BDIS16020 - Dishwasher BEKO - Free user manual and instructions
Find the device manual for free BDIS16020 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in dishwasher |
| Place settings | 12 standard place settings |
| Width | 60 cm |
| Height | 81.5 cm (adjustable) |
| Depth | 55 cm |
| Net weight | 42 kg |
| Voltage | 220-240 V~ |
| Frequency | 50 Hz |
| Energy efficiency class | E |
| Noise level | 47 dB |
| Water consumption per cycle | 9.5 L |
| Number of programs | 5 |
| Wash programs | Eco 50°C, Intensive 70°C, Quick 30°C, Glass Care 40°C, Daily 60°C |
| Drying system | Active drying with heat exchanger |
| Control type | Electronic push buttons with LED display |
| Delay timer | Up to 24 h |
| Water connection | Cold water only |
| Remaining time display | Yes |
| Overflow protection | Aqua Safe system |
| Child lock | Yes |
| Cutlery basket | Removable |
| Rinse aid indicator | Yes |
| Salt indicator | Yes |
| Spare parts availability | 10 years |
| Cleaning recommendations | Clean filters and spray arms regularly |
Frequently Asked Questions - BDIS16020 BEKO
How to install a BEKO BDIS16020 dishwasher?
Ensure the appliance is level on a solid floor. Connect the water inlet to a cold water supply (max 60°C), attach the drain hose to a siphon, and plug into an earthed socket. Use a built-in installation kit if you are integrating the unit under a countertop.
What are the recommended detergent and rinse aid?
Use a detergent specifically for dishwashers (powder, gel, or tablets). Also fill the rinse aid dispenser to improve drying. In areas with hard water, add dishwasher salt to the water softener.
What should I do if dishes are not drying properly?
Check the rinse aid level and increase the dose if necessary. Select a program with a higher drying temperature or use the extra drying option if available. Make sure the dishes are not blocking the spray arms.
How do I clean the filters?
Remove the cylindrical filter and flat filter located at the bottom of the tub. Rinse them under running water, scrubbing gently with a soft brush. Clean the filters every few cycles to prevent clogging and ensure optimal washing.
What does error code E1 mean?
E1 indicates a water supply failure. Check that the water tap is open, the inlet hose is not kinked, and the water pressure is sufficient. Also inspect the Aqua Safe valve for any damage.
Can I open the door during a cycle to add a dish?
Yes. The machine will pause when the door is opened. Wait for the spray arms to stop, then add the dish. Close the door and press Start to resume the cycle.
How to use the delay timer?
Press the delay button to select a delay of 1 to 24 hours. Close the door and the dishwasher will automatically start after the delay. This is useful for taking advantage of off-peak electricity rates.
What type of salt should I use for the water softener?
Use coarse-grained dishwasher salt, never table salt. Fill the salt reservoir until it is full (about 1.2 kg) and add water before the first use. The low salt indicator will light up when refilling is needed.
How to remove bad odours from the dishwasher?
Run an empty maintenance cycle with a dishwasher cleaner or place a cup of baking soda on the top rack. Regularly cleaning the filters and door seal also prevents odour build-up.
Is the BEKO BDIS16020 repairable?
Yes, Beko supplies spare parts for at least 10 years after purchase. Authorized service centres can replace heating elements, pumps, door seals and other components.
User questions about BDIS16020 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual BDIS16020 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BDIS16020 by BEKO.