BDIN16444 - Dishwasher BEKO - Free user manual and instructions
Find the device manual for free BDIN16444 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Installation Type | Fully Built-in / Integrated |
| Energy Efficiency Class | A++ |
| Capacity | 14 Place Settings |
| Dimensions (H × W × D) | 81.8 cm × 59.8 cm × 57 cm |
| Noise Level | 44 dB |
| Number of Programs | 8 |
| Programs | Intensive 70°, Auto 45-65°, Eco 50°, Standard 60°, Quick 30 min, Mini, Glass, Pre-wash |
| Half Load Option | Yes |
| Delay Start | Up to 24 Hours |
| Water Consumption per Cycle | 9.5 Liters |
| Annual Energy Consumption | 280 kWh |
| Annual Water Consumption | 2660 Liters |
| Drying System | Heat Exchanger (ComfortDry) |
| Adjustable Upper Basket | Yes, 2-Position |
| Cutlery Tray | Yes (Third Basket) |
| Interior LED Lighting | Yes |
| Electronic Controls | Yes (LED Display) |
| Water Protection System | AquaSafe |
| Cleaning and Maintenance | Self-Cleaning Stainless Steel Filter, Periodic Spray Arm Check |
| Spare Parts Availability | 10 Years |
| Repairability Index | 8.5/10 |
Frequently Asked Questions - BDIN16444 BEKO
How do I install the dishwasher correctly?
Installation requires a suitable cabinet opening, water supply (hot or cold), drain hose, and power connection. Ensure the appliance is level and securely fixed. For detailed steps, consult your user manual.
How much salt should I add to the dishwasher?
Add dishwasher salt to the dedicated reservoir until it is full, typically about 1 kg. Use a funnel and run a short cycle afterwards to avoid oversaturating. The salt container is located at the bottom of the tub.
How do I clean the dishwasher filter?
The filter system is self-cleaning, but you should check and rinse it every 2-4 weeks. Remove the lower spray arm and filter assembly, rinse under running water, and replace securely. This prevents clogging and ensures optimal performance.
Why is the dishwasher not draining?
Check the drain hose for kinks or blockages. Clean the filter and ensure the sink drain is not clogged. If the problem persists, inspect the drain pump for obstructions.
How do I choose the right program for my dishes?
Use Eco 50° for normally soiled dishes to save energy. Select Intensive 70° for pots and pans, Quick 30 min for lightly soiled loads, and Glass for delicate items. Refer to the cycle description in your manual.
Can I open the dishwasher during a cycle?
You can open the door at any time for safety, but keep in mind that hot steam may escape. Closing it will resume the cycle. For best results, avoid opening during drying phase to prevent water spots.
Why aren't the dishes getting clean?
Check that you’re not overloading, that spray arms are not blocked, and that detergent and rinse aid are properly filled. Clean the filters and ensure the water pressure is adequate.
What does the error code on the display mean?
Error codes indicate specific issues, such as water inlet or drain problems. Refer to the troubleshooting table in your manual. For persistent errors, contact customer support.
Is the dishwasher safe for pots and pans?
Yes, with the Intensive program you can wash heavily soiled cookware. However, avoid placing wooden, cast iron without enamel, or hand-wash-only items in the dishwasher.
How can I maintain the dishwasher to extend its lifespan?
Regularly clean the filter and spray arms, wipe the door seals, run an empty maintenance cycle with a dishwasher cleaner monthly, and keep the ventilation slots clear.
User questions about BDIN16444 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual BDIN16444 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BDIN16444 by BEKO.