnerClean program of the BEKO DIS35020 should not be used with a standard detergent tablet.

According to the manual, you should instead use a specialized dishwasher cleaning product (machine cleaning agent). The program operates at very high temperatures and is specifically designed to clean the inside of the tub, not to wash dishes.

Usage details for the P0 program:

Duration: approximately 75 minutes (1h15)
Empty machine: run the program without any dishes inside
Frequency: once every 1-2 months to maintain hygiene and the lifespan of the appliance
Required product: specialized cleaning agent for machines, not an ordinary tablet

Important: before starting the cleaning program, unplug the appliance and turn off the water supply tap.

Question 7

What to do when the error E:01 (overflow) remains displayed on the BEKO DIN34320?

Accepted Answer

The error E:01 indicates that the dishwasher has detected excessive water intake or a leak. Here’s what you need to know:

Operation of the safety system

When the overflow is detected, the E:01 icon appears on the program screen.
The dishwasher automatically switches to safety mode and starts draining the excess water.
In most cases, the message disappears automatically once the issue is stabilized.

If the error persists

If the E:01 icon remains displayed after the system has attempted to drain, this indicates a permanent fault (persistent leak, faulty component, or water intake issue). In this case, you cannot simply

User manual BEKO Dishwasher : user manuals and guides in PDF

Models BEKO Dishwasher most viewed

Other categories BEKO

Recent questions about Dishwasher BEKO