Why does my BEKO VRT 95929 VI vacuum cleaner have poor suction and how can I resolve this issue?

Question

Accepted Answer

Your BEKO VRT 95929 VI vacuum cleaner may have poor suction for several common reasons. Most of the time, poor suction is due to the filters or a blockage in the suction pathway. Fortunately, you can resolve most of these issues yourself by following the maintenance steps detailed below.

Step 1: Check and empty the dust container
Start by completely emptying the dust container after each use, as if it is full, suction significantly decreases. Press the lid opening button of the container (12) to empty it. Also, clean the inside of the container with a damp cloth.

Step 2: Clean the filters regularly
Clogged filters are the most common cause of poor suction. You need to clean the metal filter and the foam filter by gently tapping them against a hard surface (like a trash can) to remove dust. Once a month, wash them under cold running water and let them dry completely for 24 to 48 hours before putting them back in place. Never use hot water, as it damages the structure of the filters. Additionally, regularly clean the EPA E12 filter by tapping it (do not wash it). If you see a filter cleaning animation appear on the screen, it is a signal that it is time to clean the filters immediately.

Step 3: Inspect and clean the motorized brush
Hair, fur, or other materials can get tangled around the main roller, blocking its rotation and reducing suction. To access it, hold down the roller unlock tab to open the lock in the direction of the arrow, turn the roller cover towards you, and pull it to the left. Carefully remove hair and fur by cutting them if necessary with scissors. Never wash the motorized brush to avoid damaging the motor.

Step 4: Check the suction pathways
A blockage in the flexible tube, the connection with the brush, or the suction nozzle can also cause poor suction. If you see a blockage animation on the screen, detach the brush from the tube and carefully inspect both ends of the flexible tube to remove any debris or foreign material. Also, inspect the connection point between the brush and the tube, as well as the suction nozzle of the device body.

Important to remember: If after these cleanings the suction power remains low, the filters may have been deformed by heavy use and will need to be replaced. Contact BEKO customer service to purchase new filters. Similarly, if the battery lasts only a very short time after a full charge (4 to 5 hours minimum), the battery may be at the end of its life and will need to be replaced.

User manual BEKO Broom : user manuals and guides in PDF

Models BEKO Broom most viewed

Other categories BEKO

Recent questions about Broom BEKO